shao ziyang / mbed-src-kl05

mbed library sources

Dependents:   frdm_kl05z_gpio_test

Fork of mbed-src by mbed official

targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h@323:9e901b0a5aa1, 2014-09-13 (annotated)

Committer:
shaoziyang
Date:
Sat Sep 13 14:25:46 2014 +0000
Revision:
323:9e901b0a5aa1
Parent:
218:44081b78fdc2 
test with CLOCK_SETUP = 0

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mbed_official 205:c41fc65bcfb4 1 /**
mbed_official 205:c41fc65bcfb4 2 ******************************************************************************
mbed_official 205:c41fc65bcfb4 3 * @file stm32f0xx_hal_smartcard.h
mbed_official 205:c41fc65bcfb4 4 * @author MCD Application Team
mbed_official 205:c41fc65bcfb4 5 * @version V1.0.0
mbed_official 218:44081b78fdc2 6 * @date 28-May-2014
mbed_official 205:c41fc65bcfb4 7 * @brief Header file of SMARTCARD HAL module.
mbed_official 205:c41fc65bcfb4 8 ******************************************************************************
mbed_official 205:c41fc65bcfb4 9 * @attention
mbed_official 205:c41fc65bcfb4 10 *
mbed_official 205:c41fc65bcfb4 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
mbed_official 205:c41fc65bcfb4 12 *
mbed_official 205:c41fc65bcfb4 13 * Redistribution and use in source and binary forms, with or without modification,
mbed_official 205:c41fc65bcfb4 14 * are permitted provided that the following conditions are met:
mbed_official 205:c41fc65bcfb4 15 * 1. Redistributions of source code must retain the above copyright notice,
mbed_official 205:c41fc65bcfb4 16 * this list of conditions and the following disclaimer.
mbed_official 205:c41fc65bcfb4 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
mbed_official 205:c41fc65bcfb4 18 * this list of conditions and the following disclaimer in the documentation
mbed_official 205:c41fc65bcfb4 19 * and/or other materials provided with the distribution.
mbed_official 205:c41fc65bcfb4 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
mbed_official 205:c41fc65bcfb4 21 * may be used to endorse or promote products derived from this software
mbed_official 205:c41fc65bcfb4 22 * without specific prior written permission.
mbed_official 205:c41fc65bcfb4 23 *
mbed_official 205:c41fc65bcfb4 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
mbed_official 205:c41fc65bcfb4 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
mbed_official 205:c41fc65bcfb4 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
mbed_official 205:c41fc65bcfb4 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
mbed_official 205:c41fc65bcfb4 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
mbed_official 205:c41fc65bcfb4 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
mbed_official 205:c41fc65bcfb4 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
mbed_official 205:c41fc65bcfb4 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
mbed_official 205:c41fc65bcfb4 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
mbed_official 205:c41fc65bcfb4 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
mbed_official 205:c41fc65bcfb4 34 *
mbed_official 205:c41fc65bcfb4 35 ******************************************************************************
mbed_official 205:c41fc65bcfb4 36 */
mbed_official 205:c41fc65bcfb4 37
mbed_official 205:c41fc65bcfb4 38 /* Define to prevent recursive inclusion -------------------------------------*/
mbed_official 205:c41fc65bcfb4 39 #ifndef __STM32F0xx_HAL_SMARTCARD_H
mbed_official 205:c41fc65bcfb4 40 #define __STM32F0xx_HAL_SMARTCARD_H
mbed_official 205:c41fc65bcfb4 41
mbed_official 205:c41fc65bcfb4 42 #ifdef __cplusplus
mbed_official 205:c41fc65bcfb4 43 extern "C" {
mbed_official 205:c41fc65bcfb4 44 #endif
mbed_official 205:c41fc65bcfb4 45
mbed_official 205:c41fc65bcfb4 46 #if !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8)
mbed_official 205:c41fc65bcfb4 47
mbed_official 205:c41fc65bcfb4 48 /* Includes ------------------------------------------------------------------*/
mbed_official 205:c41fc65bcfb4 49 #include "stm32f0xx_hal_def.h"
mbed_official 205:c41fc65bcfb4 50
mbed_official 205:c41fc65bcfb4 51 /** @addtogroup STM32F0xx_HAL_Driver
mbed_official 205:c41fc65bcfb4 52 * @{
mbed_official 205:c41fc65bcfb4 53 */
mbed_official 205:c41fc65bcfb4 54
mbed_official 205:c41fc65bcfb4 55 /** @addtogroup SMARTCARD
mbed_official 205:c41fc65bcfb4 56 * @{
mbed_official 205:c41fc65bcfb4 57 */
mbed_official 205:c41fc65bcfb4 58
mbed_official 205:c41fc65bcfb4 59 /* Exported types ------------------------------------------------------------*/
mbed_official 205:c41fc65bcfb4 60 /**
mbed_official 205:c41fc65bcfb4 61 * @brief SMARTCARD Init Structure definition
mbed_official 205:c41fc65bcfb4 62 */
mbed_official 205:c41fc65bcfb4 63 typedef struct
mbed_official 205:c41fc65bcfb4 64 {
mbed_official 205:c41fc65bcfb4 65 uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
mbed_official 205:c41fc65bcfb4 66 The baud rate register is computed using the following formula:
mbed_official 205:c41fc65bcfb4 67 Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
mbed_official 205:c41fc65bcfb4 68
mbed_official 205:c41fc65bcfb4 69 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
mbed_official 205:c41fc65bcfb4 70 This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
mbed_official 205:c41fc65bcfb4 71
mbed_official 205:c41fc65bcfb4 72 uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
mbed_official 205:c41fc65bcfb4 73 Only 1.5 stop bits are authorized in SmartCard mode. */
mbed_official 205:c41fc65bcfb4 74
mbed_official 205:c41fc65bcfb4 75 uint16_t Parity; /*!< Specifies the parity mode.
mbed_official 205:c41fc65bcfb4 76 This parameter can be a value of @ref SMARTCARD_Parity
mbed_official 205:c41fc65bcfb4 77 @note The parity is enabled by default (PCE is forced to 1).
