shao ziyang / mbed-src-kl05

mbed library sources

Dependents:   frdm_kl05z_gpio_test

Fork of mbed-src by mbed official

targets/hal/TARGET_STM/TARGET_DISCO_F100RB/pinmap.c@142:7f2b6c44bbe3, 2014-04-01 (annotated)

Committer:
mbed_official
Date:
Tue Apr 01 17:00:08 2014 +0100
Revision:
142:7f2b6c44bbe3
Parent:
126:549ba18ddd81
Child:
227:7bd0639b8911
Synchronized with git revision 0617b11a5c56e3beae0eac17cf1129be8329c906



Full URL: https://github.com/mbedmicro/mbed/commit/0617b11a5c56e3beae0eac17cf1129be8329c906/



[GCC_ARM][DISCO]: Modified compilatin error and silent warning.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mbed_official 126:549ba18ddd81 1 /* mbed Microcontroller Library
mbed_official 126:549ba18ddd81 2 *******************************************************************************
mbed_official 126:549ba18ddd81 3 * Copyright (c) 2014, STMicroelectronics
mbed_official 126:549ba18ddd81 4 * All rights reserved.
mbed_official 126:549ba18ddd81 5 *
mbed_official 126:549ba18ddd81 6 * Redistribution and use in source and binary forms, with or without
mbed_official 126:549ba18ddd81 7 * modification, are permitted provided that the following conditions are met:
mbed_official 126:549ba18ddd81 8 *
mbed_official 126:549ba18ddd81 9 * 1. Redistributions of source code must retain the above copyright notice,
mbed_official 126:549ba18ddd81 10 * this list of conditions and the following disclaimer.
mbed_official 126:549ba18ddd81 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
mbed_official 126:549ba18ddd81 12 * this list of conditions and the following disclaimer in the documentation
mbed_official 126:549ba18ddd81 13 * and/or other materials provided with the distribution.
mbed_official 126:549ba18ddd81 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
mbed_official 126:549ba18ddd81 15 * may be used to endorse or promote products derived from this software
mbed_official 126:549ba18ddd81 16 * without specific prior written permission.
mbed_official 126:549ba18ddd81 17 *
mbed_official 126:549ba18ddd81 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
mbed_official 126:549ba18ddd81 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
mbed_official 126:549ba18ddd81 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
mbed_official 126:549ba18ddd81 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
mbed_official 126:549ba18ddd81 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
mbed_official 126:549ba18ddd81 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
mbed_official 126:549ba18ddd81 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
mbed_official 126:549ba18ddd81 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
mbed_official 126:549ba18ddd81 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
mbed_official 126:549ba18ddd81 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
mbed_official 126:549ba18ddd81 28 *******************************************************************************
mbed_official 126:549ba18ddd81 29 */
mbed_official 142:7f2b6c44bbe3 30 #include "device.h"
mbed_official 126:549ba18ddd81 31 #include "pinmap.h"
mbed_official 126:549ba18ddd81 32 #include "error.h"
mbed_official 126:549ba18ddd81 33
mbed_official 126:549ba18ddd81 34 // Alternate-function mapping
mbed_official 126:549ba18ddd81 35 static const uint32_t AF_mapping[] = {
mbed_official 126:549ba18ddd81 36 0, // 0 = No AF
mbed_official 126:549ba18ddd81 37 GPIO_Remap_SPI1, // 1
mbed_official 126:549ba18ddd81 38 GPIO_Remap_I2C1, // 2
mbed_official 126:549ba18ddd81 39 GPIO_Remap_USART1, // 3
mbed_official 126:549ba18ddd81 40 GPIO_Remap_USART2, // 4
