mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/pwmout_api.c@300:55638feb26a4, 2014-08-27 (annotated)
- Committer:
- mbed_official
- Date:
- Wed Aug 27 08:45:06 2014 +0100
- Revision:
- 300:55638feb26a4
- Parent:
- 285:31249416b6f9
Synchronized with git revision 90467175c04ad81c20cdf7b2ddb86c54f5f3dcbb
Full URL: https://github.com/mbedmicro/mbed/commit/90467175c04ad81c20cdf7b2ddb86c54f5f3dcbb/
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 85:e1a8e879a6a9 | 1 | /* mbed Microcontroller Library |
mbed_official | 104:a6a92e2e5a92 | 2 | * Copyright (c) 2013 Nordic Semiconductor |
mbed_official | 85:e1a8e879a6a9 | 3 | * |
mbed_official | 85:e1a8e879a6a9 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
mbed_official | 85:e1a8e879a6a9 | 5 | * you may not use this file except in compliance with the License. |
mbed_official | 85:e1a8e879a6a9 | 6 | * You may obtain a copy of the License at |
mbed_official | 85:e1a8e879a6a9 | 7 | * |
mbed_official | 85:e1a8e879a6a9 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
mbed_official | 85:e1a8e879a6a9 | 9 | * |
mbed_official | 85:e1a8e879a6a9 | 10 | * Unless required by applicable law or agreed to in writing, software |
mbed_official | 85:e1a8e879a6a9 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
mbed_official | 85:e1a8e879a6a9 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
mbed_official | 85:e1a8e879a6a9 | 13 | * See the License for the specific language governing permissions and |
mbed_official | 85:e1a8e879a6a9 | 14 | * limitations under the License. |
mbed_official | 85:e1a8e879a6a9 | 15 | */ |
mbed_official | 227:7bd0639b8911 | 16 | #include "mbed_assert.h" |
mbed_official | 85:e1a8e879a6a9 | 17 | #include "pwmout_api.h" |
mbed_official | 85:e1a8e879a6a9 | 18 | #include "cmsis.h" |
mbed_official | 85:e1a8e879a6a9 | 19 | #include "pinmap.h" |
mbed_official | 285:31249416b6f9 | 20 | #include "mbed_error.h" |
mbed_official | 85:e1a8e879a6a9 | 21 | |
mbed_official | 229:9bd26d142f33 | 22 | #define NO_PWMS 3 |
mbed_official | 300:55638feb26a4 | 23 | #define TIMER_PRECISION 4 //4us ticks |
mbed_official | 229:9bd26d142f33 | 24 | #define TIMER_PRESCALER 6 //4us ticks = 16Mhz/(2**6) |
mbed_official | 85:e1a8e879a6a9 | 25 | static const PinMap PinMap_PWM[] = { |
mbed_official | 85:e1a8e879a6a9 | 26 | {p0, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 27 | {p1, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 28 | {p2, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 29 | {p3, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 30 | {p4, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 31 | {p5, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 32 | {p6, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 33 | {p7, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 34 | {p8, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 35 | {p9, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 36 | {p10, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 37 | {p11, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 38 | {p12, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 39 | {p13, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 40 | {p14, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 41 | {p15, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 42 | {p16, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 43 | {p17, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 44 | {p18, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 45 | {p19, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 46 | {p20, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 47 | {p21, PWM_1, 1}, |
mbed_official | 227:7bd0639b8911 | 48 | {p22, PWM_1, 1}, |
mbed_official | 227:7bd0639b8911 | 49 | {p23, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 50 | {p24, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 51 | {p25, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 52 | {p28, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 53 | {p29, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 54 | {p30, PWM_1, 1}, |
mbed_official | 85:e1a8e879a6a9 | 55 | {NC, NC, 0} |
mbed_official | 85:e1a8e879a6a9 | 56 | }; |
mbed_official | 85:e1a8e879a6a9 | 57 | |
mbed_official | 85:e1a8e879a6a9 | 58 | static NRF_TIMER_Type *Timers[1] = { |
mbed_official | 227:7bd0639b8911 | 59 | NRF_TIMER2 |
mbed_official | 85:e1a8e879a6a9 | 60 | }; |
mbed_official | 85:e1a8e879a6a9 | 61 | |
mbed_official | 300:55638feb26a4 | 62 | uint16_t PERIOD = 20000 / TIMER_PRECISION; //20ms |
mbed_official | 300:55638feb26a4 | 63 | uint8_t PWM_taken[NO_PWMS] = {0, 0, 0}; |
mbed_official | 300:55638feb26a4 | 64 | uint16_t PULSE_WIDTH[NO_PWMS] = {1, 1, 1}; //set to 1 instead of 0 |
mbed_official | 300:55638feb26a4 | 65 | uint16_t ACTUAL_PULSE[NO_PWMS] = {0, 0, 0}; |
mbed_official | 85:e1a8e879a6a9 | 66 | |
mbed_official | 85:e1a8e879a6a9 | 67 | |
mbed_official | 85:e1a8e879a6a9 | 68 | /** @brief Function for handling timer 2 peripheral interrupts. |
mbed_official | 85:e1a8e879a6a9 | 69 | */ |
mbed_official | 300:55638feb26a4 | 70 | #ifdef __cplusplus |
mbed_official | 85:e1a8e879a6a9 | 71 | extern "C" { |
mbed_official | 300:55638feb26a4 | 72 | #endif |
mbed_official | 85:e1a8e879a6a9 | 73 | void TIMER2_IRQHandler(void) |
mbed_official | 85:e1a8e879a6a9 | 74 | { |
mbed_official | 229:9bd26d142f33 | 75 | NRF_TIMER2->EVENTS_COMPARE[3] = 0; |
mbed_official | 300:55638feb26a4 | 76 | NRF_TIMER2->CC[3] = PERIOD; |
mbed_official | 300:55638feb26a4 | 77 | |
mbed_official | 300:55638feb26a4 | 78 | if (PWM_taken[0]) { |
mbed_official | 300:55638feb26a4 | 79 | NRF_TIMER2->CC[0] = PULSE_WIDTH[0]; |
mbed_official | 229:9bd26d142f33 | 80 | } |
mbed_official | 300:55638feb26a4 | 81 | if (PWM_taken[1]) { |
mbed_official | 300:55638feb26a4 | 82 | NRF_TIMER2->CC[1] = PULSE_WIDTH[1]; |
mbed_official | 229:9bd26d142f33 | 83 | } |
mbed_official | 300:55638feb26a4 | 84 | if (PWM_taken[2]) { |
mbed_official | 300:55638feb26a4 | 85 | NRF_TIMER2->CC[2] = PULSE_WIDTH[2]; |
mbed_official | 229:9bd26d142f33 | 86 | } |
mbed_official | 300:55638feb26a4 | 87 | |
mbed_official | 229:9bd26d142f33 | 88 | NRF_TIMER2->TASKS_START = 1; |
mbed_official | 300:55638feb26a4 | 89 | } |
mbed_official | 85:e1a8e879a6a9 | 90 | |
mbed_official | 85:e1a8e879a6a9 | 91 | #ifdef __cplusplus |
mbed_official | 85:e1a8e879a6a9 | 92 | } |
mbed_official | 300:55638feb26a4 | 93 | #endif |
mbed_official | 85:e1a8e879a6a9 | 94 | /** @brief Function for initializing the Timer peripherals. |
mbed_official | 85:e1a8e879a6a9 | 95 | */ |
mbed_official | 85:e1a8e879a6a9 | 96 | void timer_init(uint8_t pwmChoice) |
mbed_official | 85:e1a8e879a6a9 | 97 | { |
mbed_official | 229:9bd26d142f33 | 98 | NRF_TIMER_Type *timer = Timers[0]; |
mbed_official | 229:9bd26d142f33 | 99 | timer->TASKS_STOP = 0; |
mbed_official | 300:55638feb26a4 | 100 | |
mbed_official | 300:55638feb26a4 | 101 | if (pwmChoice == 0) { |
mbed_official | 85:e1a8e879a6a9 | 102 | timer->POWER = 0; |
mbed_official | 300:55638feb26a4 | 103 | timer->POWER = 1; |
mbed_official | 300:55638feb26a4 | 104 | timer->MODE = TIMER_MODE_MODE_Timer; |
mbed_official | 85:e1a8e879a6a9 | 105 | timer->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos; |
mbed_official | 300:55638feb26a4 | 106 | timer->PRESCALER = TIMER_PRESCALER; |
mbed_official | 229:9bd26d142f33 | 107 | timer->CC[3] = PERIOD; |
mbed_official | 85:e1a8e879a6a9 | 108 | } |
mbed_official | 300:55638feb26a4 | 109 | |
mbed_official | 229:9bd26d142f33 | 110 | timer->CC[pwmChoice] = PULSE_WIDTH[pwmChoice]; |
mbed_official | 300:55638feb26a4 | 111 | |
mbed_official | 85:e1a8e879a6a9 | 112 | //high priority application interrupt |
mbed_official | 85:e1a8e879a6a9 | 113 | NVIC_SetPriority(TIMER2_IRQn, 1); |
mbed_official | 85:e1a8e879a6a9 | 114 | NVIC_EnableIRQ(TIMER2_IRQn); |
mbed_official | 300:55638feb26a4 | 115 | |
mbed_official | 85:e1a8e879a6a9 | 116 | timer->TASKS_START = 0x01; |
mbed_official | 85:e1a8e879a6a9 | 117 | } |
mbed_official | 300:55638feb26a4 | 118 | |
mbed_official | 85:e1a8e879a6a9 | 119 | /** @brief Function for initializing the GPIO Tasks/Events peripheral. |
mbed_official | 85:e1a8e879a6a9 | 120 | */ |
mbed_official | 300:55638feb26a4 | 121 | void gpiote_init(PinName pin, uint8_t channel_number) |
mbed_official | 85:e1a8e879a6a9 | 122 | { |
mbed_official | 85:e1a8e879a6a9 | 123 | // Connect GPIO input buffers and configure PWM_OUTPUT_PIN_NUMBER as an output. |
mbed_official | 85:e1a8e879a6a9 | 124 | NRF_GPIO->PIN_CNF[pin] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
mbed_official | 85:e1a8e879a6a9 | 125 | | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
mbed_official | 85:e1a8e879a6a9 | 126 | | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
mbed_official | 85:e1a8e879a6a9 | 127 | | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) |
mbed_official | 85:e1a8e879a6a9 | 128 | | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos); |
mbed_official | 85:e1a8e879a6a9 | 129 | NRF_GPIO->OUTCLR = (1UL << pin); |
mbed_official | 85:e1a8e879a6a9 | 130 | // Configure GPIOTE channel 0 to toggle the PWM pin state |
mbed_official | 85:e1a8e879a6a9 | 131 | // @note Only one GPIOTE task can be connected to an output pin. |
