mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_flash_ex.h
- Revision:
- 242:7074e42da0b2
- Parent:
- 133:d4dda5c437f0
--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_flash_ex.h Thu Jun 26 10:30:09 2014 +0100 +++ b/targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_flash_ex.h Fri Jun 27 07:30:09 2014 +0100 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f4xx_hal_flash_ex.h * @author MCD Application Team - * @version V1.0.0 - * @date 18-February-2014 + * @version V1.1.0RC2 + * @date 14-May-2014 * @brief Header file of FLASH HAL Extension module. ****************************************************************************** * @attention @@ -61,19 +61,19 @@ */ typedef struct { - uint32_t TypeErase; /*!< TypeErase: Mass erase or sector Erase. + uint32_t TypeErase; /*!< Mass erase or sector Erase. This parameter can be a value of @ref FLASHEx_Type_Erase */ - uint32_t Banks; /*!< Banks: Select banks to erase when Mass erase is enabled + uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. This parameter must be a value of @ref FLASHEx_Banks */ - uint32_t Sector; /*!< Sector: Initial FLASH sector to erase when Mass erase is disabled + uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled This parameter must be a value of @ref FLASHEx_Sectors */ - uint32_t NbSectors; /*!< NbSectors: Number of sectors to be erased. + uint32_t NbSectors; /*!< Number of sectors to be erased. This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ - uint32_t VoltageRange;/*!< VoltageRange: The device voltage range which defines the erase parallelism + uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism This parameter must be a value of @ref FLASHEx_Voltage_Range */ } FLASH_EraseInitTypeDef; @@ -83,26 +83,25 @@ */ typedef struct { - uint32_t OptionType; /*!< OptionType: Option byte to be configured. + uint32_t OptionType; /*!< Option byte to be configured. This parameter can be a value of @ref FLASHEx_Option_Type */ - uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + uint32_t WRPState; /*!< Write protection activation or deactivation. This parameter can be a value of @ref FLASHEx_WRP_State */ - uint32_t WRPSector; /*!< WRPSector: specifies the sector(s) to be write protected + uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. The value of this parameter depend on device used within the same series */ - uint32_t Banks; /*!< Banks: Select banks for WRP activation/deactivation of all sectors + uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. This parameter must be a value of @ref FLASHEx_Banks */ - uint32_t RDPLevel; /*!< RDPLevel: Set the read protection level.. + uint32_t RDPLevel; /*!< Set the read protection level. This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ - uint32_t BORLevel; /*!< BORLevel: Set the BOR Level. + uint32_t BORLevel; /*!< Set the BOR Level. This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ - uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - This parameter can be a combination of @ref FLASHEx_Option_Bytes_IWatchdog, @ref FLASHEx_Option_Bytes_nRST_STOP and @ref FLASHEx_Option_Bytes_nRST_STDBY*/ + uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */ } FLASH_OBProgramInitTypeDef; @@ -112,27 +111,27 @@ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F401xC) || defined(STM32F401xE) typedef struct { - uint32_t OptionType; /*!< OptionType: Option byte to be configured for extension . + uint32_t OptionType; /*!< Option byte to be configured for extension. This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */ - uint32_t PCROPState; /*!< PCROPState: PCROP activation or deactivation. + uint32_t PCROPState; /*!< PCROP activation or deactivation. This parameter can be a value of @ref FLASHEx_PCROP_State */ #if defined (STM32F401xC) || defined (STM32F401xE) - uint16_t Sectors; /*!< Sectors: specifies the sector(s) set for PCROP + uint16_t Sectors; /*!< specifies the sector(s) set for PCROP. This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ #endif /* STM32F401xC || STM32F401xE */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - uint32_t Banks; /*!< Banks: Select banks for PCROP activation/deactivation of all sectors + uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors. This parameter must be a value of @ref FLASHEx_Banks */ - uint16_t SectorsBank1; /*!< SectorsBank1: specifies the sector(s) set for PCROP for Bank1 + uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1. This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - uint16_t SectorsBank2; /*!< SectorsBank2: specifies the sector(s) set for PCROP for Bank2 + uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2. This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - uint8_t BootConfig; /*!< BootConfig: specifies Option bytes for boot config + uint8_t BootConfig; /*!< Specifies Option bytes for boot config. This parameter can be a value of @ref FLASHEx_Dual_Boot */ #endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */