Shao Rui
/
spine_2020_9_8
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: main.cpp
- Revision:
- 3:9ef9b4c66648
- Parent:
- 2:25837cbaee98
- Child:
- 5:4875dac25118
- Child:
- 6:52b418e1d6d0
- Child:
- 7:f10513577d4c
diff -r 25837cbaee98 -r 9ef9b4c66648 main.cpp
--- a/main.cpp Wed Nov 29 17:48:13 2017 +0000
+++ b/main.cpp Wed May 02 18:09:14 2018 +0000
@@ -1,130 +1,93 @@
-#define CAN_ID 0x0
#include "mbed.h"
#include "math_ops.h"
-
+#include <cstring>
+#include "leg_message.h"
-Serial pc(PA_2, PA_3);
-CAN can1(PB_8, PB_9); // CAN Rx pin name, CAN Tx pin name
-CAN can2(PB_5, PB_13); // CAN Rx pin name, CAN Tx pin name
-CANMessage rxMsg1, rxMsg2;
-CANMessage abad1, abad2, hip1, hip2, knee1, knee2; //TX Messages
-int ledState;
-Ticker sendCAN;
-int counter = 0;
-volatile bool msgAvailable = false;
-Ticker loop;
-AnalogIn knob(PC_0);
-DigitalOut toggle(PC_3);
-DigitalOut toggle2(PC_2);
+// length of receive/transmit buffers
+#define RX_LEN 66
+#define TX_LEN 66
-///[[abad1, abad2]
-///[hip1, hip2]
-///[knee1, knee2]]
-float q1raw[3];
-float q2raw[3];
-float dq1raw[3];
-float dq2raw[3];
-float q1[3]; //Leg 1 joint angles
-float dq1[3]; //Leg 1 joint velocities
-float tau1[3]; //Leg 1 joint torques
-float q2[3]; //Leg 2 joint angles
-float dq2[3]; //Leg 2 joint velocities
-float tau2[3]; //Leg 2 joint torques
-float p1[3]; //Leg 1 end effector position
-float v1[3]; //Leg 1 end effector velocity
-float J1[3][3]; //Leg 1 Jacobian
-float f1[3]; //Leg 1 end effector forces
-float p2[3]; //Leg 2 end effector position
-float v2[3]; //Leg 2 end effector velocity
-float J2[3][3]; //Leg 2 Jacobian
-float f2[3]; //Leg 2 end effector forces
+// length of outgoing/incoming messages
+#define DATA_LEN 30
+#define CMD_LEN 66
-float q[3][2]; //Joint states for both legs
-float dq[3][2];
-float tau[3][3];
-
-float I[3] = {0.005f, 0.0045f, 0.006f}; //Joint space inertias
-float M1[3][3]; //Leg 1 end effector inverse mass
-float M2[3][3]; //Leg 2 end effector inverse mass
-float KD1[3]; //Joint space damping
-float KD2[3];
-float contact1[3];
-float contact2[3];
+// Master CAN ID ///
+#define CAN_ID 0x0
-const float offset[3] = {0.0f, 3.493f, -2.766f}; //Joint angle offsets at zero position
-
-float kp = 800.0f;
-float kd = 100.0f;
-float kp_q = 100.0f;
-float kd_q = 0.8f;
-int enabled = 0;
-float scaling = 0;
-
-
-int control_mode = 0;
/// Value Limits ///
#define P_MIN -12.5f
#define P_MAX 12.5f
- #define V_MIN -30.0f
- #define V_MAX 30.0f
+ #define V_MIN -45.0f
+ #define V_MAX 45.0f
#define KP_MIN 0.0f
#define KP_MAX 500.0f
#define KD_MIN 0.0f
#define KD_MAX 5.0f
#define T_MIN -18.0f
#define T_MAX 18.0f
- #define I_MAX 40.0f
- #define L1 0.0577f
- #define L2 0.2088f
- #define L3 0.175f
-
- void kinematics(const float q[3], const float dq[3], float* p, float* v, float (* J)[3], float (* M)[3]){
- const float s1 = sinf(q[0]);
- const float s2 = sinf(q[1]);
- const float s3 = sinf(q[2]);
- const float c1 = cosf(q[0]);
- const float c2 = cosf(q[1]);
- const float c3 = cosf(q[2]);
-
- const float c23 = c2*c3 - s2*s3;
- const float s23 = s2*c3 + c2*s3;
-
- p[0] = L3*s23 + L2*s2;
- p[1] = L1*c1 + L3*s1*c23 + L2*c2*s1;
- p[2] = L1*s1 - L3*c1*c23 - L2*c1*c2;
-
- J[0][0] = 0;
- J[0][1] = L3*c23 + L2*c2;
- J[0][2] = L3*c23;
- J[1][0] = L3*c1*c23 + L2*c1*c2 - L1*s1;