mbed_official | 85:e1a8e879a6a9 | 132 | /* Configure channel to Pin31, not connected to the pin, and configure as a tasks that will set it to proper level */ |
mbed_official | 300:55638feb26a4 | 133 | NRF_GPIOTE->CONFIG[channel_number] = (GPIOTE_CONFIG_MODE_Task << GPIOTE_CONFIG_MODE_Pos) | |
mbed_official | 300:55638feb26a4 | 134 | (31UL << GPIOTE_CONFIG_PSEL_Pos) | |
mbed_official | 85:e1a8e879a6a9 | 135 | (GPIOTE_CONFIG_POLARITY_HiToLo << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 300:55638feb26a4 | 136 | /* Three NOPs are required to make sure configuration is written before setting tasks or getting events */ |
mbed_official | 300:55638feb26a4 | 137 | __NOP(); |
mbed_official | 85:e1a8e879a6a9 | 138 | __NOP(); |
mbed_official | 85:e1a8e879a6a9 | 139 | __NOP(); |
mbed_official | 85:e1a8e879a6a9 | 140 | /* Launch the task to take the GPIOTE channel output to the desired level */ |
mbed_official | 85:e1a8e879a6a9 | 141 | NRF_GPIOTE->TASKS_OUT[channel_number] = 1; |
mbed_official | 300:55638feb26a4 | 142 | |
mbed_official | 300:55638feb26a4 | 143 | /* Finally configure the channel as the caller expects. If OUTINIT works, the channel is configured properly. |
mbed_official | 85:e1a8e879a6a9 | 144 | If it does not, the channel output inheritance sets the proper level. */ |
mbed_official | 300:55638feb26a4 | 145 | NRF_GPIOTE->CONFIG[channel_number] = (GPIOTE_CONFIG_MODE_Task << GPIOTE_CONFIG_MODE_Pos) | |
mbed_official | 300:55638feb26a4 | 146 | ((uint32_t)pin << GPIOTE_CONFIG_PSEL_Pos) | |
mbed_official | 300:55638feb26a4 | 147 | ((uint32_t)GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos) | |
mbed_official | 300:55638feb26a4 | 148 | ((uint32_t)GPIOTE_CONFIG_OUTINIT_Low << GPIOTE_CONFIG_OUTINIT_Pos); // ((uint32_t)GPIOTE_CONFIG_OUTINIT_High << |
mbed_official | 300:55638feb26a4 | 149 | // GPIOTE_CONFIG_OUTINIT_Pos);// |
mbed_official | 85:e1a8e879a6a9 | 150 | |
mbed_official | 85:e1a8e879a6a9 | 151 | /* Three NOPs are required to make sure configuration is written before setting tasks or getting events */ |
mbed_official | 85:e1a8e879a6a9 | 152 | __NOP(); |
mbed_official | 85:e1a8e879a6a9 | 153 | __NOP(); |
mbed_official | 300:55638feb26a4 | 154 | __NOP(); |
mbed_official | 85:e1a8e879a6a9 | 155 | } |
mbed_official | 300:55638feb26a4 | 156 | |
mbed_official | 85:e1a8e879a6a9 | 157 | /** @brief Function for initializing the Programmable Peripheral Interconnect peripheral. |
mbed_official | 85:e1a8e879a6a9 | 158 | */ |
mbed_official | 85:e1a8e879a6a9 | 159 | static void ppi_init(uint8_t pwm) |
mbed_official | 85:e1a8e879a6a9 | 160 | { |
mbed_official | 300:55638feb26a4 | 161 | //using ppi channels 0-7 (only 0-7 are available) |
mbed_official | 300:55638feb26a4 | 162 | uint8_t channel_number = 2 * pwm; |
mbed_official | 300:55638feb26a4 | 163 | NRF_TIMER_Type *timer = Timers[0]; |
mbed_official | 300:55638feb26a4 | 164 | |
mbed_official | 85:e1a8e879a6a9 | 165 | // Configure PPI channel 0 to toggle ADVERTISING_LED_PIN_NO on every TIMER1 COMPARE[0] match |
mbed_official | 85:e1a8e879a6a9 | 166 | NRF_PPI->CH[channel_number].TEP = (uint32_t)&NRF_GPIOTE->TASKS_OUT[pwm]; |