mbed_official 205:c41fc65bcfb4 78 Since the WordLength is forced to 8 bits + parity, M is
mbed_official 205:c41fc65bcfb4 79 forced to 1 and the parity bit is the 9th bit. */
mbed_official 205:c41fc65bcfb4 80
mbed_official 205:c41fc65bcfb4 81 uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
mbed_official 205:c41fc65bcfb4 82 This parameter can be a value of @ref SMARTCARD_Mode */
mbed_official 205:c41fc65bcfb4 83
mbed_official 205:c41fc65bcfb4 84 uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
mbed_official 205:c41fc65bcfb4 85 This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
mbed_official 205:c41fc65bcfb4 86
mbed_official 205:c41fc65bcfb4 87 uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
mbed_official 205:c41fc65bcfb4 88 This parameter can be a value of @ref SMARTCARD_Clock_Phase */
mbed_official 205:c41fc65bcfb4 89
mbed_official 205:c41fc65bcfb4 90 uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
mbed_official 205:c41fc65bcfb4 91 data bit (MSB) has to be output on the SCLK pin in synchronous mode.
mbed_official 205:c41fc65bcfb4 92 This parameter can be a value of @ref SMARTCARD_Last_Bit */
mbed_official 205:c41fc65bcfb4 93
mbed_official 205:c41fc65bcfb4 94 uint16_t OneBitSampling; /*!< Specifies wether a single sample or three samples' majority vote is selected.
mbed_official 205:c41fc65bcfb4 95 Selecting the single sample method increases the receiver tolerance to clock
mbed_official 205:c41fc65bcfb4 96 deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
mbed_official 205:c41fc65bcfb4 97
mbed_official 205:c41fc65bcfb4 98 uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
mbed_official 205:c41fc65bcfb4 99
mbed_official 205:c41fc65bcfb4 100 uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
mbed_official 205:c41fc65bcfb4 101
mbed_official 205:c41fc65bcfb4 102 uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
mbed_official 205:c41fc65bcfb4 103 in case of parity error.
mbed_official 205:c41fc65bcfb4 104 This parameter can be a value of @ref SMARTCARD_NACK_Enable */
mbed_official 205:c41fc65bcfb4 105
mbed_official 205:c41fc65bcfb4 106 uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
mbed_official 205:c41fc65bcfb4 107 This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
mbed_official 205:c41fc65bcfb4 108
mbed_official 205:c41fc65bcfb4 109 uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
mbed_official 205:c41fc65bcfb4 110 it is used to implement the Character Wait Time (CWT) and
mbed_official 205:c41fc65bcfb4 111 Block Wait Time (BWT). It is coded over 24 bits. */
mbed_official 205:c41fc65bcfb4 112
mbed_official 205:c41fc65bcfb4 113 uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
mbed_official 205:c41fc65bcfb4 114 This parameter can be any value from 0x0 to 0xFF */
mbed_official 205:c41fc65bcfb4 115
mbed_official 205:c41fc65bcfb4 116 uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
mbed_official 205:c41fc65bcfb4 117 receive and transmit mode). When set to 0, retransmission is
mbed_official 205:c41fc65bcfb4 118 disabled. Otherwise, its maximum value is 7 (before signalling
mbed_official 205:c41fc65bcfb4 119 an error) */
mbed_official 205:c41fc65bcfb4 120
mbed_official 205:c41fc65bcfb4 121 }SMARTCARD_InitTypeDef;
mbed_official 205:c41fc65bcfb4 122
mbed_official 205:c41fc65bcfb4 123 /**
mbed_official 205:c41fc65bcfb4 124 * @brief SMARTCARD advanced features initalization structure definition
mbed_official 205:c41fc65bcfb4 125 */
mbed_official 205:c41fc65bcfb4 126 typedef struct
mbed_official 205:c41fc65bcfb4 127 {
mbed_official 205:c41fc65bcfb4 128 uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
mbed_official 205:c41fc65bcfb4 129 advanced features may be initialized at the same time. This parameter
mbed_official 205:c41fc65bcfb4 130 can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
mbed_official 205:c41fc65bcfb4 131
mbed_official 205:c41fc65bcfb4 132 uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
mbed_official 205:c41fc65bcfb4 133 This parameter can be a value of @ref SMARTCARD_Tx_Inv */
mbed_official 205:c41fc65bcfb4 134
mbed_official 205:c41fc65bcfb4 135 uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
mbed_official 205:c41fc65bcfb4 136 This parameter can be a value of @ref SMARTCARD_Rx_Inv */
mbed_official 205:c41fc65bcfb4 137
mbed_official 205:c41fc65bcfb4 138 uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
mbed_official 205:c41fc65bcfb4 139 vs negative/inverted logic).
mbed_official 205:c41fc65bcfb4 140 This parameter can be a value of @ref SMARTCARD_Data_Inv */
mbed_official 205:c41fc65bcfb4 141
mbed_official 205:c41fc65bcfb4 142 uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
mbed_official 205:c41fc65bcfb4 143 This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
mbed_official 205:c41fc65bcfb4 144
mbed_official 205:c41fc65bcfb4 145 uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
mbed_official 205:c41fc65bcfb4 146 This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
mbed_official 205:c41fc65bcfb4 147
mbed_official 205:c41fc65bcfb4 148 uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
mbed_official 205:c41fc65bcfb4 149 This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
mbed_official 205:c41fc65bcfb4 150
mbed_official 205:c41fc65bcfb4 151 uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
mbed_official 205:c41fc65bcfb4 152 This parameter can be a value of @ref SMARTCARD_MSB_First */
mbed_official 205:c41fc65bcfb4 153 }SMARTCARD_AdvFeatureInitTypeDef;
mbed_official 205:c41fc65bcfb4 154
mbed_official 205:c41fc65bcfb4 155 /**
mbed_official 205:c41fc65bcfb4 156 * @brief HAL State structures definition
mbed_official 205:c41fc65bcfb4 157 */
mbed_official 205:c41fc65bcfb4 158 typedef enum
mbed_official 205:c41fc65bcfb4 159 {
mbed_official 205:c41fc65bcfb4 160 HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
mbed_official 205:c41fc65bcfb4 161 HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
mbed_official 205:c41fc65bcfb4 162 HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
mbed_official 205:c41fc65bcfb4 163 HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
mbed_official 205:c41fc65bcfb4 164 HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
mbed_official 205:c41fc65bcfb4 165 HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
mbed_official 205:c41fc65bcfb4 166 HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
mbed_official 205:c41fc65bcfb4 167 HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
mbed_official 205:c41fc65bcfb4 168 }HAL_SMARTCARD_StateTypeDef;