- J[1][1] = -L3*s1*s23 - L2*s1*s2;
- J[1][2] = -L3*s1*s23;
- J[2][0] = L3*s1*c23 + L2*c2*s1 + L1*c1;
- J[2][1] = L3*c1*s23 + L2*c1*s2;
- J[2][2] = L3*c1*s23;
-
- M[0][0] = J[0][0]*J[0][0]/I[0] + J[0][1]*J[0][1]/I[1] + J[0][2]*J[0][2]/I[2];
- M[0][1] = 0;
- M[0][2] = 0;
- M[1][0] = 0;
- M[1][1] = J[1][0]*J[1][0]/I[0] + J[1][1]*J[1][1]/I[1] + J[1][2]*J[1][2]/I[2];
- M[1][2] = 0;
- M[2][0] = 0;
- M[2][1] = 0;
- M[2][2] = J[2][0]*J[2][0]/I[0] + J[2][1]*J[2][1]/I[1] + J[2][2]*J[2][2]/I[2];
-
- v[0] = 0; v[1] = 0; v[2] = 0;
- for(int i = 0; i<3; i++){
- for(int j = 0; j<3; j++){
- v[i] += J[i][j]*dq[j];
- }
- }
- }
-
+ /// Joint Soft Stops ///
+ #define A_LIM_P 1.5f
+ #define A_LIM_N -1.5f
+ #define H_LIM_P 5.0f
+ #define H_LIM_N -5.0f
+ #define K_LIM_P 0.2f
+ #define K_LIM_N 7.7f
+ #define KP_SOFTSTOP 100.0f
+ #define KD_SOFTSTOP 0.4f;
+
+#define ENABLE_CMD 0xFFFF
+#define DISABLE_CMD 0x1F1F
+
+spi_data_t spi_data; // data from spine to up
+spi_command_t spi_command; // data from up to spine
+
+// spi buffers
+uint16_t rx_buff[RX_LEN];
+uint16_t tx_buff[TX_LEN];
+
+DigitalOut led(PC_5);
+
+
+Serial pc(PA_2, PA_3);
+CAN can1(PB_12, PB_13); // CAN Rx pin name, CAN Tx pin name
+CAN can2(PB_8, PB_9); // CAN Rx pin name, CAN Tx pin name
+
+CANMessage rxMsg1, rxMsg2;
+CANMessage txMsg1, txMsg2;
+CANMessage a1_can, a2_can, h1_can, h2_can, k1_can, k2_can; //TX Messages
+int ledState;
+Ticker sendCAN;
+int counter = 0;
+volatile bool msgAvailable = false;
+Ticker loop;
+
+int spi_enabled = 0;
+InterruptIn cs(PA_4);
+DigitalIn estop(PA_14);
+//SPISlave spi(PA_7, PA_6, PA_5, PA_4);
+
+
+leg_state l1_state, l2_state;;
+leg_control l1_control, l2_control;
+
+uint16_t x = 0;
+uint16_t x2 = 0;
+uint16_t count = 0;
+uint16_t counter2 = 0;
+
+int control_mode = 1;
+int is_standing = 0;
+int enabled = 0;
+
+ // generates fake spi data from spi command
+void test_control();
+void control();
+
+
/// CAN Command Packet Structure ///
/// 16 bit position command, between -4*pi and 4*pi
/// 12 bit velocity command, between -30 and + 30 rad/s
@@ -142,20 +105,20 @@
/// 6: [kd[3-0], torque[11-8]]
/// 7: [torque[7-0]]
-void pack_cmd(CANMessage * msg, float p_des, float v_des, float kp, float kd, float t_ff){
+void pack_cmd(CANMessage * msg, joint_control joint){
/// limit data to be within bounds ///
- p_des = fminf(fmaxf(P_MIN, p_des), P_MAX);
- v_des = fminf(fmaxf(V_MIN, v_des), V_MAX);
- kp = fminf(fmaxf(KP_MIN, kp), KP_MAX);
- kd = fminf(fmaxf(KD_MIN, kd), KD_MAX);
- t_ff = fminf(fmaxf(T_MIN, t_ff), T_MAX);
+ float p_des = fminf(fmaxf(P_MIN, joint.p_des), P_MAX);
+ float v_des = fminf(fmaxf(V_MIN, joint.v_des), V_MAX);
+ float kp = fminf(fmaxf(KP_MIN, joint.kp), KP_MAX);
+ float kd = fminf(fmaxf(KD_MIN, joint.kd), KD_MAX);
+ float t_ff = fminf(fmaxf(T_MIN, joint.t_ff), T_MAX);
/// convert floats to unsigned ints ///
- int p_int = float_to_uint(p_des, P_MIN, P_MAX, 16);
- int v_int = float_to_uint(v_des, V_MIN, V_MAX, 12);
- int kp_int = float_to_uint(kp, KP_MIN, KP_MAX, 12);
- int kd_int = float_to_uint(kd, KD_MIN, KD_MAX, 12);
- int t_int = float_to_uint(t_ff, T_MIN, T_MAX, 12);
+ uint16_t p_int = float_to_uint(p_des, P_MIN, P_MAX, 16);
+ uint16_t v_int = float_to_uint(v_des, V_MIN, V_MAX, 12);
+ uint16_t kp_int = float_to_uint(kp, KP_MIN, KP_MAX, 12);
+ uint16_t kd_int = float_to_uint(kd, KD_MIN, KD_MAX, 12);