mbed_official | 300:55638feb26a4 | 167 | NRF_PPI->CH[channel_number + 1].TEP = (uint32_t)&NRF_GPIOTE->TASKS_OUT[pwm]; |
mbed_official | 300:55638feb26a4 | 168 | NRF_PPI->CH[channel_number].EEP = (uint32_t)&timer->EVENTS_COMPARE[pwm]; |
mbed_official | 300:55638feb26a4 | 169 | NRF_PPI->CH[channel_number + 1].EEP = (uint32_t)&timer->EVENTS_COMPARE[3]; |
mbed_official | 300:55638feb26a4 | 170 | |
mbed_official | 85:e1a8e879a6a9 | 171 | // Enable PPI channels. |
mbed_official | 300:55638feb26a4 | 172 | NRF_PPI->CHEN |= (1 << channel_number) | |
mbed_official | 300:55638feb26a4 | 173 | (1 << (channel_number + 1)); |
mbed_official | 85:e1a8e879a6a9 | 174 | } |
mbed_official | 85:e1a8e879a6a9 | 175 | |
mbed_official | 300:55638feb26a4 | 176 | void setModulation(pwmout_t *obj, uint8_t toggle, uint8_t high) |
mbed_official | 85:e1a8e879a6a9 | 177 | { |
mbed_official | 300:55638feb26a4 | 178 | if (high) { |
mbed_official | 85:e1a8e879a6a9 | 179 | NRF_GPIOTE->CONFIG[obj->pwm] |= ((uint32_t)GPIOTE_CONFIG_OUTINIT_High << GPIOTE_CONFIG_OUTINIT_Pos); |
mbed_official | 300:55638feb26a4 | 180 | if (toggle) { |
mbed_official | 300:55638feb26a4 | 181 | NRF_GPIOTE->CONFIG[obj->pwm] |= (GPIOTE_CONFIG_MODE_Task << GPIOTE_CONFIG_MODE_Pos) | |
mbed_official | 300:55638feb26a4 | 182 | ((uint32_t)GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 300:55638feb26a4 | 183 | } else { |
mbed_official | 300:55638feb26a4 | 184 | NRF_GPIOTE->CONFIG[obj->pwm] &= ~((uint32_t)GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 300:55638feb26a4 | 185 | NRF_GPIOTE->CONFIG[obj->pwm] |= ((uint32_t)GPIOTE_CONFIG_POLARITY_LoToHi << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 85:e1a8e879a6a9 | 186 | } |
mbed_official | 300:55638feb26a4 | 187 | } else { |
mbed_official | 85:e1a8e879a6a9 | 188 | NRF_GPIOTE->CONFIG[obj->pwm] &= ~((uint32_t)GPIOTE_CONFIG_OUTINIT_High << GPIOTE_CONFIG_OUTINIT_Pos); |
mbed_official | 300:55638feb26a4 | 189 | |
mbed_official | 300:55638feb26a4 | 190 | if (toggle) { |
mbed_official | 300:55638feb26a4 | 191 | NRF_GPIOTE->CONFIG[obj->pwm] |= (GPIOTE_CONFIG_MODE_Task << GPIOTE_CONFIG_MODE_Pos) | |
mbed_official | 300:55638feb26a4 | 192 | ((uint32_t)GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 300:55638feb26a4 | 193 | } else { |
mbed_official | 300:55638feb26a4 | 194 | NRF_GPIOTE->CONFIG[obj->pwm] &= ~((uint32_t)GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 300:55638feb26a4 | 195 | NRF_GPIOTE->CONFIG[obj->pwm] |= ((uint32_t)GPIOTE_CONFIG_POLARITY_HiToLo << GPIOTE_CONFIG_POLARITY_Pos); |
mbed_official | 85:e1a8e879a6a9 | 196 | } |
mbed_official | 85:e1a8e879a6a9 | 197 | } |
mbed_official | 85:e1a8e879a6a9 | 198 | } |
mbed_official | 300:55638feb26a4 | 199 | |
mbed_official | 300:55638feb26a4 | 200 | void pwmout_init(pwmout_t *obj, PinName pin) |
mbed_official | 300:55638feb26a4 | 201 | { |
mbed_official | 85:e1a8e879a6a9 | 202 | // determine the channel |
mbed_official | 85:e1a8e879a6a9 | 203 | uint8_t pwmOutSuccess = 0; |
mbed_official | 300:55638feb26a4 | 204 | PWMName pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM); |