mbed_official 205:c41fc65bcfb4 169
mbed_official 205:c41fc65bcfb4 170 /**
mbed_official 205:c41fc65bcfb4 171 * @brief HAL SMARTCARD Error Code structure definition
mbed_official 205:c41fc65bcfb4 172 */
mbed_official 205:c41fc65bcfb4 173 typedef enum
mbed_official 205:c41fc65bcfb4 174 {
mbed_official 205:c41fc65bcfb4 175 HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
mbed_official 205:c41fc65bcfb4 176 HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
mbed_official 205:c41fc65bcfb4 177 HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
mbed_official 205:c41fc65bcfb4 178 HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
mbed_official 205:c41fc65bcfb4 179 HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
mbed_official 205:c41fc65bcfb4 180 HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
mbed_official 205:c41fc65bcfb4 181 HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
mbed_official 205:c41fc65bcfb4 182 }HAL_SMARTCARD_ErrorTypeDef;
mbed_official 205:c41fc65bcfb4 183
mbed_official 205:c41fc65bcfb4 184 /**
mbed_official 205:c41fc65bcfb4 185 * @brief SMARTCARD clock sources
mbed_official 205:c41fc65bcfb4 186 */
mbed_official 205:c41fc65bcfb4 187 typedef enum
mbed_official 205:c41fc65bcfb4 188 {
mbed_official 205:c41fc65bcfb4 189 SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
mbed_official 205:c41fc65bcfb4 190 SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
mbed_official 205:c41fc65bcfb4 191 SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
mbed_official 205:c41fc65bcfb4 192 SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
mbed_official 205:c41fc65bcfb4 193 SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
mbed_official 205:c41fc65bcfb4 194 }SMARTCARD_ClockSourceTypeDef;
mbed_official 205:c41fc65bcfb4 195
mbed_official 205:c41fc65bcfb4 196 /**
mbed_official 205:c41fc65bcfb4 197 * @brief SMARTCARD handle Structure definition
mbed_official 205:c41fc65bcfb4 198 */
mbed_official 205:c41fc65bcfb4 199 typedef struct
mbed_official 205:c41fc65bcfb4 200 {
mbed_official 205:c41fc65bcfb4 201 USART_TypeDef *Instance; /* USART registers base address */
mbed_official 205:c41fc65bcfb4 202
mbed_official 205:c41fc65bcfb4 203 SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
mbed_official 205:c41fc65bcfb4 204
mbed_official 205:c41fc65bcfb4 205 SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
mbed_official 205:c41fc65bcfb4 206
mbed_official 205:c41fc65bcfb4 207 uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
mbed_official 205:c41fc65bcfb4 208
mbed_official 205:c41fc65bcfb4 209 uint16_t TxXferSize; /* SmartCard Tx Transfer size */
mbed_official 205:c41fc65bcfb4 210
mbed_official 205:c41fc65bcfb4 211 uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
mbed_official 205:c41fc65bcfb4 212
mbed_official 205:c41fc65bcfb4 213 uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
mbed_official 205:c41fc65bcfb4 214
mbed_official 205:c41fc65bcfb4 215 uint16_t RxXferSize; /* SmartCard Rx Transfer size */
mbed_official 205:c41fc65bcfb4 216
mbed_official 205:c41fc65bcfb4 217 uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
mbed_official 205:c41fc65bcfb4 218
mbed_official 205:c41fc65bcfb4 219 DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
mbed_official 205:c41fc65bcfb4 220
mbed_official 205:c41fc65bcfb4 221 DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
mbed_official 205:c41fc65bcfb4 222
mbed_official 205:c41fc65bcfb4 223 HAL_LockTypeDef Lock; /* Locking object */
mbed_official 205:c41fc65bcfb4 224
mbed_official 205:c41fc65bcfb4 225 HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
mbed_official 205:c41fc65bcfb4 226
mbed_official 205:c41fc65bcfb4 227 HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
mbed_official 205:c41fc65bcfb4 228
mbed_official 205:c41fc65bcfb4 229 }SMARTCARD_HandleTypeDef;
mbed_official 205:c41fc65bcfb4 230
mbed_official 205:c41fc65bcfb4 231
mbed_official 205:c41fc65bcfb4 232 /* Exported constants --------------------------------------------------------*/
mbed_official 205:c41fc65bcfb4 233 /** @defgroup SMARTCARD_Exported_Constants
mbed_official 205:c41fc65bcfb4 234 * @{
mbed_official 205:c41fc65bcfb4 235 */
mbed_official 205:c41fc65bcfb4 236
mbed_official 205:c41fc65bcfb4 237 /** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
mbed_official 205:c41fc65bcfb4 238 * @{
mbed_official 205:c41fc65bcfb4 239 */
mbed_official 205:c41fc65bcfb4 240 #define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
mbed_official 205:c41fc65bcfb4 241 #define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
mbed_official 205:c41fc65bcfb4 242 /**
mbed_official 205:c41fc65bcfb4 243 * @}
mbed_official 205:c41fc65bcfb4 244 */
mbed_official 205:c41fc65bcfb4 245
mbed_official 205:c41fc65bcfb4 246 /** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits
mbed_official 205:c41fc65bcfb4 247 * @{
mbed_official 205:c41fc65bcfb4 248 */
mbed_official 205:c41fc65bcfb4 249 #define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP))
mbed_official 205:c41fc65bcfb4 250 #define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
mbed_official 205:c41fc65bcfb4 251 /**
mbed_official 205:c41fc65bcfb4 252 * @}
mbed_official 205:c41fc65bcfb4 253 */
mbed_official 205:c41fc65bcfb4 254
mbed_official 205:c41fc65bcfb4 255 /** @defgroup SMARTCARD_Parity SMARTCARD Parity
mbed_official 205:c41fc65bcfb4 256 * @{
mbed_official 205:c41fc65bcfb4 257 */
mbed_official 205:c41fc65bcfb4 258 #define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
mbed_official 205:c41fc65bcfb4 259 #define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
mbed_official 205:c41fc65bcfb4 260 #define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
mbed_official 205:c41fc65bcfb4 261 ((PARITY) == SMARTCARD_PARITY_ODD))
mbed_official 205:c41fc65bcfb4 262 /**
mbed_official 205:c41fc65bcfb4 263 * @}
mbed_official 205:c41fc65bcfb4 264 */
mbed_official 205:c41fc65bcfb4 265
mbed_official 205:c41fc65bcfb4 266 /** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
mbed_official 205:c41fc65bcfb4 267 * @{
mbed_official 205:c41fc65bcfb4 268 */
mbed_official 205:c41fc65bcfb4 269 #define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE)
mbed_official 205:c41fc65bcfb4 270 #define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE)
mbed_official 205:c41fc65bcfb4 271 #define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
mbed_official 205:c41fc65bcfb4 272 #define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
mbed_official 205:c41fc65bcfb4 273 /**
mbed_official 205:c41fc65bcfb4 274 * @}
