mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_ARM_STD/TARGET_LPC11CXX/startup_LPC11xx.s
- Revision:
- 30:91c1d09ada54
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_ARM_STD/TARGET_LPC11CXX/startup_LPC11xx.s Wed Sep 25 10:30:04 2013 +0100 @@ -0,0 +1,292 @@ +;/***************************************************************************** +; * @file: startup_LPC11xx.s +; * @purpose: CMSIS Cortex-M0 Core Device Startup File +; * for the NXP LPC11xx Device Series +; * @version: V1.0 +; * @date: 25. Nov. 2008 +; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +; * +; * Copyright (C) 2008 ARM Limited. All rights reserved. +; * ARM Limited (ARM) is supplying this software for use with Cortex-M0 +; * processor based microcontrollers. This file can be freely distributed +; * within development tools that are supporting such ARM based processors. +; * +; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED +; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF +; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. +; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR +; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. +; * +; *****************************************************************************/ + +__initial_sp EQU 0x10002000 ; Top of RAM from LPC1114 + + PRESERVE8 + THUMB + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + DCD SLWU_INT0_IRQHandler ; Start logic wake-up interrupt 0 + DCD SLWU_INT1_IRQHandler ; Start logic wake-up interrupt 1 + DCD SLWU_INT2_IRQHandler ; Start logic wake-up interrupt 2 + DCD SLWU_INT3_IRQHandler ; Start logic wake-up interrupt 3 + DCD SLWU_INT4_IRQHandler ; Start logic wake-up interrupt 4 + DCD SLWU_INT5_IRQHandler ; Start logic wake-up interrupt 5 + DCD SLWU_INT6_IRQHandler ; Start logic wake-up interrupt 6 + DCD SLWU_INT7_IRQHandler ; Start logic wake-up interrupt 7 + DCD SLWU_INT8_IRQHandler ; Start logic wake-up interrupt 8 + DCD SLWU_INT9_IRQHandler ; Start logic wake-up interrupt 9 + DCD SLWU_INT10_IRQHandler ; Start logic wake-up interrupt 10 + DCD SLWU_INT11_IRQHandler ; Start logic wake-up interrupt 11 + DCD SLWU_INT12_IRQHandler ; Start logic wake-up interrupt 12 + DCD C_CAN_IRQHandler ; C_CAN + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD Reserved_IRQHandler ; Reserved + DCD PIO_3_IRQHandler ; GPIO interrupt status of port 3 + DCD PIO_2_IRQHandler ; GPIO interrupt status of port 2 + DCD PIO_1_IRQHandler ; GPIO interrupt status of port 1 + DCD PIO_0_IRQHandler ; GPIO interrupt status of port 0 + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + IF :LNOT::DEF:NO_CRP + AREA |.ARM.__at_0x02FC|, CODE, READONLY +CRP_Key DCD 0xFFFFFFFF + ENDIF + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +; now, under COMMON NMI.c and NMI.h, a real NMI handler is created if NMI is enabled +; for particular peripheral. +;NMI_Handler PROC +; EXPORT NMI_Handler [WEAK] +; B . +; ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP +Reserved_IRQHandler PROC + EXPORT Reserved_IRQHandler [WEAK] + B . + ENDP + +Default_Handler PROC +; for LPC1114 + EXPORT NMI_Handler [WEAK] + EXPORT SLWU_INT0_IRQHandler [WEAK] + EXPORT SLWU_INT1_IRQHandler [WEAK] + EXPORT SLWU_INT2_IRQHandler [WEAK] + EXPORT SLWU_INT3_IRQHandler [WEAK] + EXPORT SLWU_INT4_IRQHandler [WEAK] + EXPORT SLWU_INT5_IRQHandler [WEAK] + EXPORT SLWU_INT6_IRQHandler [WEAK] + EXPORT SLWU_INT7_IRQHandler [WEAK] + EXPORT SLWU_INT8_IRQHandler [WEAK] + EXPORT SLWU_INT9_IRQHandler [WEAK] + EXPORT SLWU_INT10_IRQHandler [WEAK] + EXPORT SLWU_INT11_IRQHandler [WEAK] + EXPORT SLWU_INT12_IRQHandler [WEAK] + EXPORT C_CAN_IRQHandler [WEAK] + EXPORT SSP1_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT TIMER16_0_IRQHandler [WEAK] + EXPORT TIMER16_1_IRQHandler [WEAK] + EXPORT TIMER32_0_IRQHandler [WEAK] + EXPORT TIMER32_1_IRQHandler [WEAK] + EXPORT SSP0_IRQHandler [WEAK] + EXPORT UART_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT WDT_IRQHandler [WEAK] + EXPORT BOD_IRQHandler [WEAK] + EXPORT PIO_3_IRQHandler [WEAK] + EXPORT PIO_2_IRQHandler [WEAK] + EXPORT PIO_1_IRQHandler [WEAK] + EXPORT PIO_0_IRQHandler [WEAK] + +NMI_Handler + +SLWU_INT0_IRQHandler +SLWU_INT1_IRQHandler +SLWU_INT2_IRQHandler +SLWU_INT3_IRQHandler +SLWU_INT4_IRQHandler +SLWU_INT5_IRQHandler +SLWU_INT6_IRQHandler +SLWU_INT7_IRQHandler +SLWU_INT8_IRQHandler +SLWU_INT9_IRQHandler +SLWU_INT10_IRQHandler +SLWU_INT11_IRQHandler +SLWU_INT12_IRQHandler +C_CAN_IRQHandler +SSP1_IRQHandler +I2C_IRQHandler +TIMER16_0_IRQHandler +TIMER16_1_IRQHandler +TIMER32_0_IRQHandler +TIMER32_1_IRQHandler +SSP0_IRQHandler +UART_IRQHandler +ADC_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +PIO_3_IRQHandler +PIO_2_IRQHandler +PIO_1_IRQHandler +PIO_0_IRQHandler + + B . + + ENDP + + ALIGN + END