mbed_official | 300:55638feb26a4 | 205 | |
mbed_official | 227:7bd0639b8911 | 206 | MBED_ASSERT(pwm != (PWMName)NC); |
mbed_official | 300:55638feb26a4 | 207 | |
mbed_official | 300:55638feb26a4 | 208 | if (PWM_taken[(uint8_t)pwm]) { |
mbed_official | 300:55638feb26a4 | 209 | for (uint8_t i = 1; !pwmOutSuccess && (i<NO_PWMS); i++) { |
mbed_official | 300:55638feb26a4 | 210 | if (!PWM_taken[i]) { |
mbed_official | 85:e1a8e879a6a9 | 211 | pwm = (PWMName)i; |
mbed_official | 85:e1a8e879a6a9 | 212 | PWM_taken[i] = 1; |
mbed_official | 85:e1a8e879a6a9 | 213 | pwmOutSuccess = 1; |
mbed_official | 85:e1a8e879a6a9 | 214 | } |
mbed_official | 85:e1a8e879a6a9 | 215 | } |
mbed_official | 300:55638feb26a4 | 216 | } else { |
mbed_official | 85:e1a8e879a6a9 | 217 | pwmOutSuccess = 1; |
mbed_official | 85:e1a8e879a6a9 | 218 | PWM_taken[(uint8_t)pwm] = 1; |
mbed_official | 85:e1a8e879a6a9 | 219 | } |
mbed_official | 300:55638feb26a4 | 220 | |
mbed_official | 300:55638feb26a4 | 221 | if (!pwmOutSuccess) { |
mbed_official | 85:e1a8e879a6a9 | 222 | error("PwmOut pin mapping failed. All available PWM channels are in use."); |
mbed_official | 85:e1a8e879a6a9 | 223 | } |
mbed_official | 300:55638feb26a4 | 224 | |
mbed_official | 85:e1a8e879a6a9 | 225 | obj->pwm = pwm; |
mbed_official | 85:e1a8e879a6a9 | 226 | obj->pin = pin; |
mbed_official | 300:55638feb26a4 | 227 | |
mbed_official | 300:55638feb26a4 | 228 | gpiote_init(pin, (uint8_t)pwm); |
mbed_official | 85:e1a8e879a6a9 | 229 | ppi_init((uint8_t)pwm); |
mbed_official | 300:55638feb26a4 | 230 | |
mbed_official | 300:55638feb26a4 | 231 | if (pwm == 0) { |
mbed_official | 85:e1a8e879a6a9 | 232 | NRF_POWER->TASKS_CONSTLAT = 1; |
mbed_official | 85:e1a8e879a6a9 | 233 | } |
mbed_official | 300:55638feb26a4 | 234 | |
mbed_official | 85:e1a8e879a6a9 | 235 | timer_init((uint8_t)pwm); |
mbed_official | 300:55638feb26a4 | 236 | |
mbed_official | 85:e1a8e879a6a9 | 237 | //default to 20ms: standard for servos, and fine for e.g. brightness control |
mbed_official | 85:e1a8e879a6a9 | 238 | pwmout_period_ms(obj, 20); |
mbed_official | 85:e1a8e879a6a9 | 239 | pwmout_write (obj, 0); |
mbed_official | 85:e1a8e879a6a9 | 240 | } |
mbed_official | 85:e1a8e879a6a9 | 241 | |
mbed_official | 300:55638feb26a4 | 242 | void pwmout_free(pwmout_t *obj) |
mbed_official | 300:55638feb26a4 | 243 | { |
mbed_official | 85:e1a8e879a6a9 | 244 | // [TODO] |
mbed_official | 85:e1a8e879a6a9 | 245 | } |
mbed_official | 85:e1a8e879a6a9 | 246 | |
mbed_official | 300:55638feb26a4 | 247 | void pwmout_write(pwmout_t *obj, float value) |
mbed_official | 300:55638feb26a4 | 248 | { |
mbed_official | 85:e1a8e879a6a9 | 249 | uint16_t oldPulseWidth; |
mbed_official | 300:55638feb26a4 | 250 | |
mbed_official | 229:9bd26d142f33 | 251 | NRF_TIMER2->EVENTS_COMPARE[3] = 0; |
mbed_official | 300:55638feb26a4 | 252 | NRF_TIMER2->TASKS_STOP = 1; |
mbed_official | 300:55638feb26a4 | 253 | |
mbed_official | 85:e1a8e879a6a9 | 254 | if (value < 0.0f) { |
mbed_official | 85:e1a8e879a6a9 | 255 | value = 0.0; |