mbed_official 126:549ba18ddd81 41 GPIO_FullRemap_TIM2, // 5
mbed_official 126:549ba18ddd81 42 GPIO_FullRemap_TIM3, // 6
mbed_official 126:549ba18ddd81 43 GPIO_PartialRemap_TIM3, // 7
mbed_official 126:549ba18ddd81 44 GPIO_Remap_I2C1 // 8
mbed_official 126:549ba18ddd81 45 };
mbed_official 126:549ba18ddd81 46
mbed_official 126:549ba18ddd81 47 // Enable GPIO clock and return GPIO base address
mbed_official 126:549ba18ddd81 48 uint32_t Set_GPIO_Clock(uint32_t port_idx) {
mbed_official 126:549ba18ddd81 49 uint32_t gpio_add = 0;
mbed_official 126:549ba18ddd81 50 switch (port_idx) {
mbed_official 126:549ba18ddd81 51 case PortA:
mbed_official 126:549ba18ddd81 52 gpio_add = GPIOA_BASE;
mbed_official 126:549ba18ddd81 53 RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
mbed_official 126:549ba18ddd81 54 break;
mbed_official 126:549ba18ddd81 55 case PortB:
mbed_official 126:549ba18ddd81 56 gpio_add = GPIOB_BASE;
mbed_official 126:549ba18ddd81 57 RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
mbed_official 126:549ba18ddd81 58 break;
mbed_official 126:549ba18ddd81 59 case PortC:
mbed_official 126:549ba18ddd81 60 gpio_add = GPIOC_BASE;
mbed_official 126:549ba18ddd81 61 RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
mbed_official 126:549ba18ddd81 62 break;
mbed_official 126:549ba18ddd81 63 case PortD:
mbed_official 126:549ba18ddd81 64 gpio_add = GPIOD_BASE;
mbed_official 126:549ba18ddd81 65 RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE);
mbed_official 126:549ba18ddd81 66 break;
mbed_official 126:549ba18ddd81 67 default:
mbed_official 126:549ba18ddd81 68 error("Port number is not correct.");
mbed_official 126:549ba18ddd81 69 break;
mbed_official 126:549ba18ddd81 70 }
mbed_official 126:549ba18ddd81 71 return gpio_add;
mbed_official 126:549ba18ddd81 72 }
mbed_official 126:549ba18ddd81 73
mbed_official 126:549ba18ddd81 74 /**
mbed_official 126:549ba18ddd81 75 * Configure pin (input, output, alternate function or analog) + output speed + AF
mbed_official 126:549ba18ddd81 76 */
mbed_official 126:549ba18ddd81 77 void pin_function(PinName pin, int data) {
mbed_official 126:549ba18ddd81 78 if (pin == NC) return;
mbed_official 126:549ba18ddd81 79
mbed_official 126:549ba18ddd81 80 // Get the pin informations
mbed_official 126:549ba18ddd81 81 uint32_t mode = STM_PIN_MODE(data);
mbed_official 126:549ba18ddd81 82 uint32_t afnum = STM_PIN_AFNUM(data);
mbed_official 126:549ba18ddd81 83
mbed_official 126:549ba18ddd81 84 uint32_t port_index = STM_PORT(pin);
mbed_official 126:549ba18ddd81 85 uint32_t pin_index = STM_PIN(pin);
mbed_official 126:549ba18ddd81 86
mbed_official 126:549ba18ddd81 87 // Enable GPIO clock
mbed_official 126:549ba18ddd81 88 uint32_t gpio_add = Set_GPIO_Clock(port_index);
mbed_official 126:549ba18ddd81 89 GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
mbed_official 126:549ba18ddd81 90
mbed_official 126:549ba18ddd81 91 // Enable AFIO clock
mbed_official 126:549ba18ddd81 92 RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
mbed_official 126:549ba18ddd81 93
mbed_official 126:549ba18ddd81 94 // Configure Alternate Function
mbed_official 126:549ba18ddd81 95 // Warning: Must be done before the GPIO is initialized
mbed_official 126:549ba18ddd81 96 if (afnum > 0) {
mbed_official 126:549ba18ddd81 97 GPIO_PinRemapConfig(AF_mapping[afnum], ENABLE);
mbed_official 126:549ba18ddd81 98 }
mbed_official 126:549ba18ddd81 99
mbed_official 126:549ba18ddd81 100 // Configure GPIO
mbed_official 126:549ba18ddd81 101 GPIO_InitTypeDef GPIO_InitStructure;
mbed_official 126:549ba18ddd81 102 GPIO_InitStructure.GPIO_Pin = (uint16_t)(1 << pin_index);