mbed_official 205:c41fc65bcfb4 275 */
mbed_official 205:c41fc65bcfb4 276
mbed_official 205:c41fc65bcfb4 277 /** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
mbed_official 205:c41fc65bcfb4 278 * @{
mbed_official 205:c41fc65bcfb4 279 */
mbed_official 205:c41fc65bcfb4 280 #define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000)
mbed_official 205:c41fc65bcfb4 281 #define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
mbed_official 205:c41fc65bcfb4 282 #define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
mbed_official 205:c41fc65bcfb4 283 /**
mbed_official 205:c41fc65bcfb4 284 * @}
mbed_official 205:c41fc65bcfb4 285 */
mbed_official 205:c41fc65bcfb4 286
mbed_official 205:c41fc65bcfb4 287 /** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
mbed_official 205:c41fc65bcfb4 288 * @{
mbed_official 205:c41fc65bcfb4 289 */
mbed_official 205:c41fc65bcfb4 290 #define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000)
mbed_official 205:c41fc65bcfb4 291 #define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
mbed_official 205:c41fc65bcfb4 292 #define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
mbed_official 205:c41fc65bcfb4 293 /**
mbed_official 205:c41fc65bcfb4 294 * @}
mbed_official 205:c41fc65bcfb4 295 */
mbed_official 205:c41fc65bcfb4 296
mbed_official 205:c41fc65bcfb4 297 /** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
mbed_official 205:c41fc65bcfb4 298 * @{
mbed_official 205:c41fc65bcfb4 299 */
mbed_official 205:c41fc65bcfb4 300 #define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000)
mbed_official 205:c41fc65bcfb4 301 #define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL)
mbed_official 205:c41fc65bcfb4 302 #define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
mbed_official 205:c41fc65bcfb4 303 ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
mbed_official 205:c41fc65bcfb4 304 /**
mbed_official 205:c41fc65bcfb4 305 * @}
mbed_official 205:c41fc65bcfb4 306 */
mbed_official 205:c41fc65bcfb4 307
mbed_official 205:c41fc65bcfb4 308 /** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
mbed_official 205:c41fc65bcfb4 309 * @{
mbed_official 205:c41fc65bcfb4 310 */
mbed_official 205:c41fc65bcfb4 311 #define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000)
mbed_official 205:c41fc65bcfb4 312 #define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT)
mbed_official 205:c41fc65bcfb4 313 #define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
mbed_official 205:c41fc65bcfb4 314 ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
mbed_official 205:c41fc65bcfb4 315 /**
mbed_official 205:c41fc65bcfb4 316 * @}
mbed_official 205:c41fc65bcfb4 317 */
mbed_official 205:c41fc65bcfb4 318
mbed_official 205:c41fc65bcfb4 319
mbed_official 205:c41fc65bcfb4 320 /** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
mbed_official 205:c41fc65bcfb4 321 * @{
mbed_official 205:c41fc65bcfb4 322 */
mbed_official 205:c41fc65bcfb4 323 #define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
mbed_official 205:c41fc65bcfb4 324 #define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000)
mbed_official 205:c41fc65bcfb4 325 #define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
mbed_official 205:c41fc65bcfb4 326 ((NACK) == SMARTCARD_NACK_DISABLED))
mbed_official 205:c41fc65bcfb4 327 /**
mbed_official 205:c41fc65bcfb4 328 * @}
mbed_official 205:c41fc65bcfb4 329 */
mbed_official 205:c41fc65bcfb4 330
mbed_official 205:c41fc65bcfb4 331 /** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
mbed_official 205:c41fc65bcfb4 332 * @{
mbed_official 205:c41fc65bcfb4 333 */
mbed_official 205:c41fc65bcfb4 334 #define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 335 #define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN)
mbed_official 205:c41fc65bcfb4 336 #define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
mbed_official 205:c41fc65bcfb4 337 ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
mbed_official 205:c41fc65bcfb4 338 /**
mbed_official 205:c41fc65bcfb4 339 * @}
mbed_official 205:c41fc65bcfb4 340 */
mbed_official 205:c41fc65bcfb4 341
mbed_official 205:c41fc65bcfb4 342 /** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
mbed_official 205:c41fc65bcfb4 343 * @{
mbed_official 205:c41fc65bcfb4 344 */
mbed_official 205:c41fc65bcfb4 345 #define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 346 #define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
mbed_official 205:c41fc65bcfb4 347 #define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
mbed_official 205:c41fc65bcfb4 348 #define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
mbed_official 205:c41fc65bcfb4 349 #define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
mbed_official 205:c41fc65bcfb4 350 #define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
mbed_official 205:c41fc65bcfb4 351 #define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
mbed_official 205:c41fc65bcfb4 352 #define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
mbed_official 205:c41fc65bcfb4 353 #define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
mbed_official 205:c41fc65bcfb4 354 SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
mbed_official 205:c41fc65bcfb4 355 SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
mbed_official 205:c41fc65bcfb4 356 SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
mbed_official 205:c41fc65bcfb4 357 SMARTCARD_ADVFEATURE_SWAP_INIT | \
mbed_official 205:c41fc65bcfb4 358 SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
mbed_official 205:c41fc65bcfb4 359 SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
mbed_official 205:c41fc65bcfb4 360 SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
mbed_official 205:c41fc65bcfb4 361 /**
mbed_official 205:c41fc65bcfb4 362 * @}
mbed_official 205:c41fc65bcfb4 363 */
mbed_official 205:c41fc65bcfb4 364
mbed_official 205:c41fc65bcfb4 365 /** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
mbed_official 205:c41fc65bcfb4 366 * @{
mbed_official 205:c41fc65bcfb4 367 */
mbed_official 205:c41fc65bcfb4 368 #define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 369 #define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
mbed_official 205:c41fc65bcfb4 370 #define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
mbed_official 205:c41fc65bcfb4 371 ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
mbed_official 205:c41fc65bcfb4 372 /**
mbed_official 205:c41fc65bcfb4 373 * @}
mbed_official 205:c41fc65bcfb4 374 */
mbed_official 205:c41fc65bcfb4 375