+ uint16_t t_int = float_to_uint(t_ff, T_MIN, T_MAX, 12);
/// pack ints into the can buffer ///
msg->data[0] = p_int>>8;
msg->data[1] = p_int&0xFF;
@@ -179,234 +142,84 @@
/// 3: [velocity[3-0], current[11-8]]
/// 4: [current[7-0]]
-void unpack_reply(CANMessage msg, int leg_num){
+void unpack_reply(CANMessage msg, leg_state * leg){
/// unpack ints from can buffer ///
- int id = msg.data[0];
- int p_int = (msg.data[1]<<8)|msg.data[2];
- int v_int = (msg.data[3]<<4)|(msg.data[4]>>4);
- int i_int = ((msg.data[4]&0xF)<<8)|msg.data[5];
- /// convert ints to floats ///
+ uint16_t id = msg.data[0];
+ uint16_t p_int = (msg.data[1]<<8)|msg.data[2];
+ uint16_t v_int = (msg.data[3]<<4)|(msg.data[4]>>4);
+ uint16_t i_int = ((msg.data[4]&0xF)<<8)|msg.data[5];
+ /// convert uints to floats ///
float p = uint_to_float(p_int, P_MIN, P_MAX, 16);
float v = uint_to_float(v_int, V_MIN, V_MAX, 12);
float t = uint_to_float(i_int, -T_MAX, T_MAX, 12);
- float qraw = p;
- float vraw = v;
- if(id==3){ //Extra belt 28:18 belt reduction on the knees;
- p = -p*0.643f;
- v = -v*0.643f;
- }
- else if(id==1){
- p = -p;
- v = -v;
- }
- p = p+offset[id-1];
- if(leg_num == 0){
- q1raw[id-1] = qraw;
- dq1raw[id-1] = vraw;
- q1[id-1] = p;
- dq1[id-1] = v;
+
+ if(id==1){
+ leg->a.p = p;
+ leg->a.v = v;
+ leg->a.t = t;
}
- else if(leg_num==1){
- q2raw[id-1] = qraw;
- dq2raw[id-1] = vraw;
- q2[id-1] = p;
- dq2[id-1] = v;
+ else if(id==2){
+ leg->h.p = p;
+ leg->h.v = v;
+ leg->h.t = t;
}
-
- /*
- if(id == 2){
- theta1 = p;
- dtheta1 = v;
+ else if(id==3){
+ leg->k.p = p;
+ leg->k.v = v;
+ leg->k.t = t;
}
- else if(id ==3){
- theta2 = p;
- dtheta2 = v;
- }
- */
-
- //printf("%d %.3f %.3f %.3f\n\r", id, p, v, i);
}
-
+
void rxISR1() {
can1.read(rxMsg1); // read message into Rx message storage
- unpack_reply(rxMsg1, 0);
+ unpack_reply(rxMsg1, &l1_state);
}
void rxISR2(){
can2.read(rxMsg2);
- unpack_reply(rxMsg2, 1);
+ unpack_reply(rxMsg2, &l2_state);
}
-
+void PackAll(){
+ pack_cmd(&a1_can, l1_control.a);
+ pack_cmd(&a2_can, l2_control.a);
+ pack_cmd(&h1_can, l1_control.h);
+ pack_cmd(&h2_can, l2_control.h);
+ pack_cmd(&k1_can, l1_control.k);
+ pack_cmd(&k2_can, l2_control.k);
+
+ }
void WriteAll(){
//toggle = 1;
- can1.write(abad1);
- wait(.0001);
- can2.write(abad2);
- wait(.0001);
- can1.write(hip1);
- wait(.0001);
- can2.write(hip2);
- wait(.0001);
- can1.write(knee1);
- wait(.0001);
- can2.write(knee2);
- wait(.0001);
+ can1.write(a1_can);
+ wait(.00002);
+ can2.write(a2_can);
+ wait(.00002);
+ can1.write(h1_can);
+ wait(.00002);
+ can2.write(h2_can);
+ wait(.00002);
+ can1.write(k1_can);
+ wait(.00002);
+ can2.write(k2_can);
+ wait(.00002);
//toggle = 0;
}
void sendCMD(){
- /// bilateral teleoperation demo ///
- toggle2 = 1;
counter ++;
- scaling = .99f*scaling + .01f*knob.read();
-
- kinematics(q1, dq1, p1, v1, J1, M1);
- kinematics(q2, dq2, p2, v2, J2, M2);
+
+ PackAll();
+
+ if(counter>100){
+ printf("%.3f %.3f %.3f %.3f %.3f %.3f\n\r", l1_state.a.p, l1_state.h.p, l1_state.k.p, l2_state.a.p, l2_state.h.p, l2_state.k.p);
+ counter = 0 ;
+ }
- if(enabled){
- switch(control_mode){
- case 0:
- {
- KD1[0] = 0; KD1[1] = 0; KD1[2] = 0;
- KD2[0] = 0; KD2[1] = 0; KD2[2] = 0;
- tau1[0] = 0; tau1[1] = 0; tau1[2] = 0;
- tau2[0] = 0; tau2[1] = 0; tau2[2] = 0;
- pack_cmd(&abad1, 0, 0, 0, 0, 0);