mbed_official | 85:e1a8e879a6a9 | 256 | } else if (value > 1.0f) { |
mbed_official | 85:e1a8e879a6a9 | 257 | value = 1.0; |
mbed_official | 85:e1a8e879a6a9 | 258 | } |
mbed_official | 300:55638feb26a4 | 259 | |
mbed_official | 300:55638feb26a4 | 260 | oldPulseWidth = ACTUAL_PULSE[obj->pwm]; |
mbed_official | 300:55638feb26a4 | 261 | ACTUAL_PULSE[obj->pwm] = PULSE_WIDTH[obj->pwm] = value * PERIOD; |
mbed_official | 300:55638feb26a4 | 262 | |
mbed_official | 300:55638feb26a4 | 263 | if (PULSE_WIDTH[obj->pwm] == 0) { |
mbed_official | 300:55638feb26a4 | 264 | PULSE_WIDTH[obj->pwm] = 1; |
mbed_official | 300:55638feb26a4 | 265 | setModulation(obj, 0, 0); |
mbed_official | 300:55638feb26a4 | 266 | } else if (PULSE_WIDTH[obj->pwm] == PERIOD) { |
mbed_official | 300:55638feb26a4 | 267 | PULSE_WIDTH[obj->pwm] = PERIOD - 1; |
mbed_official | 300:55638feb26a4 | 268 | setModulation(obj, 0, 1); |
mbed_official | 300:55638feb26a4 | 269 | } else if ((oldPulseWidth == 0) || (oldPulseWidth == PERIOD)) { |
mbed_official | 300:55638feb26a4 | 270 | setModulation(obj, 1, oldPulseWidth == PERIOD); |
mbed_official | 85:e1a8e879a6a9 | 271 | } |
mbed_official | 300:55638feb26a4 | 272 | |
mbed_official | 300:55638feb26a4 | 273 | NRF_TIMER2->INTENSET = TIMER_INTENSET_COMPARE3_Msk; |
mbed_official | 300:55638feb26a4 | 274 | NRF_TIMER2->SHORTS = TIMER_SHORTS_COMPARE3_CLEAR_Msk | TIMER_SHORTS_COMPARE3_STOP_Msk; |
mbed_official | 229:9bd26d142f33 | 275 | NRF_TIMER2->TASKS_START = 1; |
mbed_official | 85:e1a8e879a6a9 | 276 | } |
mbed_official | 85:e1a8e879a6a9 | 277 | |
mbed_official | 300:55638feb26a4 | 278 | float pwmout_read(pwmout_t *obj) |
mbed_official | 300:55638feb26a4 | 279 | { |
mbed_official | 300:55638feb26a4 | 280 | return ((float)PULSE_WIDTH[obj->pwm] / (float)PERIOD); |
mbed_official | 85:e1a8e879a6a9 | 281 | } |
mbed_official | 85:e1a8e879a6a9 | 282 | |
mbed_official | 300:55638feb26a4 | 283 | void pwmout_period(pwmout_t *obj, float seconds) |
mbed_official | 300:55638feb26a4 | 284 | { |
mbed_official | 85:e1a8e879a6a9 | 285 | pwmout_period_us(obj, seconds * 1000000.0f); |
mbed_official | 85:e1a8e879a6a9 | 286 | } |
mbed_official | 85:e1a8e879a6a9 | 287 | |
mbed_official | 300:55638feb26a4 | 288 | void pwmout_period_ms(pwmout_t *obj, int ms) |
mbed_official | 300:55638feb26a4 | 289 | { |
mbed_official | 85:e1a8e879a6a9 | 290 | pwmout_period_us(obj, ms * 1000); |
mbed_official | 85:e1a8e879a6a9 | 291 | } |
mbed_official | 85:e1a8e879a6a9 | 292 | |
mbed_official | 85:e1a8e879a6a9 | 293 | // Set the PWM period, keeping the duty cycle the same. |
mbed_official | 300:55638feb26a4 | 294 | void pwmout_period_us(pwmout_t *obj, int us) |
mbed_official | 300:55638feb26a4 | 295 | { |
mbed_official | 300:55638feb26a4 | 296 | uint32_t periodInTicks = us / TIMER_PRECISION; |
mbed_official | 300:55638feb26a4 | 297 | |
mbed_official | 229:9bd26d142f33 | 298 | NRF_TIMER2->EVENTS_COMPARE[3] = 0; |
mbed_official | 300:55638feb26a4 | 299 | NRF_TIMER2->TASKS_STOP = 1; |
mbed_official | 300:55638feb26a4 | 300 | |
mbed_official | 300:55638feb26a4 | 301 | if (periodInTicks>((1 << 16) - 1)) { |
