SparkFun Line Follower Array Library. based on https://github.com/sparkfun/SparkFun_Line_Follower_Array_Arduino_Library
Dependents: WRS_mechanamu_test
Diff: SensorBar.h
- Revision:
- 0:c1d649c7b904
- Child:
- 1:3a86ce26147b
diff -r 000000000000 -r c1d649c7b904 SensorBar.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SensorBar.h Fri Aug 31 02:52:24 2018 +0000 @@ -0,0 +1,96 @@ +#ifndef SENSORBAR_H +#define SENSORBAR_H + +#include "mbed.h" +#include "stdint.h" + +#define RECEIVE_TIMEOUT_VALUE 1000 // Timeout for I2C receive + +// These are used for setting LED driver to linear or log mode: +#define LINEAR 0 +#define LOGARITHMIC 1 + +// These are used for clock config: +#define INTERNAL_CLOCK 2 +#define EXTERNAL_CLOCK 1 + +class SensorBar +{ + public: + //New functions for bar specific operation + SensorBar(I2C *i2c, uint8_t address, uint8_t resetPin = 255, uint8_t interruptPin = 255, uint8_t oscillatorPin = 255 ); + uint8_t begin( void ); + uint8_t getRaw( void ); + int8_t getPosition( void ); + uint8_t getDensity( void ); + void setBarStrobe( void ); + void clearBarStrobe( void ); + void setInvertBits( void ); //Dark (no reflection) = 1, position returns center of dark + void clearInvertBits( void ); //Light (reflection) = 1, position returns center of light + + //Functions pulled from the SX1509 driver + void reset( void ); + void debounceConfig( uint8_t configValue ); + void debounceEnable( uint8_t pin ); + void enableInterrupt( uint8_t pin, uint8_t riseFall ); + unsigned int interruptSource( void ); + void configClock( uint8_t oscSource = 2, uint8_t oscPinFunction = 0, uint8_t oscFreqOut = 0, uint8_t oscDivider = 1 ); + + + private: + //Holding variables + uint8_t lastBarRawValue; + uint8_t lastBarPositionValue; + + //Settings + uint8_t deviceAddress; // I2C Address of SX1509 + uint8_t barStrobe; // 0 = always on, 1 = power saving by IR LED strobe + uint8_t invertBits; // 1 = invert + + // Pin definitions: + uint8_t pinInterrupt; + uint8_t pinOscillator; + uint8_t pinReset; + + // Read Functions: + void scan( void ); + uint8_t readByte(uint8_t registerAddress); + unsigned int readWord(uint8_t registerAddress); + void readBytes(uint8_t firstRegisterAddress, char * destination, uint8_t length); + // Write functions: + void writeByte(uint8_t registerAddress, uint8_t writeValue); + void writeWord(uint8_t registerAddress, unsigned int writeValue); + void writeBytes(uint8_t firstRegisterAddress, uint8_t * writeArray, uint8_t length); + + I2C *_i2c; +}; + +//****************************************************************************// +// +// Circular Buffer +// +//****************************************************************************// + +//Class CircularBuffer is int16_t +//Does not care about over-running real data ( if request is outside length's bounds ). +//For example, the underlying machine writes [48], [49], [0], [1] ... + +namespace name +{ +class CircularBuffer +{ +public: + CircularBuffer( uint16_t inputSize ); + ~CircularBuffer(); + int16_t getElement( uint16_t ); //zero is the push location + void pushElement( int16_t ); + int16_t averageLast( uint16_t ); + uint16_t recordLength( void ); +private: + uint16_t cBufferSize; + int16_t *cBufferData; + int16_t cBufferLastPtr; + uint8_t cBufferElementsUsed; +}; +} +#endif // SENSORBAR_H