Sergey Solodunov
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
mbed official
Diff: targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAML21J18A/SAML21_XPLAINED_PRO/saml21_xplained_pro.h
- Revision:
- 18:da299f395b9e
diff -r 0b20abc991ca -r da299f395b9e targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAML21J18A/SAML21_XPLAINED_PRO/saml21_xplained_pro.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAML21J18A/SAML21_XPLAINED_PRO/saml21_xplained_pro.h Mon Nov 09 13:30:11 2015 +0000
@@ -0,0 +1,599 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board definition
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef SAML21_XPLAINED_PRO_H_INCLUDED
+#define SAML21_XPLAINED_PRO_H_INCLUDED
+
+#include <conf_board.h>
+#include <compiler.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup group_common_boards
+ * \defgroup saml21_xplained_pro_group SAM L21 Xplained Pro board
+ *
+ * @{
+ */
+
+void system_board_init(void);
+
+/**
+ * \defgroup saml21_xplained_pro_features_group Features
+ *
+ * Symbols that describe features and capabilities of the board.
+ *
+ * @{
+ */
+
+/** Name string macro */
+#define BOARD_NAME "SAML21_XPLAINED_PRO"
+
+/** \name Resonator definitions
+ * @{ */
+#define BOARD_FREQ_SLCK_XTAL (32768U)
+#define BOARD_FREQ_SLCK_BYPASS (32768U)
+#define BOARD_FREQ_MAINCK_XTAL 0 /* Not Mounted */
+#define BOARD_FREQ_MAINCK_BYPASS 0 /* Not Mounted */
+#define BOARD_MCK CHIP_FREQ_CPU_MAX
+#define BOARD_OSC_STARTUP_US 15625
+/** @} */
+
+/** \name LED0 definitions
+ * @{ */
+#define LED0_PIN PIN_PB10
+#define LED0_ACTIVE false
+#define LED0_INACTIVE !LED0_ACTIVE
+/** @} */
+
+/** \name SW0 definitions
+ * @{ */
+#define SW0_PIN PIN_PA02
+#define SW0_ACTIVE false
+#define SW0_INACTIVE !SW0_ACTIVE
+#define SW0_EIC_PIN PIN_PA02A_EIC_EXTINT2
+#define SW0_EIC_MUX MUX_PA02A_EIC_EXTINT2
+#define SW0_EIC_PINMUX PINMUX_PA02A_EIC_EXTINT2
+#define SW0_EIC_LINE 2
+/** @} */
+
+/**
+ * \name LED #0 definitions
+ *
+ * Wrapper macros for LED0, to ensure common naming across all Xplained Pro
+ * boards.
+ *
+ * @{ */
+#define LED_0_NAME "LED0 (yellow)"
+#define LED_0_PIN LED0_PIN
+#define LED_0_ACTIVE LED0_ACTIVE
+#define LED_0_INACTIVE LED0_INACTIVE
+#define LED0_GPIO LED0_PIN
+#define LED0 LED0_PIN
+
+#define LED_0_PWM4CTRL_MODULE TCC0
+#define LED_0_PWM4CTRL_CHANNEL 0
+#define LED_0_PWM4CTRL_OUTPUT 0
+#define LED_0_PWM4CTRL_PIN PIN_PB10F_TCC0_WO4
+#define LED_0_PWM4CTRL_MUX MUX_PB10F_TCC0_WO4
+#define LED_0_PWM4CTRL_PINMUX PINMUX_PB10F_TCC0_WO4
+/** @} */
+
+/** Number of on-board LEDs */
+#define LED_COUNT 1
+
+
+/**
+ * \name Button #0 definitions
+ *
+ * Wrapper macros for SW0, to ensure common naming across all Xplained Pro
+ * boards.
