mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_STM/TARGET_DISCO_F407VG/analogout_api.c
- Revision:
- 141:706f8dea204a
- Child:
- 242:7074e42da0b2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/analogout_api.c Tue Apr 01 16:45:06 2014 +0100 @@ -0,0 +1,160 @@ +/* mbed Microcontroller Library + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "analogout_api.h" + +#if DEVICE_ANALOGOUT + +#include "cmsis.h" +#include "pinmap.h" +#include "error.h" +#include "stm32f4xx_hal.h" + +#define RANGE_12BIT (0xFFF) + +DAC_HandleTypeDef DacHandle; +static DAC_ChannelConfTypeDef sConfig; + +static const PinMap PinMap_DAC[] = { + {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1 + {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2 + {NC, NC, 0} +}; + +void analogout_init(dac_t *obj, PinName pin) +{ + uint32_t channel ; + HAL_StatusTypeDef status; + + // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object + obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC); + + if (obj->dac == (DACName)NC) { + error("DAC pin mapping failed"); + } + + // Configure GPIO + pinmap_pinout(pin, PinMap_DAC); + + // Save the channel for the write and read functions + obj->channel = pin; + + __GPIOA_CLK_ENABLE(); + + __DAC_CLK_ENABLE(); + + DacHandle.Instance = DAC; + + status = HAL_DAC_Init(&DacHandle); + if ( status != HAL_OK ) { + error("HAL_DAC_Init failed"); + } + + sConfig.DAC_Trigger = DAC_TRIGGER_NONE; + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + + if (obj->channel == PA_4) { + channel = DAC_CHANNEL_1; + } else { + channel = DAC_CHANNEL_2; + } + + if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) { + error("HAL_DAC_ConfigChannel failed"); + } + + if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) { + error("HAL_DAC_Start failed"); + } + + if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) { + error("HAL_DAC_SetValue failed"); + } + +} + +void analogout_free(dac_t *obj) +{ +} + +static inline void dac_write(dac_t *obj, uint16_t value) +{ + HAL_StatusTypeDef status; + + if (obj->channel == PA_4) { + status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value); + } else if (obj->channel == PA_5) { + status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value); + } + + if ( status != HAL_OK ) { + error("ADC pin mapping failed"); + } +} + +static inline int dac_read(dac_t *obj) +{ + if (obj->channel == PA_4) { + return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1); + } else if (obj->channel == PA_5) { + return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2); + } +} + +void analogout_write(dac_t *obj, float value) +{ + if (value < 0.0f) { + dac_write(obj, 0); // Min value + } else if (value > 1.0f) { + dac_write(obj, (uint16_t)RANGE_12BIT); // Max value + } else { + dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT)); + } +} + +void analogout_write_u16(dac_t *obj, uint16_t value) +{ + if (value > (uint16_t)RANGE_12BIT) { + value = (uint16_t)RANGE_12BIT; // Max value + } + + dac_write(obj, value); +} + +float analogout_read(dac_t *obj) +{ + + uint32_t value = dac_read(obj); + return (float)value * (1.0f / (float)RANGE_12BIT); +} + +uint16_t analogout_read_u16(dac_t *obj) +{ + return (uint16_t)dac_read(obj); +} + +#endif // DEVICE_ANALOGOUT