- pack_cmd(&abad2, 0, 0, 0, 0, 0);
- pack_cmd(&hip1, 0, 0, 0, 0, 0);
- pack_cmd(&hip2, 0, 0, 0, 0, 0);
- pack_cmd(&knee1, 0, 0, 0, 0, 0);
- pack_cmd(&knee2, 0, 0, 0, 0, 0);
- }
- break;
- case 1:
- {
- //Joint Coupling
- KD1[0] = 0; KD1[1] = 0; KD1[2] = 0;
- KD2[0] = 0; KD2[1] = 0; KD2[2] = 0;
- tau1[0] = -scaling*(kp_q*(q2[0] - q1[0]) + kd_q*(dq2[0] - dq1[0]));
- tau2[0] = -scaling*(kp_q*(q1[0] - q2[0]) + kd_q*(dq1[0] - dq2[0]));
- tau1[1] = scaling*(kp_q*(q2[1] - q1[1]) + kd_q*(dq2[1] - dq1[1]));
- tau2[1] = scaling*(kp_q*(q1[1] - q2[1]) + kd_q*(dq1[1] - dq2[1]));
- tau1[2] = -scaling*((kp_q/1.5f)*(q2[2] - q1[2]) + (kd_q/2.25f)*(dq2[2] - dq1[2]));
- tau2[2] = -scaling*((kp_q/1.5f)*(q1[2] - q2[2]) + (kd_q/2.25f)*(dq1[2] - dq2[2]));
-
- pack_cmd(&abad1, 0, 0, 0, KD1[0]+.005f, tau1[0]);
- pack_cmd(&abad2, 0, 0, 0, KD2[0]+.005f, tau2[0]);
- pack_cmd(&hip1, 0, 0, 0, KD1[1]+.005f, tau1[1]);
- pack_cmd(&hip2, 0, 0, 0, KD2[1]+.005f, tau2[1]);
- pack_cmd(&knee1, 0, 0, 0, KD1[2]+.0033f, tau1[2]);
- pack_cmd(&knee2, 0, 0, 0, KD2[2]+.0033f, tau2[2]);
- }
- break;
-
- case 2:
- {
- //Virtual Walls
- const float kmax = 25000.0f;
- const float wn_des = 100000.0f;
- const float xlim = 0.0f;
- const float ylim = 0.2f;
- const float zlim = -.2f;
-
- contact1[0] = p1[0]<xlim;
- contact2[0] = p2[0]<xlim;
- contact1[1] = p1[1]>ylim;
- contact2[1] = p2[1]>ylim;
- contact1[2] = p1[2]<zlim;
- contact2[2] = p2[2]<zlim;
-
- float kx1 = wn_des/M1[0][0];
- float kx2 = wn_des/M2[0][0];
- kx1 = fminf(kmax, kx1);
- kx2 = fminf(kmax, kx2);
- f1[0] = scaling*(kx1*(xlim - p1[0]) + 0.0f*kd*(0 - v1[0]))*contact1[0];
- f2[0] = scaling*(kx2*(xlim - p2[0]) + 0.0f*kd*(0 - v2[0]))*contact2[0];
-
- float ky1 = wn_des/M1[1][1];
- float ky2 = wn_des/M2[1][1];
- ky1 = fminf(kmax, ky1);
- ky2 = fminf(kmax, ky2);
- f1[1] = scaling*(ky1*(ylim - p1[1]) + 0.0f*kd*(0 - v1[1]))*contact1[1];
- f2[1] = scaling*(ky2*(ylim - p2[1]) + 0.0f*kd*(0 - v2[1]))*contact2[1];
-
- float kz1 = wn_des/M1[2][2];
- float kz2 = wn_des/M2[2][2];
- kz1 = fminf(kmax, kz1);
- kz2 = fminf(kmax, kz2);
- f1[2] = scaling*(kz1*(zlim - p1[2]) + 0.0f*kd*(0 - v1[2]))*contact1[2];
- f2[2] = scaling*(kz2*(zlim - p2[2]) + 0.0f*kd*(0 - v2[2]))*contact2[2];
- //
-
- tau1[0] = -1*(f1[0]*J1[0][0] + f1[1]*J1[1][0] + f1[2]*J1[2][0]);
- tau2[0] = -1*(f2[0]*J2[0][0] + f2[1]*J2[1][0] + f2[2]*J2[2][0]);
- tau1[1] = f1[0]*J1[0][1] + f1[1]*J1[1][1] + f1[2]*J1[2][1];
- tau2[1] = f2[0]*J2[0][1] + f2[1]*J2[1][1] + f2[2]*J2[2][1];
- tau1[2] = -1*(f1[0]*J1[0][2] + f1[1]*J1[1][2] + f1[2]*J1[2][2]);
- tau2[2] = -1*(f2[0]*J2[0][2] + f2[1]*J2[1][2] + f2[2]*J2[2][2]);
-
- KD1[0] = 0.4f*(kd*scaling)*(contact1[0]*J1[0][0]*J1[0][0] + contact1[1]*J1[1][0]*J1[1][0] + contact1[2]*J1[2][0]*J1[2][0]);
- KD2[0] = 0.4f*(kd*scaling)*(contact2[0]*J2[0][0]*J2[0][0] + contact2[1]*J2[1][0]*J2[1][0] + contact2[2]*J2[2][0]*J2[2][0]);
- KD1[1] = 0.4f*(kd*scaling)*(contact1[0]*J1[0][1]*J1[0][1] + contact1[1]*J1[1][1]*J1[1][1] + contact1[2]*J1[2][1]*J1[2][1]);
- KD2[1] = 0.4f*(kd*scaling)*(contact2[0]*J2[0][1]*J2[0][1] + contact2[1]*J2[1][1]*J2[1][1] + contact2[2]*J2[2][1]*J2[2][1]);
- KD1[2] = 0.4f*0.44f*(kd*scaling)*(contact1[0]*J1[0][2]*J1[0][2] + contact1[1]*J1[1][2]*J1[1][2] + contact1[2]*J1[2][2]*J1[2][2]);
