mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_dac_ex.c
- Revision:
- 242:7074e42da0b2
- Parent:
- 133:d4dda5c437f0
--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_dac_ex.c Thu Jun 26 10:30:09 2014 +0100 +++ b/targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_dac_ex.c Fri Jun 27 07:30:09 2014 +0100 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f4xx_hal_dac_ex.c * @author MCD Application Team - * @version V1.0.0 - * @date 18-February-2014 + * @version V1.1.0RC2 + * @date 14-May-2014 * @brief DAC HAL module driver. * This file provides firmware functions to manage the following * functionalities of DAC extension peripheral: @@ -123,8 +123,7 @@ * the configuration information for the specified DAC. * @param Channel: The selected DAC channel. * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected + * DAC_CHANNEL_1 / DAC_CHANNEL_2 * @param Amplitude: Select max triangle amplitude. * This parameter can be one of the following values: * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 @@ -172,8 +171,7 @@ * the configuration information for the specified DAC. * @param Channel: The selected DAC channel. * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected + * DAC_CHANNEL_1 / DAC_CHANNEL_2 * @param Amplitude: Unmask DAC channel LFSR for noise wave generation. * This parameter can be one of the following values: * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation @@ -221,9 +219,9 @@ * the configuration information for the specified DAC. * @param Alignment: Specifies the data alignment for dual channel DAC. * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignment selected - * @arg DAC_Align_12b_L: 12bit left data alignment selected - * @arg DAC_Align_12b_R: 12bit right data alignment selected + * DAC_ALIGN_8B_R: 8bit right data alignment selected + * DAC_ALIGN_12B_L: 12bit left data alignment selected + * DAC_ALIGN_12B_R: 12bit right data alignment selected * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register. * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register. * @note In dual mode, a unique register access is required to write in both @@ -317,7 +315,8 @@ /** * @brief DMA conversion complete callback. - * @param hdma: pointer to DMA handle. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. * @retval None */ void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) @@ -331,7 +330,8 @@ /** * @brief DMA half transfer complete callback. - * @param hdma: pointer to DMA handle. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. * @retval None */ void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) @@ -343,7 +343,8 @@ /** * @brief DMA error callback - * @param hdma: pointer to DMA handle. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. * @retval None */ void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)