mbed_official 205:c41fc65bcfb4 376 /** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
mbed_official 205:c41fc65bcfb4 377 * @{
mbed_official 205:c41fc65bcfb4 378 */
mbed_official 205:c41fc65bcfb4 379 #define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 380 #define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
mbed_official 205:c41fc65bcfb4 381 #define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
mbed_official 205:c41fc65bcfb4 382 ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
mbed_official 205:c41fc65bcfb4 383 /**
mbed_official 205:c41fc65bcfb4 384 * @}
mbed_official 205:c41fc65bcfb4 385 */
mbed_official 205:c41fc65bcfb4 386
mbed_official 205:c41fc65bcfb4 387 /** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
mbed_official 205:c41fc65bcfb4 388 * @{
mbed_official 205:c41fc65bcfb4 389 */
mbed_official 205:c41fc65bcfb4 390 #define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 391 #define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
mbed_official 205:c41fc65bcfb4 392 #define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
mbed_official 205:c41fc65bcfb4 393 ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
mbed_official 205:c41fc65bcfb4 394 /**
mbed_official 205:c41fc65bcfb4 395 * @}
mbed_official 205:c41fc65bcfb4 396 */
mbed_official 205:c41fc65bcfb4 397
mbed_official 205:c41fc65bcfb4 398 /** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
mbed_official 205:c41fc65bcfb4 399 * @{
mbed_official 205:c41fc65bcfb4 400 */
mbed_official 205:c41fc65bcfb4 401 #define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 402 #define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
mbed_official 205:c41fc65bcfb4 403 #define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
mbed_official 205:c41fc65bcfb4 404 ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
mbed_official 205:c41fc65bcfb4 405 /**
mbed_official 205:c41fc65bcfb4 406 * @}
mbed_official 205:c41fc65bcfb4 407 */
mbed_official 205:c41fc65bcfb4 408
mbed_official 205:c41fc65bcfb4 409 /** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
mbed_official 205:c41fc65bcfb4 410 * @{
mbed_official 205:c41fc65bcfb4 411 */
mbed_official 205:c41fc65bcfb4 412 #define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 413 #define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
mbed_official 205:c41fc65bcfb4 414 #define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
mbed_official 205:c41fc65bcfb4 415 ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
mbed_official 205:c41fc65bcfb4 416 /**
mbed_official 205:c41fc65bcfb4 417 * @}
mbed_official 205:c41fc65bcfb4 418 */
mbed_official 205:c41fc65bcfb4 419
mbed_official 205:c41fc65bcfb4 420 /** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
mbed_official 205:c41fc65bcfb4 421 * @{
mbed_official 205:c41fc65bcfb4 422 */
mbed_official 205:c41fc65bcfb4 423 #define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 424 #define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
mbed_official 205:c41fc65bcfb4 425 #define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
mbed_official 205:c41fc65bcfb4 426 ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
mbed_official 205:c41fc65bcfb4 427 /**
mbed_official 205:c41fc65bcfb4 428 * @}
mbed_official 205:c41fc65bcfb4 429 */
mbed_official 205:c41fc65bcfb4 430
mbed_official 205:c41fc65bcfb4 431 /** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
mbed_official 205:c41fc65bcfb4 432 * @{
mbed_official 205:c41fc65bcfb4 433 */
mbed_official 205:c41fc65bcfb4 434 #define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
mbed_official 205:c41fc65bcfb4 435 #define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
mbed_official 205:c41fc65bcfb4 436 #define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
mbed_official 205:c41fc65bcfb4 437 ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
mbed_official 205:c41fc65bcfb4 438 /**
mbed_official 205:c41fc65bcfb4 439 * @}
mbed_official 205:c41fc65bcfb4 440 */
mbed_official 205:c41fc65bcfb4 441
mbed_official 205:c41fc65bcfb4 442 /** @defgroup SmartCard_Flags SMARTCARD Flags
mbed_official 205:c41fc65bcfb4 443 * Elements values convention: 0xXXXX
mbed_official 205:c41fc65bcfb4 444 * - 0xXXXX : Flag mask in the ISR register
mbed_official 205:c41fc65bcfb4 445 * @{
mbed_official 205:c41fc65bcfb4 446 */
mbed_official 205:c41fc65bcfb4 447 #define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000)
mbed_official 205:c41fc65bcfb4 448 #define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000)
mbed_official 205:c41fc65bcfb4 449 #define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000)
mbed_official 205:c41fc65bcfb4 450 #define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000)
mbed_official 205:c41fc65bcfb4 451 #define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800)
mbed_official 205:c41fc65bcfb4 452 #define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
mbed_official 205:c41fc65bcfb4 453 #define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
mbed_official 205:c41fc65bcfb4 454 #define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
mbed_official 205:c41fc65bcfb4 455 #define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
mbed_official 205:c41fc65bcfb4 456 #define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
mbed_official 205:c41fc65bcfb4 457 #define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
mbed_official 205:c41fc65bcfb4 458 #define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
mbed_official 205:c41fc65bcfb4 459 /**
mbed_official 205:c41fc65bcfb4 460 * @}
mbed_official 205:c41fc65bcfb4 461 */
mbed_official 205:c41fc65bcfb4 462
mbed_official 205:c41fc65bcfb4 463 /** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
mbed_official 205:c41fc65bcfb4 464 * Elements values convention: 0000ZZZZ0XXYYYYYb
mbed_official 205:c41fc65bcfb4 465 * - YYYYY : Interrupt source position in the XX register (5bits)
mbed_official 205:c41fc65bcfb4 466 * - XX : Interrupt source register (2bits)
mbed_official 205:c41fc65bcfb4 467 * - 01: CR1 register
mbed_official 205:c41fc65bcfb4 468 * - 10: CR2 register
mbed_official 205:c41fc65bcfb4 469 * - 11: CR3 register
mbed_official 205:c41fc65bcfb4 470 * - ZZZZ : Flag position in the ISR register(4bits)
mbed_official 205:c41fc65bcfb4 471 * @{
mbed_official 205:c41fc65bcfb4 472 */
mbed_official 205:c41fc65bcfb4 473
mbed_official 205:c41fc65bcfb4 474 #define SMARTCARD_IT_PE ((uint16_t)0x0028)
mbed_official 205:c41fc65bcfb4 475 #define SMARTCARD_IT_TXE ((uint16_t)0x0727)