+ *
+ * @{ */
+#define BUTTON_0_NAME "SW0"
+#define BUTTON_0_PIN SW0_PIN
+#define BUTTON_0_ACTIVE SW0_ACTIVE
+#define BUTTON_0_INACTIVE SW0_INACTIVE
+#define BUTTON_0_EIC_PIN SW0_EIC_PIN
+#define BUTTON_0_EIC_MUX SW0_EIC_MUX
+#define BUTTON_0_EIC_PINMUX SW0_EIC_PINMUX
+#define BUTTON_0_EIC_LINE SW0_EIC_LINE
+/** @} */
+
+/** Number of on-board buttons */
+#define BUTTON_COUNT 1
+
+/** \name Extension header #1 pin definitions
+ * @{
+ */
+#define EXT1_PIN_3 PIN_PB05
+#define EXT1_PIN_4 PIN_PA03
+#define EXT1_PIN_5 PIN_PB06
+#define EXT1_PIN_6 PIN_PB07
+#define EXT1_PIN_7 PIN_PA12
+#define EXT1_PIN_8 PIN_PA13
+#define EXT1_PIN_9 PIN_PB04
+#define EXT1_PIN_10 PIN_PA02
+#define EXT1_PIN_11 PIN_PA08
+#define EXT1_PIN_12 PIN_PA09
+#define EXT1_PIN_13 PIN_PB09
+#define EXT1_PIN_14 PIN_PB08
+#define EXT1_PIN_15 PIN_PA05
+#define EXT1_PIN_16 PIN_PA06
+#define EXT1_PIN_17 PIN_PA04
+#define EXT1_PIN_18 PIN_PA07
+/** @} */
+
+/** \name Extension header #1 pin definitions by function
+ * @{
+ */
+#define EXT1_PIN_ADC_0 EXT1_PIN_3
+#define EXT1_PIN_ADC_1 EXT1_PIN_4
+#define EXT1_PIN_GPIO_0 EXT1_PIN_5
+#define EXT1_PIN_GPIO_1 EXT1_PIN_6
+#define EXT1_PIN_PWM_0 EXT1_PIN_7
+#define EXT1_PIN_PWM_1 EXT1_PIN_8
+#define EXT1_PIN_IRQ EXT1_PIN_9
+#define EXT1_PIN_I2C_SDA EXT1_PIN_11
+#define EXT1_PIN_I2C_SCL EXT1_PIN_12
+#define EXT1_PIN_UART_RX EXT1_PIN_13
+#define EXT1_PIN_UART_TX EXT1_PIN_14
+#define EXT1_PIN_SPI_SS_1 EXT1_PIN_10
+#define EXT1_PIN_SPI_SS_0 EXT1_PIN_15
+#define EXT1_PIN_SPI_MOSI EXT1_PIN_16
+#define EXT1_PIN_SPI_MISO EXT1_PIN_17
+#define EXT1_PIN_SPI_SCK EXT1_PIN_18
+/** @} */
+
+/** \name Extension header #1 ADC definitions
+ * @{
+ */
+#define EXT1_ADC_MODULE ADC
+#define EXT1_ADC_13_CHANNEL 13
+#define EXT1_ADC_13_PIN PIN_PB05B_ADC_AIN13
+#define EXT1_ADC_13_MUX MUX_PB05B_ADC_AIN13
+#define EXT1_ADC_13_PINMUX PINMUX_PB05B_ADC_AIN13
+#define EXT1_ADC_1_CHANNEL 1
+#define EXT1_ADC_1_PIN PIN_PA03B_ADC_AIN1
+#define EXT1_ADC_1_MUX MUX_PA03B_ADC_AIN1
+#define EXT1_ADC_1_PINMUX PINMUX_PA03B_ADC_AIN1
+/** @} */
+
+/** \name Extension header #1 PWM definitions
+ * @{
+ */
+#define EXT1_PWM_MODULE TC2
+#define EXT1_PWM_0_CHANNEL 0
+#define EXT1_PWM_0_PIN PIN_PB02E_TC2_WO0
+#define EXT1_PWM_0_MUX MUX_PB02E_TC2_WO0
+#define EXT1_PWM_0_PINMUX PINMUX_PB02E_TC2_WO0
+#define EXT1_PWM_1_CHANNEL 1
+#define EXT1_PWM_1_PIN PIN_PB03E_TC2_WO1
+#define EXT1_PWM_1_MUX MUX_PB03E_TC2_WO1
+#define EXT1_PWM_1_PINMUX PINMUX_PB03E_TC2_WO1
+/** @} */
