Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.c

Revision:

226:b062af740e40

Parent:

106:ced8cbb51063

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.c	Wed Jun 11 09:30:07 2014 +0100
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.c	Wed Jun 11 09:45:09 2014 +0100
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dac_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    18-February-2014
+  * @version V1.1.0RC2
+  * @date    14-May-2014
   * @brief   DAC HAL module driver.
   *         This file provides firmware functions to manage the following 
   *         functionalities of DAC extension peripheral:
@@ -123,8 +123,7 @@
   *         the configuration information for the specified DAC.
   * @param  Channel: The selected DAC channel. 
   *          This parameter can be one of the following values:
-  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
-  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  *            DAC_CHANNEL_1 / DAC_CHANNEL_2
   * @param  Amplitude: Select max triangle amplitude. 
   *          This parameter can be one of the following values:
   *            @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
@@ -172,8 +171,7 @@
   *         the configuration information for the specified DAC. 
   * @param  Channel: The selected DAC channel. 
   *          This parameter can be one of the following values:
-  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
-  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  *            DAC_CHANNEL_1 / DAC_CHANNEL_2
   * @param  Amplitude: Unmask DAC channel LFSR for noise wave generation. 
   *          This parameter can be one of the following values: 
   *            @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
@@ -221,9 +219,9 @@
   *               the configuration information for the specified DAC.
   * @param  Alignment: Specifies the data alignment for dual channel DAC.
   *          This parameter can be one of the following values:
-  *            @arg DAC_Align_8b_R: 8bit right data alignment selected
-  *            @arg DAC_Align_12b_L: 12bit left data alignment selected
-  *            @arg DAC_Align_12b_R: 12bit right data alignment selected
+  *            DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            DAC_ALIGN_12B_R: 12bit right data alignment selected
   * @param  Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
   * @param  Data2: Data for DAC Channel1 to be loaded in the selected data  holding register.
   * @note   In dual mode, a unique register access is required to write in both
@@ -317,7 +315,8 @@
 
 /**
   * @brief  DMA conversion complete callback. 
-  * @param  hdma: pointer to DMA handle.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
   * @retval None
   */
 void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)   
@@ -331,7 +330,8 @@
 
 /**
   * @brief  DMA half transfer complete callback. 
-  * @param  hdma: pointer to DMA handle.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
   * @retval None
   */
 void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)   
@@ -343,7 +343,8 @@
 
 /**
   * @brief  DMA error callback 
-  * @param  hdma: pointer to DMA handle.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
   * @retval None
   */
 void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)