mbed_official | 300:55638feb26a4 | 302 | PERIOD = (1 << 16) - 1; //131ms |
mbed_official | 300:55638feb26a4 | 303 | } else if (periodInTicks<5) { |
mbed_official | 300:55638feb26a4 | 304 | PERIOD = 5; |
mbed_official | 300:55638feb26a4 | 305 | } else { |
mbed_official | 300:55638feb26a4 | 306 | PERIOD = periodInTicks; |
mbed_official | 85:e1a8e879a6a9 | 307 | } |
mbed_official | 300:55638feb26a4 | 308 | NRF_TIMER2->INTENSET = TIMER_INTENSET_COMPARE3_Msk; |
mbed_official | 300:55638feb26a4 | 309 | NRF_TIMER2->SHORTS = TIMER_SHORTS_COMPARE3_CLEAR_Msk | TIMER_SHORTS_COMPARE3_STOP_Msk; |
mbed_official | 300:55638feb26a4 | 310 | NRF_TIMER2->TASKS_START = 1; |
mbed_official | 85:e1a8e879a6a9 | 311 | } |
mbed_official | 85:e1a8e879a6a9 | 312 | |
mbed_official | 300:55638feb26a4 | 313 | void pwmout_pulsewidth(pwmout_t *obj, float seconds) |
mbed_official | 300:55638feb26a4 | 314 | { |
mbed_official | 85:e1a8e879a6a9 | 315 | pwmout_pulsewidth_us(obj, seconds * 1000000.0f); |
mbed_official | 85:e1a8e879a6a9 | 316 | } |
mbed_official | 85:e1a8e879a6a9 | 317 | |
mbed_official | 300:55638feb26a4 | 318 | void pwmout_pulsewidth_ms(pwmout_t *obj, int ms) |
mbed_official | 300:55638feb26a4 | 319 | { |
mbed_official | 85:e1a8e879a6a9 | 320 | pwmout_pulsewidth_us(obj, ms * 1000); |
mbed_official | 85:e1a8e879a6a9 | 321 | } |
mbed_official | 85:e1a8e879a6a9 | 322 | |
mbed_official | 300:55638feb26a4 | 323 | void pwmout_pulsewidth_us(pwmout_t *obj, int us) |
mbed_official | 300:55638feb26a4 | 324 | { |
mbed_official | 300:55638feb26a4 | 325 | uint32_t pulseInTicks = us / TIMER_PRECISION; |
mbed_official | 85:e1a8e879a6a9 | 326 | uint16_t oldPulseWidth = ACTUAL_PULSE[obj->pwm]; |
mbed_official | 300:55638feb26a4 | 327 | |
mbed_official | 229:9bd26d142f33 | 328 | NRF_TIMER2->EVENTS_COMPARE[3] = 0; |
mbed_official | 300:55638feb26a4 | 329 | NRF_TIMER2->TASKS_STOP = 1; |
mbed_official | 300:55638feb26a4 | 330 | |
mbed_official | 85:e1a8e879a6a9 | 331 | ACTUAL_PULSE[obj->pwm] = PULSE_WIDTH[obj->pwm] = pulseInTicks; |
mbed_official | 300:55638feb26a4 | 332 | |
mbed_official | 300:55638feb26a4 | 333 | if (PULSE_WIDTH[obj->pwm] == 0) { |
mbed_official | 85:e1a8e879a6a9 | 334 | PULSE_WIDTH[obj->pwm] = 1; |
mbed_official | 300:55638feb26a4 | 335 | setModulation(obj, 0, 0); |
mbed_official | 300:55638feb26a4 | 336 | } else if (PULSE_WIDTH[obj->pwm] == PERIOD) { |
mbed_official | 300:55638feb26a4 | 337 | PULSE_WIDTH[obj->pwm] = PERIOD - 1; |
mbed_official | 300:55638feb26a4 | 338 | setModulation(obj, 0, 1); |
mbed_official | 300:55638feb26a4 | 339 | } else if ((oldPulseWidth == 0) || (oldPulseWidth == PERIOD)) { |
mbed_official | 300:55638feb26a4 | 340 | setModulation(obj, 1, oldPulseWidth == PERIOD); |
mbed_official | 85:e1a8e879a6a9 | 341 | } |
mbed_official | 300:55638feb26a4 | 342 | NRF_TIMER2->INTENSET = TIMER_INTENSET_COMPARE3_Msk; |
mbed_official | 300:55638feb26a4 | 343 | NRF_TIMER2->SHORTS = TIMER_SHORTS_COMPARE3_CLEAR_Msk | TIMER_SHORTS_COMPARE3_STOP_Msk; |
mbed_official | 300:55638feb26a4 | 344 | NRF_TIMER2->TASKS_START = 1; |
mbed_official | 85:e1a8e879a6a9 | 345 | } |