+
+/** \name Extension header #1 IRQ/External interrupt definitions
+ * @{
+ */
+#define EXT1_IRQ_MODULE EIC
+#define EXT1_IRQ_INPUT 4
+#define EXT1_IRQ_PIN PIN_PB04A_EIC_EXTINT4
+#define EXT1_IRQ_MUX MUX_PB04A_EIC_EXTINT4
+#define EXT1_IRQ_PINMUX PINMUX_PB04A_EIC_EXTINT4
+/** @} */
+
+/** \name Extension header #1 I2C definitions
+ * @{
+ */
+#define EXT1_I2C_MODULE SERCOM2
+#define EXT1_I2C_SERCOM_PINMUX_PAD0 PINMUX_PA08D_SERCOM2_PAD0
+#define EXT1_I2C_SERCOM_PINMUX_PAD1 PINMUX_PA09D_SERCOM2_PAD1
+#define EXT1_I2C_SERCOM_DMAC_ID_TX SERCOM2_DMAC_ID_TX
+#define EXT1_I2C_SERCOM_DMAC_ID_RX SERCOM2_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #1 UART definitions
+ * @{
+ */
+#define EXT1_UART_MODULE SERCOM4
+#define EXT1_UART_SERCOM_MUX_SETTING USART_RX_1_TX_0_XCK_1
+#define EXT1_UART_SERCOM_PINMUX_PAD0 PINMUX_PB08D_SERCOM4_PAD0
+#define EXT1_UART_SERCOM_PINMUX_PAD1 PINMUX_PB09D_SERCOM4_PAD1
+#define EXT1_UART_SERCOM_PINMUX_PAD2 PINMUX_UNUSED
+#define EXT1_UART_SERCOM_PINMUX_PAD3 PINMUX_UNUSED
+#define EXT1_UART_SERCOM_DMAC_ID_TX SERCOM4_DMAC_ID_TX
+#define EXT1_UART_SERCOM_DMAC_ID_RX SERCOM4_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #1 SPI definitions
+ * @{
+ */
+#define EXT1_SPI_MODULE SERCOM0
+#define EXT1_SPI_SERCOM_MUX_SETTING SPI_SIGNAL_MUX_SETTING_E
+#define EXT1_SPI_SERCOM_PINMUX_PAD0 PINMUX_PA04D_SERCOM0_PAD0
+#define EXT1_SPI_SERCOM_PINMUX_PAD1 PINMUX_PA05D_SERCOM0_PAD1
+#define EXT1_SPI_SERCOM_PINMUX_PAD2 PINMUX_PA06D_SERCOM0_PAD2
+#define EXT1_SPI_SERCOM_PINMUX_PAD3 PINMUX_PA07D_SERCOM0_PAD3
+#define EXT1_SPI_SERCOM_DMAC_ID_TX SERCOM0_DMAC_ID_TX
+#define EXT1_SPI_SERCOM_DMAC_ID_RX SERCOM0_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #2 pin definitions
+ * @{
+ */
+#define EXT2_PIN_3 PIN_PA10
+#define EXT2_PIN_4 PIN_PA11
+#define EXT2_PIN_5 PIN_PA20
+#define EXT2_PIN_6 PIN_PA21
+#define EXT2_PIN_7 PIN_PB12
+#define EXT2_PIN_8 PIN_PB13
+#define EXT2_PIN_9 PIN_PB14
+#define EXT2_PIN_10 PIN_PB15
+#define EXT2_PIN_11 PIN_PA08
+#define EXT2_PIN_12 PIN_PA09
+#define EXT2_PIN_13 PIN_PA19
+#define EXT2_PIN_14 PIN_PA18
+#define EXT2_PIN_15 PIN_PA17
+#define EXT2_PIN_16 PIN_PB22
+#define EXT2_PIN_17 PIN_PB16
+#define EXT2_PIN_18 PIN_PB23
+/** @} */
+
+/** \name Extension header #2 pin definitions by function
+ * @{
+ */
+#define EXT2_PIN_ADC_0 EXT2_PIN_3
+#define EXT2_PIN_ADC_1 EXT2_PIN_4
+#define EXT2_PIN_GPIO_0 EXT2_PIN_5
+#define EXT2_PIN_GPIO_1 EXT2_PIN_6
+#define EXT2_PIN_PWM_0 EXT2_PIN_7