mbed_official 126:549ba18ddd81 103 GPIO_InitStructure.GPIO_Mode = (GPIOMode_TypeDef)mode;
mbed_official 126:549ba18ddd81 104 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
mbed_official 126:549ba18ddd81 105 GPIO_Init(gpio, &GPIO_InitStructure);
mbed_official 126:549ba18ddd81 106
mbed_official 126:549ba18ddd81 107 // Disconnect JTAG-DP + SW-DP signals.
mbed_official 126:549ba18ddd81 108 // Warning: Need to reconnect under reset
mbed_official 126:549ba18ddd81 109 if ((pin == PA_13) || (pin == PA_14)) {
mbed_official 126:549ba18ddd81 110 GPIO_PinRemapConfig(GPIO_Remap_SWJ_Disable, ENABLE);
mbed_official 126:549ba18ddd81 111 }
mbed_official 126:549ba18ddd81 112 if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
mbed_official 126:549ba18ddd81 113 GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
mbed_official 126:549ba18ddd81 114 }
mbed_official 126:549ba18ddd81 115 }
mbed_official 126:549ba18ddd81 116
mbed_official 126:549ba18ddd81 117 /**
mbed_official 126:549ba18ddd81 118 * Configure pin pull-up/pull-down
mbed_official 126:549ba18ddd81 119 */
mbed_official 126:549ba18ddd81 120 void pin_mode(PinName pin, PinMode mode) {
mbed_official 126:549ba18ddd81 121 GPIO_InitTypeDef GPIO_InitStructure;
mbed_official 126:549ba18ddd81 122
mbed_official 126:549ba18ddd81 123 if (pin == NC) return;
mbed_official 126:549ba18ddd81 124
mbed_official 126:549ba18ddd81 125 uint32_t port_index = STM_PORT(pin);
mbed_official 126:549ba18ddd81 126 uint32_t pin_index = STM_PIN(pin);
mbed_official 126:549ba18ddd81 127
mbed_official 126:549ba18ddd81 128 // Enable GPIO clock
mbed_official 126:549ba18ddd81 129 uint32_t gpio_add = Set_GPIO_Clock(port_index);
mbed_official 126:549ba18ddd81 130 GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
mbed_official 126:549ba18ddd81 131
mbed_official 126:549ba18ddd81 132 // Configure open-drain and pull-up/down
mbed_official 126:549ba18ddd81 133 switch (mode) {
mbed_official 126:549ba18ddd81 134 case PullNone:
mbed_official 126:549ba18ddd81 135 return;
mbed_official 126:549ba18ddd81 136 case PullUp:
mbed_official 126:549ba18ddd81 137 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
mbed_official 126:549ba18ddd81 138 break;
mbed_official 126:549ba18ddd81 139 case PullDown:
mbed_official 126:549ba18ddd81 140 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
mbed_official 126:549ba18ddd81 141 break;
mbed_official 126:549ba18ddd81 142 case OpenDrain:
mbed_official 126:549ba18ddd81 143 if (pin_index < 8) {
mbed_official 126:549ba18ddd81 144 if ((gpio->CRL & (0x03 << (pin_index * 4))) > 0) { // MODE bits = Output mode
mbed_official 126:549ba18ddd81 145 gpio->CRL |= (0x04 << (pin_index * 4)); // Set open-drain
mbed_official 126:549ba18ddd81 146 }
mbed_official 126:549ba18ddd81 147 }
mbed_official 126:549ba18ddd81 148 else {
mbed_official 126:549ba18ddd81 149 if ((gpio->CRH & (0x03 << ((pin_index % 8) * 4))) > 0) { // MODE bits = Output mode
mbed_official 126:549ba18ddd81 150 gpio->CRH |= (0x04 << ((pin_index % 8) * 4)); // Set open-drain
mbed_official 126:549ba18ddd81 151 }
mbed_official 126:549ba18ddd81 152 }
mbed_official 126:549ba18ddd81 153 return;
mbed_official 126:549ba18ddd81 154 default:
mbed_official 126:549ba18ddd81 155 break;
mbed_official 126:549ba18ddd81 156 }
mbed_official 126:549ba18ddd81 157
mbed_official 126:549ba18ddd81 158 // Configure GPIO
mbed_official 126:549ba18ddd81 159 GPIO_InitStructure.GPIO_Pin = (uint16_t)(1 << pin_index);
mbed_official 126:549ba18ddd81 160 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
mbed_official 126:549ba18ddd81 161 GPIO_Init(gpio, &GPIO_InitStructure);
mbed_official 126:549ba18ddd81 162 }