mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/system_stm32f4xx.c
- Revision:
- 87:085cde657901
- Child:
- 106:ced8cbb51063
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/system_stm32f4xx.c Sat Feb 08 19:45:06 2014 +0000 @@ -0,0 +1,522 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @version V0.8.0 + * @date 03-January-2014 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ + +#include "stm32f4xx_hal.h" + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted + on STM324xG_EVAL/STM324x9I_EVAL boards as data memory */ +/* #define DATA_IN_ExtSRAM */ +/* #define DATA_IN_ExtSDRAM */ +#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM) + #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM " +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000; + __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + + // [ADDED FOR MBED] + HAL_Init(); + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 16 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 16 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 8 MHz for the SPI + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); +} + +// [ADDED FOR MBED] +void SysTick_Handler(void) +{ + HAL_IncTick(); +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001FC; + + /* Connect PCx pins to FMC Alternate function */ + GPIOC->AFR[0] = 0x0000000c; + GPIOC->AFR[1] = 0x00007700; + /* Configure PCx pins in Alternate function mode */ + GPIOC->MODER = 0x00a00002; + /* Configure PCx pins speed to 50 MHz */ + GPIOC->OSPEEDR = 0x00a00002; + /* Configure PCx pins Output type to push-pull */ + GPIOC->OTYPER = 0x00000000; + /* No pull-up, pull-down for PCx pins */ + GPIOC->PUPDR = 0x00500000; + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xcccccccc; + GPIOF->AFR[1] = 0xcccccccc; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xcccccccc; + GPIOG->AFR[1] = 0xcccccccc; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xaaaaaaaa; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xaaaaaaaa; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Configure and enable SDRAM bank1 */ + FMC_Bank5_6->SDCR[0] = 0x000029D0; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ + +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00ccc0cc; + GPIOD->AFR[1] = 0xcccccccc; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xaaaa0a8a; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xffff0fcf; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xc00cc0cc; + GPIOE->AFR[1] = 0xcccccccc; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xaaaa828a; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xffffc3cf; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00cccccc; + GPIOF->AFR[1] = 0xcccc0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xaa000aaa; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xff000fff; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00cccccc; + GPIOG->AFR[1] = 0x000000c0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00085aaa; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000cafff; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001011; + FSMC_Bank1->BTCR[3] = 0x00000201; + FSMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#endif /* DATA_IN_ExtSRAM */ + +} +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/