+#define EXT2_PIN_PWM_1 EXT2_PIN_8
+#define EXT2_PIN_IRQ EXT2_PIN_9
+#define EXT2_PIN_I2C_SDA EXT2_PIN_11
+#define EXT2_PIN_I2C_SCL EXT2_PIN_12
+#define EXT2_PIN_UART_RX EXT2_PIN_13
+#define EXT2_PIN_UART_TX EXT2_PIN_14
+#define EXT2_PIN_SPI_SS_1 EXT2_PIN_10
+#define EXT2_PIN_SPI_SS_0 EXT2_PIN_15
+#define EXT2_PIN_SPI_MOSI EXT2_PIN_16
+#define EXT2_PIN_SPI_MISO EXT2_PIN_17
+#define EXT2_PIN_SPI_SCK EXT2_PIN_18
+/** @} */
+
+/** \name Extension header #2 ADC definitions
+ * @{
+ */
+#define EXT2_ADC_MODULE ADC
+#define EXT2_ADC_0_CHANNEL 18
+#define EXT2_ADC_0_PIN PIN_PA10B_ADC_AIN18
+#define EXT2_ADC_0_MUX MUX_PA10B_ADC_AIN18
+#define EXT2_ADC_0_PINMUX PINMUX_PA10B_ADC_AIN18
+#define EXT2_ADC_1_CHANNEL 19
+#define EXT2_ADC_1_PIN PIN_PA11B_ADC_AIN19
+#define EXT2_ADC_1_MUX MUX_PA11B_ADC_AIN19
+#define EXT2_ADC_1_PINMUX PINMUX_PA11B_ADC_AIN19
+/** @} */
+
+/** \name Extension header #2 PWM definitions
+ * @{
+ */
+#define EXT2_PWM_MODULE TC0
+#define EXT2_PWM_0_CHANNEL 0
+#define EXT2_PWM_0_PIN PIN_PB12E_TC0_WO0
+#define EXT2_PWM_0_MUX MUX_PB12E_TC0_WO0
+#define EXT2_PWM_0_PINMUX PINMUX_PB12E_TC0_WO0
+#define EXT2_PWM_1_CHANNEL 1
+#define EXT2_PWM_1_PIN PIN_PB13E_TC0_WO1
+#define EXT2_PWM_1_MUX MUX_PB13E_TC0_WO1
+#define EXT2_PWM_1_PINMUX PINMUX_PB13E_TC0_WO1
+/** @} */
+
+/** \name Extension header #2 IRQ/External interrupt definitions
+ * @{
+ */
+#define EXT2_IRQ_MODULE EIC
+#define EXT2_IRQ_INPUT 14
+#define EXT2_IRQ_PIN PIN_PB14A_EIC_EXTINT14
+#define EXT2_IRQ_MUX MUX_PB14A_EIC_EXTINT14
+#define EXT2_IRQ_PINMUX PINMUX_PB14A_EIC_EXTINT14
+/** @} */
+
+/** \name Extension header #2 I2C definitions
+* @{
+*/
+#define EXT2_I2C_MODULE SERCOM2
+#define EXT2_I2C_SERCOM_PINMUX_PAD0 PINMUX_PA08D_SERCOM2_PAD0
+#define EXT2_I2C_SERCOM_PINMUX_PAD1 PINMUX_PA09D_SERCOM2_PAD1
+#define EXT2_I2C_SERCOM_DMAC_ID_TX SERCOM2_DMAC_ID_TX
+#define EXT2_I2C_SERCOM_DMAC_ID_RX SERCOM2_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #2 UART definitions
+ * @{
+ */
+#define EXT2_UART_MODULE SERCOM1
+#define EXT2_UART_SERCOM_MUX_SETTING USART_RX_3_TX_2_XCK_3
+#define EXT2_UART_SERCOM_PINMUX_PAD0 PINMUX_UNUSED
+#define EXT2_UART_SERCOM_PINMUX_PAD1 PINMUX_UNUSED
+#define EXT2_UART_SERCOM_PINMUX_PAD2 PINMUX_PA18C_SERCOM1_PAD2
+#define EXT2_UART_SERCOM_PINMUX_PAD3 PINMUX_PA19C_SERCOM1_PAD3
+#define EXT2_UART_SERCOM_DMAC_ID_TX SERCOM1_DMAC_ID_TX
+#define EXT2_UART_SERCOM_DMAC_ID_RX SERCOM1_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #2 SPI definitions