- KD2[2] = 0.4f*0.44f*(kd*scaling)*(contact2[0]*J2[0][2]*J2[0][2] + contact2[1]*J2[1][2]*J2[1][2] + contact2[2]*J2[2][2]*J2[2][2]);
-
- pack_cmd(&abad1, 0, 0, 0, KD1[0]+.005f, tau1[0]);
- pack_cmd(&abad2, 0, 0, 0, KD2[0]+.005f, tau2[0]);
- pack_cmd(&hip1, 0, 0, 0, KD1[1]+.005f, tau1[1]);
- pack_cmd(&hip2, 0, 0, 0, KD2[1]+.005f, tau2[1]);
- pack_cmd(&knee1, 0, 0, 0, KD1[2]+.0033f, tau1[2]);
- pack_cmd(&knee2, 0, 0, 0, KD2[2]+.0033f, tau2[2]);
- }
- break;
-
- case 3:
- {
- pack_cmd(&abad1, q2raw[0], dq2raw[0], 2.0f*kp_q*scaling, 2.0f*kd_q*scaling, 0);
- pack_cmd(&abad2, 0, 0, 0, 0, 0);
- pack_cmd(&hip1, q2raw[1], dq2raw[1], 2.0f*kp_q*scaling, 2.0f*kd_q*scaling, 0);
- pack_cmd(&hip2, 0, 0, 0, 0, 0);
- pack_cmd(&knee1, q2raw[2], dq2raw[2], 2.0f*kp_q*scaling, 2.0f*kd_q*scaling, 0);
- pack_cmd(&knee2, 0, 0, 0, 0, 0);
- }
- break;
- //
-
- }
+ WriteAll();
-
-
-
-
-
-
+ }
- if(counter>100){
- //tcmd = -1*tcmd;
- //printf("%.4f %.4f \n\r", q1[1], q2[1]);
- //printf("%f\n\r", scaling);
- counter = 0 ;
- }
- /*
- pack_cmd(&abad1, q[0][1], dq[0][1], kp, kd, 0);
- pack_cmd(&abad2, q[0][0], dq[0][0], kp, kd, 0);
- pack_cmd(&hip1, q[1][1], dq[1][1], kp, kd, 0);
- pack_cmd(&hip2, q[1][0], dq[1][0], kp, kd, 0);
- pack_cmd(&knee1, q[2][1], dq[2][1], kp/1.5f, kd/2.25f, 0);
- pack_cmd(&knee2, q[2][0], dq[2][0], kp/1.5f, kd/2.25f, 0);
- */
- }
-/*
- pack_cmd(&abad1, 0, 0, 10, .1, 0);
- pack_cmd(&abad2, 0, 0, 10, .1, 0);
- pack_cmd(&hip1, 0, 0, 10, .1, 0);
- pack_cmd(&hip2, 0, 0, 10, .1, 0);
- pack_cmd(&knee1, 0, 0, 6.6, .04, 0);
- pack_cmd(&knee2, 0, 0, 6.6, .04, 0);
-*/
-toggle2 = 0;
- WriteAll();
- }
+
+
void Zero(CANMessage * msg){
msg->data[0] = 0xFF;
@@ -429,7 +242,7 @@
msg->data[5] = 0xFF;
msg->data[6] = 0xFF;
msg->data[7] = 0xFC;
- WriteAll();
+ //WriteAll();
}
void ExitMotorMode(CANMessage * msg){
@@ -441,62 +254,51 @@
msg->data[5] = 0xFF;
msg->data[6] = 0xFF;
msg->data[7] = 0xFD;
- WriteAll();
+ //WriteAll();
}
void serial_isr(){
/// handle keyboard commands from the serial terminal ///
while(pc.readable()){
char c = pc.getc();
+ //led = !led;
switch(c){
case(27):
- loop.detach();
+ //loop.detach();
printf("\n\r exiting motor mode \n\r");
- ExitMotorMode(&abad1);
- ExitMotorMode(&abad2);
- ExitMotorMode(&hip1);
- ExitMotorMode(&hip2);
- ExitMotorMode(&knee1);
- ExitMotorMode(&knee2);
+ ExitMotorMode(&a1_can);
+ ExitMotorMode(&a2_can);
+ ExitMotorMode(&h1_can);
+ ExitMotorMode(&h2_can);
+ ExitMotorMode(&k1_can);
+ ExitMotorMode(&k2_can);
enabled = 0;
break;
case('m'):
printf("\n\r entering motor mode \n\r");
- EnterMotorMode(&abad1);
- Zero(&abad1);
- EnterMotorMode(&abad2);
- Zero(&abad2);
- EnterMotorMode(&hip1);
- Zero(&hip1);
- EnterMotorMode(&hip2);
- Zero(&hip2);
- EnterMotorMode(&knee1);
- Zero(&knee1);
- EnterMotorMode(&knee2);
- Zero(&knee2);
+ EnterMotorMode(&a1_can);
+ EnterMotorMode(&a2_can);
+ EnterMotorMode(&h1_can);
+ EnterMotorMode(&h2_can);
+ EnterMotorMode(&k1_can);
+ EnterMotorMode(&k2_can);
wait(.5);
enabled = 1;
- loop.attach(&sendCMD, .001);
+ //loop.attach(&sendCMD, .001);
+ break;
+ case('s'):
+ printf("\n\r standing \n\r");
+ counter2 = 0;
+ is_standing = 1;
+ //stand();
break;
case('z'):
printf("\n\r zeroing \n\r");
- Zero(&abad1);
- Zero(&abad2);
- Zero(&hip1);
- Zero(&hip2);
- Zero(&knee1);
- Zero(&knee2);
- break;
- case('0'):
- control_mode = 0;
- break;
- case('1'):
- control_mode = 1;
- break;
