Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/sleep.c

Revision:

60:142c6c6f5949

Child:

70:c1fbde68b492

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/sleep.c	Tue Dec 17 08:45:10 2013 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "sleep_api.h"
+#include "cmsis.h"
+
+static void SYSCLKConfig_STOP(void)
+{
+    ErrorStatus HSEStartUpStatus;
+  
+    RCC_HSEConfig(RCC_HSE_ON); // Enable HSE
+  
+    HSEStartUpStatus = RCC_WaitForHSEStartUp(); // Wait till HSE is ready
+
+    if (HSEStartUpStatus == SUCCESS) {
+        RCC_PLLCmd(ENABLE); // Enable PLL
+        while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) {} // Wait till PLL is ready
+        RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); // Select PLL as system clock source
+        while(RCC_GetSYSCLKSource() != 0x08) {} // Wait till PLL is used as system clock source
+    }
+}
+
+void sleep(void)
+{
+    SCB->SCR = 0; // Normal sleep mode for ARM core
+    __WFI();
+}
+
+void deepsleep(void)
+{    
+    // Enable PWR clock
+    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
+    
+    // Request to enter STOP mode with regulator in low power mode
+    PWR_EnterSTOPMode(PWR_Regulator_LowPower, PWR_STOPEntry_WFI);  
+    
+    // At this stage the system has resumed from STOP mode.
+    // Re-configure the system clock: enable HSE, PLL and select 
+    // PLL as system clock source (because HSE and PLL are disabled in STOP mode).
+    SYSCLKConfig_STOP();
+}