+ * @{
+ */
+#define EXT2_SPI_MODULE SERCOM5
+#define EXT2_SPI_SERCOM_MUX_SETTING SPI_SIGNAL_MUX_SETTING_E
+#define EXT2_SPI_SERCOM_PINMUX_PAD0 PINMUX_PB16C_SERCOM5_PAD0
+#define EXT2_SPI_SERCOM_PINMUX_PAD1 PINMUX_UNUSED
+#define EXT2_SPI_SERCOM_PINMUX_PAD2 PINMUX_PB22D_SERCOM5_PAD2
+#define EXT2_SPI_SERCOM_PINMUX_PAD3 PINMUX_PB23D_SERCOM5_PAD3
+#define EXT2_SPI_SERCOM_DMAC_ID_TX SERCOM5_DMAC_ID_TX
+#define EXT2_SPI_SERCOM_DMAC_ID_RX SERCOM5_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #3 pin definitions
+ * @{
+ */
+#define EXT3_PIN_3 PIN_PB00
+#define EXT3_PIN_4 PIN_PB01
+#define EXT3_PIN_5 PIN_PB30
+#define EXT3_PIN_6 PIN_PA15
+#define EXT3_PIN_7 PIN_PB10
+#define EXT3_PIN_8 PIN_PB11
+#define EXT3_PIN_9 PIN_PA16
+#define EXT3_PIN_10 PIN_PA27
+#define EXT3_PIN_11 PIN_PA08
+#define EXT3_PIN_12 PIN_PA09
+#define EXT3_PIN_13 PIN_PA19
+#define EXT3_PIN_14 PIN_PA18
+#define EXT3_PIN_15 PIN_PB17
+#define EXT3_PIN_16 PIN_PB22
+#define EXT3_PIN_17 PIN_PB16
+#define EXT3_PIN_18 PIN_PB23
+/** @} */
+
+/** \name Extension header #3 pin definitions by function
+ * @{
+ */
+#define EXT3_PIN_ADC_0 EXT3_PIN_3
+#define EXT3_PIN_ADC_1 EXT3_PIN_4
+#define EXT3_PIN_GPIO_0 EXT3_PIN_5
+#define EXT3_PIN_GPIO_1 EXT3_PIN_6
+#define EXT3_PIN_PWM_0 EXT3_PIN_7
+#define EXT3_PIN_PWM_1 EXT3_PIN_8
+#define EXT3_PIN_IRQ EXT3_PIN_9
+#define EXT3_PIN_I2C_SDA EXT3_PIN_11
+#define EXT3_PIN_I2C_SCL EXT3_PIN_12
+#define EXT3_PIN_UART_RX EXT3_PIN_13
+#define EXT3_PIN_UART_TX EXT3_PIN_14
+#define EXT3_PIN_SPI_SS_1 EXT3_PIN_10
+#define EXT3_PIN_SPI_SS_0 EXT3_PIN_15
+#define EXT3_PIN_SPI_MOSI EXT3_PIN_16
+#define EXT3_PIN_SPI_MISO EXT3_PIN_17
+#define EXT3_PIN_SPI_SCK EXT3_PIN_18
+/** @} */
+
+/** \name Extension header #3 ADC definitions
+ * @{
+ */
+#define EXT3_ADC_MODULE ADC
+#define EXT3_ADC_0_CHANNEL 8
+#define EXT3_ADC_0_PIN PIN_PB00B_ADC_AIN8
+#define EXT3_ADC_0_MUX MUX_PB00B_ADC_AIN8
+#define EXT3_ADC_0_PINMUX PINMUX_PB00B_ADC_AIN8
+#define EXT3_ADC_1_CHANNEL 9
+#define EXT3_ADC_1_PIN PIN_PB01B_ADC_AIN9
+#define EXT3_ADC_1_MUX MUX_PB01B_ADC_AIN9
+#define EXT3_ADC_1_PINMUX PINMUX_PB01B_ADC_AIN9
+/** @} */
+
+/** \name Extension header #3 IRQ/External interrupt definitions
+ * @{
+ */
+#define EXT3_IRQ_MODULE EIC
+#define EXT3_IRQ_INPUT 0
+#define EXT3_IRQ_PIN PIN_PA16A_EIC_EXTINT0
+#define EXT3_IRQ_MUX MUX_PA16A_EIC_EXTINT0
+#define EXT3_IRQ_PINMUX PINMUX_PA16A_EIC_EXTINT0
+/** @} */
+
+/** \name Extension header #3 I2C definitions