- case('2'):
- control_mode = 2;
- break;
- case('3'):
- control_mode = 3;
+ Zero(&a1_can);
+ Zero(&a2_can);
+ Zero(&h1_can);
+ Zero(&h2_can);
+ Zero(&k1_can);
+ Zero(&k2_can);
break;
}
}
@@ -504,68 +306,316 @@
}
-int can_packet[8] = {1, 2, 3, 4, 5, 6, 7, 8};
-int main() {
- //wait(.5);
+uint32_t xor_checksum(uint32_t* data, size_t len)
+{
+ uint32_t t = 0;
+ for(int i = 0; i < len; i++)
+ t = t ^ data[i];
+ return t;
+}
+
+void spi_isr(void)
+{
+ GPIOC->ODR |= (1 << 8);
+ GPIOC->ODR &= ~(1 << 8);
+ int bytecount = 0;
+ SPI1->DR = tx_buff[0];
+ while(cs == 0) {
+ if(SPI1->SR&0x1) {
+ rx_buff[bytecount] = SPI1->DR;
+ bytecount++;
+ if(bytecount<TX_LEN) {
+ SPI1->DR = tx_buff[bytecount];
+ }
+ }
+
+ }
- pc.baud(921600);
- pc.attach(&serial_isr);
- can1.frequency(1000000); // set bit rate to 1Mbps
- can1.attach(&rxISR1); // attach 'CAN receive-complete' interrupt handler
- can1.filter(CAN_ID<<21, 0xFFE00004, CANStandard, 0); //set up can filter
- can2.frequency(1000000); // set bit rate to 1Mbps
- can2.attach(&rxISR2); // attach 'CAN receive-complete' interrupt handler
- can2.filter(CAN_ID<<21, 0xFFE00004, CANStandard, 0); //set up can filter
+ // after reading, save into spi_command
+ // should probably check checksum first!
+ uint32_t calc_checksum = xor_checksum((uint32_t*)rx_buff,32);
+ for(int i = 0; i < CMD_LEN; i++)
+ {
+ ((uint16_t*)(&spi_command))[i] = rx_buff[i];
+ }
- printf("\n\r Master\n\r");
- //printf("%d\n\r", RX_ID << 18);
- abad1.len = 8; //transmit 8 bytes
- abad2.len = 8; //transmit 8 bytes
- hip1.len = 8;
- hip2.len = 8;
- knee1.len = 8;
- knee2.len = 8;
- rxMsg1.len = 6; //receive 5 bytes
- rxMsg2.len = 6; //receive 5 bytes
+ // run control, which fills in tx_buff for the next iteration
+ if(calc_checksum != spi_command.checksum){
+ spi_data.flags[1] = 0xdead;}
+
+ //test_control();
+ //spi_data.q_abad[0] = 12.0f;
+ control();
+ PackAll();
+ WriteAll();
- abad1.id = 0x1;
- abad2.id = 0x1;
- hip1.id = 0x2;
- hip2.id = 0x2;
- knee1.id = 0x3;
- knee2.id = 0x3;
- pack_cmd(&abad1, 0, 0, 0, 0, 0); //Start out by sending all 0's
- pack_cmd(&abad2, 0, 0, 0, 0, 0);
- pack_cmd(&hip1, 0, 0, 0, 0, 0);
- pack_cmd(&hip2, 0, 0, 0, 0, 0);
- pack_cmd(&knee1, 0, 0, 0, 0, 0);
- pack_cmd(&knee2, 0, 0, 0, 0, 0);
- //WriteAll();
+ //for (int i = 0; i<TX_LEN; i++) {
+ // tx_buff[i] = 2*rx_buff[i];
+ //}
+// for (int i=0; i<TX_LEN; i++) {
+// //printf("%d ", rx_buff[i]);
+// }
+ //printf("\n\r");
+}
+
+int softstop_joint(joint_state state, joint_control * control, float limit_p, float limit_n){
+ if((state.p)>=limit_p){
+ //control->p_des = limit_p;
+ control->v_des = 0.0f;
+ control->kp = 0;
+ control->kd = KD_SOFTSTOP;
+ control->t_ff += KP_SOFTSTOP*(limit_p - state.p);
+ return 1;
+ }
+ else if((state.p)<=limit_n){
+ //control->p_des = limit_n;
+ control->v_des = 0.0f;
+ control->kp = 0;
+ control->kd = KD_SOFTSTOP;
+ control->t_ff += KP_SOFTSTOP*(limit_n - state.p);
+ return 1;
+ }
+ return 0;
+
+ }
+
+
+void control()
+{
+
+ if(((spi_command.flags[0]&0x1)==1) && (enabled==0)){
+ enabled = 1;
+ EnterMotorMode(&a1_can);
+ can1.write(a1_can);
+ EnterMotorMode(&a2_can);
+ can2.write(a2_can);
+ EnterMotorMode(&k1_can);
+ can1.write(k1_can);
+ EnterMotorMode(&k2_can);
+ can2.write(k2_can);
+ EnterMotorMode(&h1_can);
+ can1.write(h1_can);
+ EnterMotorMode(&h2_can);
