mbed library sources. Supersedes mbed-src. Add PORTG support for STM32L476JG (SensorTile kit)
Fork of mbed-dev by
targets/TARGET_ONSEMI/TARGET_NCS36510/timer_map.h
- Committer:
- shaoziyang
- Date:
- 2017-01-02
- Revision:
- 154:1375a99fb16d
- Parent:
- 149:156823d33999
File content as of revision 154:1375a99fb16d:
/** ****************************************************************************** * @file timer_map.h * @brief Timer HW register map * @internal * @author ON Semiconductor * $Rev: 3423 $ * $Date: 2015-06-09 11:16:49 +0530 (Tue, 09 Jun 2015) $ ****************************************************************************** * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). * All rights reserved. This software and/or documentation is licensed by ON Semiconductor * under limited terms and conditions. The terms and conditions pertaining to the software * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and * if applicable the software license agreement. Do not use this software and/or * documentation unless you have carefully read and you agree to the limited terms and * conditions. By using this software and/or documentation, you agree to the limited * terms and conditions. * * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * @endinternal * * @ingroup timer * * @details * <p> * Timer HW register map description * </p> * * <h1> Reference document(s) </h1> * <p> * <a href="../pdf/IPC7200_Timer_APB_DS_v1P2.pdf" target="_blank"> * IPC7200 APB Timer Design Specification v1.2</a> * </p> */ #ifndef TIMER_MAP_H_ #define TIMER_MAP_H_ #ifdef __cplusplus extern "C" { #endif #include "architecture.h" /** Timer HW Structure Overlay */ typedef struct { __IO uint32_t LOAD; /**< 16bit counter (re-)load value */ __I uint32_t VALUE; /**< 16bit current counter value */ union { struct { __IO uint32_t PAD0 :2; /**< Always reads 0 */ __IO uint32_t PRESCALE :3; /**< 0:no division, 1..7: divide by 16, 256, 2, 8, 32, 128, 1024*/ __IO uint32_t PAD1 :1; /**< Always reads 0 */ __IO uint32_t MODE :1; /**< 0:free-run, 1:periodic */ __IO uint32_t ENABLE :1; /**< 0: disable, 1:enable */ __I uint32_t INT :1; /**< interrupt status */ } BITS; __IO uint32_t WORD; } CONTROL; __O uint32_t CLEAR; /**< Write any value to clear the interrupt */ } TimerReg_t, *TimerReg_pt; #ifdef __cplusplus } #endif #endif /* TIMER_MAP_H_ */