+ * @{
+ */
+#define EXT3_I2C_MODULE SERCOM2
+#define EXT3_I2C_SERCOM_PINMUX_PAD0 PINMUX_PA08D_SERCOM2_PAD0
+#define EXT3_I2C_SERCOM_PINMUX_PAD1 PINMUX_PA09D_SERCOM2_PAD1
+#define EXT3_I2C_SERCOM_DMAC_ID_TX SERCOM2_DMAC_ID_TX
+#define EXT3_I2C_SERCOM_DMAC_ID_RX SERCOM2_DMAC_ID_RX
+/** @} */
+
+/** \name Extension header #3 UART definitions
+ * @{
+ */
+#define EXT3_UART_MODULE SERCOM1
+#define EXT3_UART_SERCOM_MUX_SETTING USART_RX_3_TX_2_XCK_3
+#define EXT3_UART_SERCOM_PINMUX_PAD0 PINMUX_UNUSED
+#define EXT3_UART_SERCOM_PINMUX_PAD1 PINMUX_UNUSED
+#define EXT3_UART_SERCOM_PINMUX_PAD2 PINMUX_PA18C_SERCOM1_PAD2
+#define EXT3_UART_SERCOM_PINMUX_PAD3 PINMUX_PA19C_SERCOM1_PAD3
+#define EXT3_UART_SERCOM_DMAC_ID_TX SERCOM1_DMAC_ID_TX
+#define EXT3_UART_SERCOM_DMAC_ID_RX SERCOM1_DMAC_ID_RX
+
+/** @} */
+
+/** \name Extension header #3 SPI definitions
+ * @{
+ */
+#define EXT3_SPI_MODULE SERCOM5
+#define EXT3_SPI_SERCOM_MUX_SETTING SPI_SIGNAL_MUX_SETTING_E
+#define EXT3_SPI_SERCOM_PINMUX_PAD0 PINMUX_PB16C_SERCOM5_PAD0
+#define EXT3_SPI_SERCOM_PINMUX_PAD1 PINMUX_PB17C_SERCOM5_PAD1
+#define EXT3_SPI_SERCOM_PINMUX_PAD2 PINMUX_PB22D_SERCOM5_PAD2
+#define EXT3_SPI_SERCOM_PINMUX_PAD3 PINMUX_PB23D_SERCOM5_PAD3
+#define EXT3_SPI_SERCOM_DMAC_ID_TX SERCOM5_DMAC_ID_TX
+#define EXT3_SPI_SERCOM_DMAC_ID_RX SERCOM5_DMAC_ID_RX
+/** @} */
+
+/** \name Embedded debugger I2C interface definitions
+ * @{
+ */
+#define EDBG_I2C_MODULE SERCOM2
+#define EDBG_I2C_SERCOM_PINMUX_PAD0 PINMUX_PA08D_SERCOM2_PAD0
+#define EDBG_I2C_SERCOM_PINMUX_PAD1 PINMUX_PA09D_SERCOM2_PAD1
+#define EDBG_I2C_SERCOM_DMAC_ID_TX SERCOM2_DMAC_ID_TX
+#define EDBG_I2C_SERCOM_DMAC_ID_RX SERCOM2_DMAC_ID_RX
+/** @} */
+
+/** \name Embedded debugger SPI interface definitions
+ * @{
+ */
+#define EDBG_SPI_MODULE SERCOM5
+#define EDBG_SPI_SERCOM_MUX_SETTING SPI_SIGNAL_MUX_SETTING_E
+#define EDBG_SPI_SERCOM_PINMUX_PAD0 PINMUX_PB16C_SERCOM5_PAD0
+#define EDBG_SPI_SERCOM_PINMUX_PAD1 PINMUX_PB31D_SERCOM5_PAD1
+#define EDBG_SPI_SERCOM_PINMUX_PAD2 PINMUX_PB22D_SERCOM5_PAD2
+#define EDBG_SPI_SERCOM_PINMUX_PAD3 PINMUX_PB23D_SERCOM5_PAD3
+#define EDBG_SPI_SERCOM_DMAC_ID_TX SERCOM5_DMAC_ID_TX
+#define EDBG_SPI_SERCOM_DMAC_ID_RX SERCOM5_DMAC_ID_RX
+/** @} */
+
+/** \name Embedded debugger CDC Gateway USART interface definitions
+ * @{
+ */
+#define EDBG_CDC_MODULE SERCOM3
+#define EDBG_CDC_SERCOM_MUX_SETTING USART_RX_1_TX_0_XCK_1
+#define EDBG_CDC_SERCOM_PINMUX_PAD0 PINMUX_PA22C_SERCOM3_PAD0