+ can2.write(h2_can);
+ printf("e\n\r");
+ return;
+ }
+ else if((((spi_command.flags[0]&0x1))==0) && (enabled==1)){
+ enabled = 0;
+ ExitMotorMode(&a1_can);
+ can1.write(a1_can);
+ ExitMotorMode(&a2_can);
+ can2.write(a2_can);
+ ExitMotorMode(&h1_can);
+ can1.write(h1_can);
+ ExitMotorMode(&h2_can);
+ can2.write(h2_can);
+ ExitMotorMode(&k1_can);
+ can1.write(k1_can);
+ ExitMotorMode(&k2_can);
+ can2.write(k2_can);
+ printf("x\n\r");
+ return;
+ }
+
+ spi_data.q_abad[0] = l1_state.a.p;
+ spi_data.q_hip[0] = l1_state.h.p;
+ spi_data.q_knee[0] = l1_state.k.p;
+ spi_data.qd_abad[0] = l1_state.a.v;
+ spi_data.qd_hip[0] = l1_state.h.v;
+ spi_data.qd_knee[0] = l1_state.k.v;
+
+ spi_data.q_abad[1] = l2_state.a.p;
+ spi_data.q_hip[1] = l2_state.h.p;
+ spi_data.q_knee[1] = l2_state.k.p;
+ spi_data.qd_abad[1] = l2_state.a.v;
+ spi_data.qd_hip[1] = l2_state.h.v;
+ spi_data.qd_knee[1] = l2_state.k.v;
+
+
+
+ if(estop==0){
+ //printf("estopped!!!!\n\r");
+ memset(&l1_control, 0, sizeof(l1_control));
+ memset(&l2_control, 0, sizeof(l2_control));
+ spi_data.flags[0] = 0xdead;
+ spi_data.flags[1] = 0xdead;
+ led = 1;
+ }
- wait(.5);
- EnterMotorMode(&abad1);
- EnterMotorMode(&abad2);
- EnterMotorMode(&hip1);
- EnterMotorMode(&hip2);
- EnterMotorMode(&knee1);
- EnterMotorMode(&knee2);
- Zero(&knee2);
- Zero(&knee1);
- Zero(&hip1);
- Zero(&hip2);
- Zero(&abad2);
- Zero(&abad1);
+ else{
+ led = 0;
+
+ memset(&l1_control, 0, sizeof(l1_control));
+ memset(&l2_control, 0, sizeof(l2_control));
+
+ l1_control.a.p_des = spi_command.q_des_abad[0];
+ l1_control.a.v_des = spi_command.qd_des_abad[0];
+ l1_control.a.kp = spi_command.kp_abad[0];
+ l1_control.a.kd = spi_command.kd_abad[0];
+ l1_control.a.t_ff = spi_command.tau_abad_ff[0];
+
+ l1_control.h.p_des = spi_command.q_des_hip[0];
+ l1_control.h.v_des = spi_command.qd_des_hip[0];
+ l1_control.h.kp = spi_command.kp_hip[0];
+ l1_control.h.kd = spi_command.kd_hip[0];
+ l1_control.h.t_ff = spi_command.tau_hip_ff[0];
+
+ l1_control.k.p_des = spi_command.q_des_knee[0];
+ l1_control.k.v_des = spi_command.qd_des_knee[0];
+ l1_control.k.kp = spi_command.kp_knee[0];
+ l1_control.k.kd = spi_command.kd_knee[0];
+ l1_control.k.t_ff = spi_command.tau_knee_ff[0];
+
+ l2_control.a.p_des = spi_command.q_des_abad[1];
+ l2_control.a.v_des = spi_command.qd_des_abad[1];
+ l2_control.a.kp = spi_command.kp_abad[1];
+ l2_control.a.kd = spi_command.kd_abad[1];
+ l2_control.a.t_ff = spi_command.tau_abad_ff[1];
+
+ l2_control.h.p_des = spi_command.q_des_hip[1];
+ l2_control.h.v_des = spi_command.qd_des_hip[1];
+ l2_control.h.kp = spi_command.kp_hip[1];
+ l2_control.h.kd = spi_command.kd_hip[1];
+ l2_control.h.t_ff = spi_command.tau_hip_ff[1];
+
+ l2_control.k.p_des = spi_command.q_des_knee[1];
+ l2_control.k.v_des = spi_command.qd_des_knee[1];
+ l2_control.k.kp = spi_command.kp_knee[1];
+ l2_control.k.kd = spi_command.kd_knee[1];
+ l2_control.k.t_ff = spi_command.tau_knee_ff[1];
+
+
+ spi_data.flags[0] = 0;
+ spi_data.flags[1] = 0;
+ spi_data.flags[0] |= softstop_joint(l1_state.a, &l1_control.a, A_LIM_P, A_LIM_N);
+ spi_data.flags[0] |= (softstop_joint(l1_state.h, &l1_control.h, H_LIM_P, H_LIM_N))<<1;
+ //spi_data.flags[0] |= (softstop_joint(l1_state.k, &l1_control.k, K_LIM_P, K_LIM_N))<<2;
+ spi_data.flags[1] |= softstop_joint(l2_state.a, &l2_control.a, A_LIM_P, A_LIM_N);
