Diff: targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAMD21J18A/analogout_api.c

Revision:

15:a81a8d6c1dfe

diff -r d797fbdad187 -r a81a8d6c1dfe targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAMD21J18A/analogout_api.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAMD21J18A/analogout_api.c	Wed Nov 04 16:30:11 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed_assert.h"
+#include "analogout_api.h"
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "dac.h"
+
+struct dac_module dac_instance;
+extern uint8_t g_sys_init;
+
+#define MAX_VAL_10BIT 0x03FF
+
+void analogout_init(dac_t *obj, PinName pin)
+{
+    MBED_ASSERT(obj);
+    if (g_sys_init == 0) {
+        system_init();
+        g_sys_init = 1;
+    }
+
+    struct dac_config config_dac;
+    struct dac_chan_config config_dac_chan;
+    uint32_t pos_input;
+    pos_input = pinmap_find_peripheral(pin, PinMap_DAC);
+    MBED_ASSERT(pos_input != NC);
+
+    obj->dac = DAC_0;
+
+    dac_get_config_defaults(&config_dac);
+    dac_init(&dac_instance, (Dac *)DAC_0, &config_dac);
+
+    dac_chan_get_config_defaults(&config_dac_chan);
+    dac_chan_set_config(&dac_instance, DAC_CHANNEL_0, &config_dac_chan);
+    dac_chan_enable(&dac_instance, DAC_CHANNEL_0);
+
+    dac_enable(&dac_instance);
+}
+
+void analogout_free(dac_t *obj)
+{
+    MBED_ASSERT(obj);
+    struct system_pinmux_config pin_conf;
+
+    dac_disable(&dac_instance);
+    pin_conf.direction = SYSTEM_PINMUX_PIN_DIR_INPUT;
+    pin_conf.input_pull = SYSTEM_PINMUX_PIN_PULL_UP;
+    pin_conf.powersave    = false;
+    pin_conf.mux_position = SYSTEM_PINMUX_GPIO;
+    system_pinmux_pin_set_config(PA02, &pin_conf);  /*PA02 is the only DAC pin available*/
+}
+
+void analogout_write(dac_t *obj, float value)
+{
+    MBED_ASSERT(obj);
+    uint16_t count_val = 0;
+    if (value < 0.0f) {
+        count_val = 0;
+    } else if (value > 1.0f) {
+        count_val = MAX_VAL_10BIT;
+    } else {
+        count_val = (uint16_t)(value * (float)MAX_VAL_10BIT);
+    }
+    dac_chan_write(&dac_instance, DAC_CHANNEL_0, count_val);
+
+}
+
+void analogout_write_u16(dac_t *obj, uint16_t value)
+{
+    MBED_ASSERT(obj);
+    uint16_t count_val;
+    count_val = (uint16_t)((value * (float)MAX_VAL_10BIT) / 0xFFFF);  /*Normalization to the value 0xFFFF*/
+    dac_chan_write(&dac_instance, DAC_CHANNEL_0, count_val);
+
+}
+
+static uint32_t data_reg_read(dac_t *obj)
+{
+    Dac *const dac_module = (Dac *)obj->dac;
+    return (uint32_t)dac_module->DATA.reg;
+}
+
+float analogout_read(dac_t *obj)
+{
+    MBED_ASSERT(obj);
+    uint32_t data_val = data_reg_read(obj);
+    return data_val/(float)MAX_VAL_10BIT;
+}
+
+uint16_t analogout_read_u16(dac_t *obj)
+{
+    MBED_ASSERT(obj);
+    uint32_t data_val = data_reg_read(obj);
+    return (uint16_t)((data_val / (float)MAX_VAL_10BIT) * 0xFFFF);   /*Normalization to the value 0xFFFF*/
+}