mbed_official 205:c41fc65bcfb4 476 #define SMARTCARD_IT_TC ((uint16_t)0x0626)
mbed_official 205:c41fc65bcfb4 477 #define SMARTCARD_IT_RXNE ((uint16_t)0x0525)
mbed_official 205:c41fc65bcfb4 478
mbed_official 205:c41fc65bcfb4 479 #define SMARTCARD_IT_ERR ((uint16_t)0x0060)
mbed_official 205:c41fc65bcfb4 480 #define SMARTCARD_IT_ORE ((uint16_t)0x0300)
mbed_official 205:c41fc65bcfb4 481 #define SMARTCARD_IT_NE ((uint16_t)0x0200)
mbed_official 205:c41fc65bcfb4 482 #define SMARTCARD_IT_FE ((uint16_t)0x0100)
mbed_official 205:c41fc65bcfb4 483
mbed_official 205:c41fc65bcfb4 484 #define SMARTCARD_IT_EOB ((uint16_t)0x0C3B)
mbed_official 205:c41fc65bcfb4 485 #define SMARTCARD_IT_RTO ((uint16_t)0x0B3A)
mbed_official 205:c41fc65bcfb4 486 /**
mbed_official 205:c41fc65bcfb4 487 * @}
mbed_official 205:c41fc65bcfb4 488 */
mbed_official 205:c41fc65bcfb4 489
mbed_official 205:c41fc65bcfb4 490
mbed_official 205:c41fc65bcfb4 491 /** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
mbed_official 205:c41fc65bcfb4 492 * @{
mbed_official 205:c41fc65bcfb4 493 */
mbed_official 205:c41fc65bcfb4 494 #define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
mbed_official 205:c41fc65bcfb4 495 #define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
mbed_official 205:c41fc65bcfb4 496 #define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
mbed_official 205:c41fc65bcfb4 497 #define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
mbed_official 205:c41fc65bcfb4 498 #define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
mbed_official 205:c41fc65bcfb4 499 #define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
mbed_official 205:c41fc65bcfb4 500 #define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
mbed_official 205:c41fc65bcfb4 501 /**
mbed_official 205:c41fc65bcfb4 502 * @}
mbed_official 205:c41fc65bcfb4 503 */
mbed_official 205:c41fc65bcfb4 504
mbed_official 205:c41fc65bcfb4 505 /** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
mbed_official 205:c41fc65bcfb4 506 * @{
mbed_official 205:c41fc65bcfb4 507 */
mbed_official 205:c41fc65bcfb4 508 #define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
mbed_official 205:c41fc65bcfb4 509 #define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
mbed_official 205:c41fc65bcfb4 510 #define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
mbed_official 205:c41fc65bcfb4 511 ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))
mbed_official 205:c41fc65bcfb4 512 /**
mbed_official 205:c41fc65bcfb4 513 * @}
mbed_official 205:c41fc65bcfb4 514 */
mbed_official 205:c41fc65bcfb4 515
mbed_official 205:c41fc65bcfb4 516
mbed_official 205:c41fc65bcfb4 517 /** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
mbed_official 205:c41fc65bcfb4 518 * @{
mbed_official 205:c41fc65bcfb4 519 */
mbed_official 205:c41fc65bcfb4 520 #define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17)
mbed_official 205:c41fc65bcfb4 521 /**
mbed_official 205:c41fc65bcfb4 522 * @}
mbed_official 205:c41fc65bcfb4 523 */
mbed_official 205:c41fc65bcfb4 524
mbed_official 205:c41fc65bcfb4 525 /** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
mbed_official 205:c41fc65bcfb4 526 * @{
mbed_official 205:c41fc65bcfb4 527 */
mbed_official 205:c41fc65bcfb4 528 #define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8)
mbed_official 205:c41fc65bcfb4 529 /**
mbed_official 205:c41fc65bcfb4 530 * @}
mbed_official 205:c41fc65bcfb4 531 */
mbed_official 205:c41fc65bcfb4 532
mbed_official 205:c41fc65bcfb4 533 /** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
mbed_official 205:c41fc65bcfb4 534 * @{
mbed_official 205:c41fc65bcfb4 535 */
mbed_official 205:c41fc65bcfb4 536 #define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24)
mbed_official 205:c41fc65bcfb4 537 /**
mbed_official 205:c41fc65bcfb4 538 * @}
mbed_official 205:c41fc65bcfb4 539 */
mbed_official 205:c41fc65bcfb4 540
mbed_official 205:c41fc65bcfb4 541 /** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask
mbed_official 205:c41fc65bcfb4 542 * @{
mbed_official 205:c41fc65bcfb4 543 */
mbed_official 205:c41fc65bcfb4 544 #define SMARTCARD_IT_MASK ((uint16_t)0x001F)
mbed_official 205:c41fc65bcfb4 545 /**
mbed_official 205:c41fc65bcfb4 546 * @}
mbed_official 205:c41fc65bcfb4 547 */
mbed_official 205:c41fc65bcfb4 548
mbed_official 205:c41fc65bcfb4 549 /**
mbed_official 205:c41fc65bcfb4 550 * @}
mbed_official 205:c41fc65bcfb4 551 */
mbed_official 205:c41fc65bcfb4 552
mbed_official 205:c41fc65bcfb4 553 /* Exported macros -----------------------------------------------------------*/
mbed_official 205:c41fc65bcfb4 554 /** @defgroup SMARTCARD_Exported_Macros
mbed_official 205:c41fc65bcfb4 555 * @{
mbed_official 205:c41fc65bcfb4 556 */
mbed_official 205:c41fc65bcfb4 557
mbed_official 205:c41fc65bcfb4 558 /** @brief Reset SMARTCARD handle state
mbed_official 205:c41fc65bcfb4 559 * @param __HANDLE__: SMARTCARD handle.
mbed_official 205:c41fc65bcfb4 560 * @retval None
mbed_official 205:c41fc65bcfb4 561 */
mbed_official 205:c41fc65bcfb4 562 #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
mbed_official 205:c41fc65bcfb4 563
mbed_official 205:c41fc65bcfb4 564 /** @brief Checks whether the specified Smartcard flag is set or not.
mbed_official 205:c41fc65bcfb4 565 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 566 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 567 * @param __FLAG__: specifies the flag to check.
mbed_official 205:c41fc65bcfb4 568 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 569 * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
mbed_official 205:c41fc65bcfb4 570 * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
mbed_official 205:c41fc65bcfb4 571 * @arg SMARTCARD_FLAG_BUSY: Busy flag
mbed_official 205:c41fc65bcfb4 572 * @arg SMARTCARD_FLAG_EOBF: End of block flag
mbed_official 205:c41fc65bcfb4 573 * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
mbed_official 205:c41fc65bcfb4 574 * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
mbed_official 205:c41fc65bcfb4 575 * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
mbed_official 205:c41fc65bcfb4 576 * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
mbed_official 205:c41fc65bcfb4 577 * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
mbed_official 205:c41fc65bcfb4 578 * @arg SMARTCARD_FLAG_NE: Noise Error flag
mbed_official 205:c41fc65bcfb4 579 * @arg SMARTCARD_FLAG_FE: Framing Error flag
mbed_official 205:c41fc65bcfb4 580 * @arg SMARTCARD_FLAG_PE: Parity Error flag
mbed_official 205:c41fc65bcfb4 581 * @retval The new state of __FLAG__ (TRUE or FALSE).