+ spi_data.flags[1] |= (softstop_joint(l2_state.h, &l2_control.h, H_LIM_P, H_LIM_N))<<1;
+ //spi_data.flags[1] |= (softstop_joint(l2_state.k, &l2_control.k, K_LIM_P, K_LIM_N))<<2;
+
+ //spi_data.flags[0] = 0xbeef;
+ //spi_data.flags[1] = 0xbeef;
+ //PackAll();
+ //WriteAll();
+ }
+ spi_data.checksum = xor_checksum((uint32_t*)&spi_data,14);
+ for(int i = 0; i < DATA_LEN; i++){
+ tx_buff[i] = ((uint16_t*)(&spi_data))[i];}
+
+}
+
+
+void test_control()
+{
+ for(int i = 0; i < 2; i++)
+ {
+ spi_data.q_abad[i] = spi_command.q_des_abad[i] + 1.f;
+ spi_data.q_knee[i] = spi_command.q_des_knee[i] + 1.f;
+ spi_data.q_hip[i] = spi_command.q_des_hip[i] + 1.f;
+
+ spi_data.qd_abad[i] = spi_command.qd_des_abad[i] + 1.f;
+ spi_data.qd_knee[i] = spi_command.qd_des_knee[i] + 1.f;
+ spi_data.qd_hip[i] = spi_command.qd_des_hip[i] + 1.f;
+ }
+
+ spi_data.flags[0] = 0xdead;
+ //spi_data.flags[1] = 0xbeef;
+
+ // only do first 56 bytes of message.
+ spi_data.checksum = xor_checksum((uint32_t*)&spi_data,14);
+
+ for(int i = 0; i < DATA_LEN; i++)
+ tx_buff[i] = ((uint16_t*)(&spi_data))[i];
+}
+
+void init_spi(void){
+ SPISlave *spi = new SPISlave(PA_7, PA_6, PA_5, PA_4);
+ spi->format(16, 0);
+ spi->frequency(12000000);
+ spi->reply(0x0);
+ cs.fall(&spi_isr);
+ printf("done\n\r");
+}
+
+
+int main() {
+ //wait(.5);
+ //led = 1;
+ pc.baud(921600);
+ pc.attach(&serial_isr);
+ estop.mode(PullUp);
+ //spi.format(16, 0);
+ //spi.frequency(1000000);
+ //spi.reply(0x0);
+ //cs.fall(&spi_isr);
+
+ can1.frequency(1000000); // set bit rate to 1Mbps
+ //can1.attach(&rxISR1); // attach 'CAN receive-complete' interrupt handler
+ can1.filter(CAN_ID<<21, 0xFFE00004, CANStandard, 0); //set up can filter
+ can2.frequency(1000000); // set bit rate to 1Mbps
+ //can2.attach(&rxISR2); // attach 'CAN receive-complete' interrupt handler
+ can2.filter(CAN_ID<<21, 0xFFE00004, CANStandard, 0); //set up can filter
+
+ memset(&tx_buff, 0, TX_LEN * sizeof(uint16_t));
+ memset(&spi_data, 0, sizeof(spi_data_t));
+ memset(&spi_command,0,sizeof(spi_command_t));
+
+
+ NVIC_SetPriority(TIM5_IRQn, 1);
+ //NVIC_SetPriority(CAN1_RX0_IRQn, 3);
+ //NVIC_SetPriority(CAN2_RX0_IRQn, 3);
+
+ printf("\n\r SPIne\n\r");
+ //printf("%d\n\r", RX_ID << 18);
+
+ a1_can.len = 8; //transmit 8 bytes
+ a2_can.len = 8; //transmit 8 bytes
+ h1_can.len = 8;
+ h2_can.len = 8;
+ k1_can.len = 8;
+ k2_can.len = 8;
+ rxMsg1.len = 6; //receive 6 bytes
+ rxMsg2.len = 6; //receive 6 bytes
+
+ a1_can.id = 0x1;
+ a2_can.id = 0x1;
+ h1_can.id = 0x2;
+ h2_can.id = 0x2;
+ k1_can.id = 0x3;
+ k2_can.id = 0x3;
+
+ pack_cmd(&a1_can, l1_control.a);
+ pack_cmd(&a2_can, l2_control.a);
+ pack_cmd(&h1_can, l1_control.h);
+ pack_cmd(&h2_can, l2_control.h);
+ pack_cmd(&k1_can, l1_control.k);
+ pack_cmd(&k2_can, l2_control.k);
+ WriteAll();
+ // SPI doesn't work if enabled while the CS pin is pulled low
+ // Wait for CS to not be low, then enable SPI
+ if(!spi_enabled){
+ while((spi_enabled==0) && (cs.read() ==0)){wait_us(10);}
+ init_spi();
+ spi_enabled = 1;
+ }
+
+ while(1) {
+ counter++;
+ can2.read(rxMsg2);
+ unpack_reply(rxMsg2, &l2_state);
+ can1.read(rxMsg1); // read message into Rx message storage
+ unpack_reply(rxMsg1, &l1_state);
+ wait_us(10);
- wait(.5);
- enabled = 1;
- loop.attach(&sendCMD, .001);
- while(1) {
+ }
- }
+
}