shao ziyang
mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.c
- Revision:
- 80:66393a7b209d
- Parent:
- 76:aeb1df146756
- Child:
- 106:ced8cbb51063
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.c Thu Jan 30 09:45:05 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.c Thu Jan 30 12:15:05 2014 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32l1xx_flash.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 22-February-2013
+ * @version V1.3.0
+ * @date 31-January-2014
* @brief This file provides all the Flash firmware functions. These functions
* can be executed from Internal FLASH or Internal SRAM memories.
* The functions that should be called from SRAM are defined inside
@@ -75,7 +75,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
@@ -497,11 +497,11 @@
/**
* @brief Erase a byte in data memory.
* @param Address: specifies the address to be erased.
- * @note This function can be used only for STM32L1XX_HD and STM32L1XX_MDP
- * density devices.
+ * @note This function can be used only for STM32L1XX_HD, STM32L1XX_MDP and
+ * STM32L1XX_XL devices.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @retval FLASH Status: The returned value can be:
@@ -530,11 +530,11 @@
/**
* @brief Erase a halfword in data memory.
* @param Address: specifies the address to be erased.
- * @note This function can be used only for STM32L1XX_HD and STM32L1XX_MDP
- * density devices.
+ * @note This function can be used only for STM32L1XX_HD, STM32L1XX_MDP and
+ * STM32L1XX_XL devices.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @retval FLASH Status: The returned value can be:
@@ -567,7 +567,7 @@
* if the address to load is the start address of a word (multiple of a word).
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @retval FLASH Status: The returned value can be:
@@ -597,7 +597,7 @@
* @brief Write a Byte at a specified address in data memory.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @param Address: specifies the address to be written.
@@ -609,7 +609,7 @@
FLASH_Status DATA_EEPROM_FastProgramByte(uint32_t Address, uint8_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
uint32_t tmp = 0, tmpaddr = 0;
#endif
@@ -624,7 +624,7 @@
/* Clear the FTDW bit */
FLASH->PECR &= (uint32_t)(~((uint32_t)FLASH_PECR_FTDW));
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
if(Data != (uint8_t)0x00)
{
/* If the previous operation is completed, proceed to write the new Data */
@@ -642,7 +642,7 @@
status = DATA_EEPROM_EraseWord(Address & 0xFFFFFFFC);
status = DATA_EEPROM_FastProgramWord((Address & 0xFFFFFFFC), tmp);
}
-#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP)
+#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP) || defined (STM32L1XX_XL)
/* If the previous operation is completed, proceed to write the new Data */
*(__IO uint8_t *)Address = Data;
@@ -658,7 +658,7 @@
* @brief Writes a half word at a specified address in data memory.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @param Address: specifies the address to be written.
@@ -670,7 +670,7 @@
FLASH_Status DATA_EEPROM_FastProgramHalfWord(uint32_t Address, uint16_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
uint32_t tmp = 0, tmpaddr = 0;
#endif
@@ -685,7 +685,7 @@
/* Clear the FTDW bit */
FLASH->PECR &= (uint32_t)(~((uint32_t)FLASH_PECR_FTDW));
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
if(Data != (uint16_t)0x0000)
{
/* If the previous operation is completed, proceed to write the new data */
@@ -711,7 +711,7 @@
DATA_EEPROM_FastProgramByte(Address + 1, 0x00);
}
}
-#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP)
+#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP) || defined (STM32L1XX_XL)
/* If the previous operation is completed, proceed to write the new data */
*(__IO uint16_t *)Address = Data;
@@ -727,7 +727,7 @@
* @brief Programs a word at a specified address in data memory.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to the data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @param Address: specifies the address to be written.