mbed_official 205:c41fc65bcfb4 582 */
mbed_official 205:c41fc65bcfb4 583 #define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
mbed_official 205:c41fc65bcfb4 584
mbed_official 205:c41fc65bcfb4 585
mbed_official 205:c41fc65bcfb4 586 /** @brief Enables the specified SmartCard interrupt.
mbed_official 205:c41fc65bcfb4 587 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 588 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 589 * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
mbed_official 205:c41fc65bcfb4 590 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 591 * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
mbed_official 205:c41fc65bcfb4 592 * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
mbed_official 205:c41fc65bcfb4 593 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
mbed_official 205:c41fc65bcfb4 594 * @arg SMARTCARD_IT_TC: Transmission complete interrupt
mbed_official 205:c41fc65bcfb4 595 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
mbed_official 205:c41fc65bcfb4 596 * @arg SMARTCARD_IT_PE: Parity Error interrupt
mbed_official 205:c41fc65bcfb4 597 * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
mbed_official 205:c41fc65bcfb4 598 * @retval None
mbed_official 205:c41fc65bcfb4 599 */
mbed_official 205:c41fc65bcfb4 600 #define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
mbed_official 205:c41fc65bcfb4 601 ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
mbed_official 205:c41fc65bcfb4 602 ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
mbed_official 205:c41fc65bcfb4 603
mbed_official 205:c41fc65bcfb4 604 /** @brief Disables the specified SmartCard interrupt.
mbed_official 205:c41fc65bcfb4 605 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 606 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 607 * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
mbed_official 205:c41fc65bcfb4 608 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 609 * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
mbed_official 205:c41fc65bcfb4 610 * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
mbed_official 205:c41fc65bcfb4 611 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
mbed_official 205:c41fc65bcfb4 612 * @arg SMARTCARD_IT_TC: Transmission complete interrupt
mbed_official 205:c41fc65bcfb4 613 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
mbed_official 205:c41fc65bcfb4 614 * @arg SMARTCARD_IT_PE: Parity Error interrupt
mbed_official 205:c41fc65bcfb4 615 * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
mbed_official 205:c41fc65bcfb4 616 * @retval None
mbed_official 205:c41fc65bcfb4 617 */
mbed_official 205:c41fc65bcfb4 618 #define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
mbed_official 205:c41fc65bcfb4 619 ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
mbed_official 205:c41fc65bcfb4 620 ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
mbed_official 205:c41fc65bcfb4 621
mbed_official 205:c41fc65bcfb4 622
mbed_official 205:c41fc65bcfb4 623 /** @brief Checks whether the specified SmartCard interrupt has occurred or not.
mbed_official 205:c41fc65bcfb4 624 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 625 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 626 * @param __IT__: specifies the SMARTCARD interrupt to check.
mbed_official 205:c41fc65bcfb4 627 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 628 * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
mbed_official 205:c41fc65bcfb4 629 * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
mbed_official 205:c41fc65bcfb4 630 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
mbed_official 205:c41fc65bcfb4 631 * @arg SMARTCARD_IT_TC: Transmission complete interrupt
mbed_official 205:c41fc65bcfb4 632 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
mbed_official 205:c41fc65bcfb4 633 * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
mbed_official 205:c41fc65bcfb4 634 * @arg SMARTCARD_IT_NE: Noise Error interrupt
mbed_official 205:c41fc65bcfb4 635 * @arg SMARTCARD_IT_FE: Framing Error interrupt
mbed_official 205:c41fc65bcfb4 636 * @arg SMARTCARD_IT_PE: Parity Error interrupt
mbed_official 205:c41fc65bcfb4 637 * @retval The new state of __IT__ (TRUE or FALSE).
mbed_official 205:c41fc65bcfb4 638 */
mbed_official 205:c41fc65bcfb4 639 #define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
mbed_official 205:c41fc65bcfb4 640
mbed_official 205:c41fc65bcfb4 641 /** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled.
mbed_official 205:c41fc65bcfb4 642 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 643 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 644 * @param __IT__: specifies the SMARTCARD interrupt source to check.
mbed_official 205:c41fc65bcfb4 645 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 646 * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
mbed_official 205:c41fc65bcfb4 647 * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
mbed_official 205:c41fc65bcfb4 648 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
mbed_official 205:c41fc65bcfb4 649 * @arg SMARTCARD_IT_TC: Transmission complete interrupt
mbed_official 205:c41fc65bcfb4 650 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
mbed_official 205:c41fc65bcfb4 651 * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
mbed_official 205:c41fc65bcfb4 652 * @arg SMARTCARD_IT_NE: Noise Error interrupt
mbed_official 205:c41fc65bcfb4 653 * @arg SMARTCARD_IT_FE: Framing Error interrupt
mbed_official 205:c41fc65bcfb4 654 * @arg SMARTCARD_IT_PE: Parity Error interrupt
mbed_official 205:c41fc65bcfb4 655 * @retval The new state of __IT__ (TRUE or FALSE).
mbed_official 205:c41fc65bcfb4 656 */
mbed_official 205:c41fc65bcfb4 657 #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
mbed_official 205:c41fc65bcfb4 658 (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
mbed_official 205:c41fc65bcfb4 659 (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
mbed_official 205:c41fc65bcfb4 660
mbed_official 205:c41fc65bcfb4 661
mbed_official 205:c41fc65bcfb4 662 /** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
mbed_official 205:c41fc65bcfb4 663 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 664 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 665 * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
mbed_official 205:c41fc65bcfb4 666 * to clear the corresponding interrupt
mbed_official 205:c41fc65bcfb4 667 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 668 * @arg USART_CLEAR_PEF: Parity Error Clear Flag
mbed_official 205:c41fc65bcfb4 669 * @arg USART_CLEAR_FEF: Framing Error Clear Flag
mbed_official 205:c41fc65bcfb4 670 * @arg USART_CLEAR_NEF: Noise detected Clear Flag
mbed_official 205:c41fc65bcfb4 671 * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
mbed_official 205:c41fc65bcfb4 672 * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
mbed_official 205:c41fc65bcfb4 673 * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
mbed_official 205:c41fc65bcfb4 674 * @arg USART_CLEAR_EOBF: End Of Block Clear Flag
mbed_official 205:c41fc65bcfb4 675 * @retval None
mbed_official 205:c41fc65bcfb4 676 */
mbed_official 205:c41fc65bcfb4 677 #define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
mbed_official 205:c41fc65bcfb4 678
mbed_official 205:c41fc65bcfb4 679 /** @brief Set a specific SMARTCARD request flag.