+#define EDBG_CDC_SERCOM_PINMUX_PAD1 PINMUX_PA23C_SERCOM3_PAD1
+#define EDBG_CDC_SERCOM_PINMUX_PAD2 PINMUX_UNUSED
+#define EDBG_CDC_SERCOM_PINMUX_PAD3 PINMUX_UNUSED
+#define EDBG_CDC_SERCOM_DMAC_ID_TX SERCOM3_DMAC_ID_TX
+#define EDBG_CDC_SERCOM_DMAC_ID_RX SERCOM3_DMAC_ID_RX
+/** @} */
+
+/** \name USB definitions
+ * @{
+ */
+#define USB_ID
+#define USB_TARGET_DP_PIN PIN_PA25G_USB_DP
+#define USB_TARGET_DP_MUX MUX_PA25G_USB_DP
+#define USB_TARGET_DP_PINMUX PINMUX_PA25G_USB_DP
+#define USB_TARGET_DM_PIN PIN_PA24G_USB_DM
+#define USB_TARGET_DM_MUX MUX_PA24G_USB_DM
+#define USB_TARGET_DM_PINMUX PINMUX_PA24G_USB_DM
+#define USB_VBUS_PIN PIN_PA14
+#define USB_VBUS_EIC_LINE 14
+#define USB_VBUS_EIC_MUX MUX_PA14A_EIC_EXTINT14
+#define USB_VBUS_EIC_PINMUX PINMUX_PA14A_EIC_EXTINT14
+#define USB_ID_PIN PIN_PB02
+#define USB_ID_EIC_LINE 2
+#define USB_ID_EIC_MUX MUX_PB02A_EIC_EXTINT2
+#define USB_ID_EIC_PINMUX PINMUX_PB02A_EIC_EXTINT2
+/** @} */
+
+/** \name CCL interface definitions
+ * @{
+ */
+#define CCL_LUT0_IN0_MUX MUX_PA04I_CCL_IN0
+#define CCL_LUT0_IN1_MUX MUX_PA05I_CCL_IN1
+#define CCL_LUT0_IN2_MUX MUX_PA06I_CCL_IN2
+#define CCL_LUT0_OUT_MUX MUX_PA07I_CCL_OUT0
+
+#define CCL_LUT0_IN0_PIN PIN_PA04I_CCL_IN0
+#define CCL_LUT0_IN1_PIN PIN_PA05I_CCL_IN1
+#define CCL_LUT0_IN2_PIN PIN_PA06I_CCL_IN2
+#define CCL_LUT0_OUT_PIN PIN_PA07I_CCL_OUT0
+
+#define CCL_LUT1_IN0_MUX MUX_PA08I_CCL_IN3
+#define CCL_LUT1_IN1_MUX MUX_PA09I_CCL_IN4
+#define CCL_LUT1_IN2_MUX MUX_PA10I_CCL_IN5
+#define CCL_LUT1_OUT_MUX MUX_PA11I_CCL_OUT1
+
+#define CCL_LUT1_IN0_PIN PIN_PA08I_CCL_IN3
+#define CCL_LUT1_IN1_PIN PIN_PA09I_CCL_IN4
+#define CCL_LUT1_IN2_PIN PIN_PA10I_CCL_IN5
+#define CCL_LUT1_OUT_PIN PIN_PA11I_CCL_OUT1
+/** @} */
+
+/**
+ * \brief Turns off the specified LEDs.
+ *
+ * \param led_gpio LED to turn off (LEDx_GPIO).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+#define LED_Off(led_gpio) port_pin_set_output_level(led_gpio,true)
+
+/**
+ * \brief Turns on the specified LEDs.
+ *
+ * \param led_gpio LED to turn on (LEDx_GPIO).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+#define LED_On(led_gpio) port_pin_set_output_level(led_gpio,false)
+
+/**
+ * \brief Toggles the specified LEDs.
+ *
+ * \param led_gpio LED to toggle (LEDx_GPIO).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+#define LED_Toggle(led_gpio) port_pin_toggle_output_level(led_gpio)
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SAML21_XPLAINED_PRO_H_INCLUDED */