Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.c

Revision:

226:b062af740e40

Parent:

106:ced8cbb51063

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.c	Wed Jun 11 09:30:07 2014 +0100
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.c	Wed Jun 11 09:45:09 2014 +0100
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_flash.c
   * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    18-February-2014
+  * @version V1.1.0RC2
+  * @date    14-May-2014
   * @brief   FLASH HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the internal FLASH memory:
@@ -212,7 +212,7 @@
   * @param  Address:  specifies the address to be programmed.
   * @param  Data: specifies the data to be programmed
   * 
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
 {
@@ -387,11 +387,11 @@
 /**
   * @brief  FLASH end of operation interrupt callback
   * @param  ReturnValue: The value saved in this parameter depends on the ongoing procedure
-  *                 - Mass Erase: Bank number which has been requested to erase
-  *                 - Sectors Erase: Sector which has been erased 
+  *                  Mass Erase: Bank number which has been requested to erase
+  *                  Sectors Erase: Sector which has been erased 
   *                    (if 0xFFFFFFFF, it means that all the selected sectors have been erased)
-  *                 - Program: Address which was selected for data program
-  * @retval none
+  *                  Program: Address which was selected for data program
+  * @retval None
   */
 __weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
 {
@@ -403,10 +403,10 @@
 /**
   * @brief  FLASH operation error interrupt callback
   * @param  ReturnValue: The value saved in this parameter depends on the ongoing procedure
-  *                 - Mass Erase: Bank number which has been requested to erase
-  *                 - Sectors Erase: Sector number which returned an error
-  *                 - Program: Address which was selected for data program
-  * @retval none
+  *                 Mass Erase: Bank number which has been requested to erase
+  *                 Sectors Erase: Sector number which returned an error
+  *                 Program: Address which was selected for data program
+  * @retval None
   */
 __weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
 {
@@ -437,7 +437,7 @@
 /**
   * @brief  Unlock the FLASH control register access
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASH_Unlock(void)
 {
@@ -458,7 +458,7 @@
 /**
   * @brief  Locks the FLASH control register access
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASH_Lock(void)
 {
@@ -472,7 +472,7 @@
 /**
   * @brief  Unlock the FLASH Option Control Registers access.
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
 {
@@ -493,7 +493,7 @@
 /**
   * @brief  Lock the FLASH Option Control Registers access.
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status 
+  * @retval HAL Status 
   */
 HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
 {
@@ -506,7 +506,7 @@
 /**
   * @brief  Launch the option byte loading.
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
 {
@@ -529,7 +529,7 @@
                 ##### Peripheral Errors functions #####
  ===============================================================================  
     [..]
-    This subsection permit to get in run-time Errors of the FLASH peripheral.
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
 
 @endverbatim
   * @{
@@ -558,7 +558,7 @@
 /**
   * @brief  Wait for a FLASH operation to complete.
   * @param  Timeout: maximum flash operationtimeout
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
 {