mbed_official 205:c41fc65bcfb4 680 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 681 * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
mbed_official 205:c41fc65bcfb4 682 * @param __REQ__: specifies the request flag to set
mbed_official 205:c41fc65bcfb4 683 * This parameter can be one of the following values:
mbed_official 205:c41fc65bcfb4 684 * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request
mbed_official 205:c41fc65bcfb4 685 * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
mbed_official 205:c41fc65bcfb4 686 *
mbed_official 205:c41fc65bcfb4 687 * @retval None
mbed_official 205:c41fc65bcfb4 688 */
mbed_official 205:c41fc65bcfb4 689 #define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
mbed_official 205:c41fc65bcfb4 690
mbed_official 205:c41fc65bcfb4 691 /** @brief Enable the USART associated to the SMARTCARD Handle
mbed_official 205:c41fc65bcfb4 692 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 693 * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
mbed_official 205:c41fc65bcfb4 694 * @retval None
mbed_official 205:c41fc65bcfb4 695 */
mbed_official 205:c41fc65bcfb4 696 #define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
mbed_official 205:c41fc65bcfb4 697
mbed_official 205:c41fc65bcfb4 698 /** @brief Disable the USART associated to the SMARTCARD Handle
mbed_official 205:c41fc65bcfb4 699 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 205:c41fc65bcfb4 700 * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
mbed_official 205:c41fc65bcfb4 701 * @retval None
mbed_official 205:c41fc65bcfb4 702 */
mbed_official 205:c41fc65bcfb4 703 #define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
mbed_official 205:c41fc65bcfb4 704
mbed_official 205:c41fc65bcfb4 705 /** @brief Check the Baud rate range. The maximum Baud Rate is derived from the
mbed_official 205:c41fc65bcfb4 706 * maximum clock on F0 (i.e. 48 MHz) divided by the oversampling used
mbed_official 205:c41fc65bcfb4 707 * on the SMARTCARD (i.e. 16)
mbed_official 205:c41fc65bcfb4 708 * @param __BAUDRATE__: Baud rate set by the configuration function.
mbed_official 205:c41fc65bcfb4 709 * @retval Test result (TRUE or FALSE)
mbed_official 205:c41fc65bcfb4 710 */
mbed_official 205:c41fc65bcfb4 711 #define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
mbed_official 205:c41fc65bcfb4 712
mbed_official 205:c41fc65bcfb4 713 /** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF.
mbed_official 205:c41fc65bcfb4 714 * @param __LENGTH__: block length.
mbed_official 205:c41fc65bcfb4 715 * @retval Test result (TRUE or FALSE)
mbed_official 205:c41fc65bcfb4 716 */
mbed_official 205:c41fc65bcfb4 717 #define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
mbed_official 205:c41fc65bcfb4 718
mbed_official 205:c41fc65bcfb4 719 /** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout
mbed_official 205:c41fc65bcfb4 720 * value is 0xFFFFFF.
mbed_official 205:c41fc65bcfb4 721 * @param __TIMEOUTVALUE__: receiver timeout value.
mbed_official 205:c41fc65bcfb4 722 * @retval Test result (TRUE or FALSE)
mbed_official 205:c41fc65bcfb4 723 */
mbed_official 205:c41fc65bcfb4 724 #define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF)
mbed_official 205:c41fc65bcfb4 725
mbed_official 205:c41fc65bcfb4 726 /** @brief Check the SMARTCARD autoretry counter value. The maximum number of
mbed_official 205:c41fc65bcfb4 727 * retransmissions is 0x7.
mbed_official 205:c41fc65bcfb4 728 * @param __COUNT__: number of retransmissions
mbed_official 205:c41fc65bcfb4 729 * @retval Test result (TRUE or FALSE)
mbed_official 205:c41fc65bcfb4 730 */
mbed_official 205:c41fc65bcfb4 731 #define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7)
mbed_official 205:c41fc65bcfb4 732
mbed_official 205:c41fc65bcfb4 733 /**
mbed_official 205:c41fc65bcfb4 734 * @}
mbed_official 205:c41fc65bcfb4 735 */
mbed_official 205:c41fc65bcfb4 736
mbed_official 205:c41fc65bcfb4 737 /* Include SMARTCARD HAL Extension module */
mbed_official 205:c41fc65bcfb4 738 #include "stm32f0xx_hal_smartcard_ex.h"
mbed_official 205:c41fc65bcfb4 739
mbed_official 205:c41fc65bcfb4 740
mbed_official 205:c41fc65bcfb4 741 /* Exported functions --------------------------------------------------------*/
mbed_official 205:c41fc65bcfb4 742 /* Initialization and de-initialization functions ****************************/
mbed_official 205:c41fc65bcfb4 743 HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 744 HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 745 void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 746 void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 747
mbed_official 205:c41fc65bcfb4 748
mbed_official 205:c41fc65bcfb4 749 /* IO operation functions *****************************************************/
mbed_official 205:c41fc65bcfb4 750 HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
mbed_official 205:c41fc65bcfb4 751 HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
mbed_official 205:c41fc65bcfb4 752 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
mbed_official 205:c41fc65bcfb4 753 HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
mbed_official 205:c41fc65bcfb4 754 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
mbed_official 205:c41fc65bcfb4 755 HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
mbed_official 205:c41fc65bcfb4 756 void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 757 void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 758 void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 759 void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 760
mbed_official 205:c41fc65bcfb4 761 /* Peripheral Control functions ***********************************************/
mbed_official 205:c41fc65bcfb4 762 void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 763
mbed_official 205:c41fc65bcfb4 764 /* Peripheral State and Error functions ***************************************/
mbed_official 205:c41fc65bcfb4 765 HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 766 uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
mbed_official 205:c41fc65bcfb4 767 /**
mbed_official 205:c41fc65bcfb4 768 * @}
mbed_official 205:c41fc65bcfb4 769 */
mbed_official 205:c41fc65bcfb4 770
mbed_official 205:c41fc65bcfb4 771 /**
mbed_official 205:c41fc65bcfb4 772 * @}
mbed_official 205:c41fc65bcfb4 773 */
mbed_official 205:c41fc65bcfb4 774
mbed_official 205:c41fc65bcfb4 775 #endif /* !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8) */
mbed_official 205:c41fc65bcfb4 776
mbed_official 205:c41fc65bcfb4 777 #ifdef __cplusplus
mbed_official 205:c41fc65bcfb4 778 }
mbed_official 205:c41fc65bcfb4 779 #endif
mbed_official 205:c41fc65bcfb4 780
mbed_official 205:c41fc65bcfb4 781 #endif /* __STM32F0xx_HAL_SMARTCARD_H */
mbed_official 205:c41fc65bcfb4 782
mbed_official 205:c41fc65bcfb4 783 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/