@@ -765,7 +765,7 @@
* @brief Write a Byte at a specified address in data memory without erase.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @note The function DATA_EEPROM_FixedTimeProgramCmd() can be called before
@@ -778,7 +778,7 @@
FLASH_Status DATA_EEPROM_ProgramByte(uint32_t Address, uint8_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
uint32_t tmp = 0, tmpaddr = 0;
#endif
@@ -790,7 +790,7 @@
if(status == FLASH_COMPLETE)
{
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
if(Data != (uint8_t) 0x00)
{
*(__IO uint8_t *)Address = Data;
@@ -808,7 +808,7 @@
status = DATA_EEPROM_EraseWord(Address & 0xFFFFFFFC);
status = DATA_EEPROM_FastProgramWord((Address & 0xFFFFFFFC), tmp);
}
-#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP)
+#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP) || defined (STM32L1XX_XL)
*(__IO uint8_t *)Address = Data;
/* Wait for last operation to be completed */
@@ -823,7 +823,7 @@
* @brief Writes a half word at a specified address in data memory without erase.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @note The function DATA_EEPROM_FixedTimeProgramCmd() can be called before
@@ -836,7 +836,7 @@
FLASH_Status DATA_EEPROM_ProgramHalfWord(uint32_t Address, uint16_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
uint32_t tmp = 0, tmpaddr = 0;
#endif
@@ -848,7 +848,7 @@
if(status == FLASH_COMPLETE)
{
-#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP)
+#if !defined (STM32L1XX_HD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_XL)
if(Data != (uint16_t)0x0000)
{
*(__IO uint16_t *)Address = Data;
@@ -873,7 +873,7 @@
DATA_EEPROM_FastProgramByte(Address + 1, 0x00);
}
}
-#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP)
+#elif defined (STM32L1XX_HD) || defined (STM32L1XX_MDP) || defined (STM32L1XX_XL)
*(__IO uint16_t *)Address = Data;
/* Wait for last operation to be completed */
@@ -888,7 +888,7 @@
* @brief Programs a word at a specified address in data memory without erase.
* @note To correctly run this function, the DATA_EEPROM_Unlock() function
* must be called before.
- * Call the DATA_EEPROM_Lock() to he data EEPROM access
+ * Call the DATA_EEPROM_Lock() to disable the data EEPROM access
* and Flash program erase control register access(recommended to protect
* the DATA_EEPROM against possible unwanted operation).
* @note The function DATA_EEPROM_FixedTimeProgramCmd() can be called before
@@ -1087,8 +1087,8 @@
/**
* @brief Write protects the desired pages of the second 128KB of the Flash.
- * @note This function can be used only for STM32L1XX_HD and STM32L1XX_MDP
- * density devices.
+ * @note This function can be used only for STM32L1XX_HD, STM32L1XX_MDP and
+ * STM32L1XX_XL devices.
* @param OB_WRP1: specifies the address of the pages to be write protected.
* This parameter can be:
* @arg value between OB_WRP_Pages512to527 and OB_WRP_Pages1008to1023
@@ -1146,7 +1146,7 @@
/**
* @brief Write protects the desired pages of the third 128KB of the Flash.
- * @note This function can be used only for STM32L1XX_HD density devices.
+ * @note This function can be used only for STM32L1XX_HD and STM32L1XX_XL devices.
* @param OB_WRP2: specifies the address of the pages to be write protected.
* This parameter can be:
* @arg value between OB_WRP_Pages1024to1039 and OB_WRP_Pages1520to1535
@@ -1509,7 +1509,7 @@
/**
* @brief Configures to boot from Bank1 or Bank2.
- * @note This function can be used only for STM32L1XX_HD density devices.
+ * @note This function can be used only for STM32L1XX_HD and STM32L1XX_XL devices.
* @param OB_BOOT: select the FLASH Bank to boot from.
* This parameter can be one of the following values:
* @arg OB_BOOT_BANK2: At startup, if boot pins are set in boot from user Flash
@@ -1580,8 +1580,8 @@
/**
* @brief Returns the FLASH Write Protection Option Bytes value.
- * @note This function can be used only for STM32L1XX_HD and STM32L1XX_MDP
- * density devices.
+ * @note This function can be used only for STM32L1XX_HD, STM32L1XX_MDP and
+ * STM32L1XX_XL devices.
* @param None
* @retval The FLASH Write Protection Option Bytes value.
*/
@@ -1593,7 +1593,7 @@
/**
* @brief Returns the FLASH Write Protection Option Bytes value.
- * @note This function can be used only for STM32L1XX_HD density devices.
+ * @note This function can be used only for STM32L1XX_HD and STM32L1XX_XL devices.
* @param None
* @retval The FLASH Write Protection Option Bytes value.
*/