![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
AdiSense1000_V21 MBED API
Fork of AdiSense1000 by
main.cpp
- Committer:
- Dan O'Donovan
- Date:
- 2018-03-26
- Branch:
- v2.0
- Revision:
- 27:567abf893938
- Parent:
- 23:2adb6216b001
- Child:
- 29:57edca10d78c
File content as of revision 27:567abf893938:
/* CONFIDENTIAL AND PROPRIETARY INFORMATION Copyright (c) 2018 Emutex Ltd. All rights reserved. This software and documentation contain confidential and proprietary information that is the property of Emutex Ltd. The software and documentation are furnished under a license agreement and may be used or copied only in accordance with the terms of the license agreement. No part of the software and documentation may be reproduced, transmitted, or translated, in any form or by any means, electronic, mechanical, manual, optical, or otherwise, without prior written permission of Emutex Ltd., or as expressly provided by the license agreement. Reverse engineering is prohibited, and reproduction, disclosure or use without specific written authorization of Emutex Ltd. is strictly forbidden. * Copyright 2017 (c) Analog Devices, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software. - Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component. THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ /*! ****************************************************************************** * @file: *----------------------------------------------------------------------------- * */ #include "mbed.h" #include "inc/adi_sense_api.h" #include "inc/adi_sense_1000/adi_sense_1000_api.h" #include "inc/adi_sense_log.h" #include "common/utils.h" extern ADI_SENSE_CONFIG sensor0_rtd_2w_pt100_config; extern ADI_SENSE_CONFIG sensor0_microphone_config; extern ADI_SENSE_CONFIG sensor0_diode_2c_config; extern ADI_SENSE_CONFIG sensor1_typeK_cjc1_config; extern ADI_SENSE_CONFIG sensor1_rtd_3w_pt100_config; extern ADI_SENSE_CONFIG sensor1_diode_3c_config; extern ADI_SENSE_CONFIG sensor2_typeT_cjc0_config; extern ADI_SENSE_CONFIG sensor2_bridge_6w_pressure_config; extern ADI_SENSE_CONFIG sensor3_typeJ_cjc0_config; extern ADI_SENSE_CONFIG sensor3_thermistor_10k_ntc_config; extern ADI_SENSE_CONFIG voltage_honeywellPressure_config; extern ADI_SENSE_CONFIG current_honeywellPressure_config; extern ADI_SENSE_CONFIG i2c0_honeywellHumidicon_config; extern ADI_SENSE_CONFIG i2c0_sensirionSHT3X_config; extern ADI_SENSE_CONFIG i2c0_onsemiNOA1305_config; extern ADI_SENSE_CONFIG spi0_honeywellTrustability_config; extern ADI_SENSE_CONFIG spi0_adiAdxl362_config; extern ADI_SENSE_CONFIG spi0_adiAdxl355_config; extern ADI_SENSE_CONFIG multichannel_continuous_config; extern ADI_SENSE_CONFIG multichannel_multicycle_config; extern ADI_SENSE_CONFIG multichannel_singlecycle_config; /* Change the following pointer to select any of the configurations above */ static ADI_SENSE_CONFIG *pSelectedConfig = &sensor0_rtd_2w_pt100_config; static ADI_SENSE_CONNECTION connectionInfo = { .type = ADI_SENSE_CONNECTION_TYPE_SPI, .spi = { .mosiPin = SPI_MOSI, .misoPin = SPI_MISO, .sckPin = SPI_SCK, .csPin = D10, .maxSpeedHz = 2000000, }, .gpio = { .resetPin = D6, .errorPin = D3, .alertPin = D4, .datareadyPin = D5, }, }; int main() { ADI_SENSE_RESULT res; ADI_SENSE_STATUS status; ADI_SENSE_DEVICE_HANDLE hDevice; ADI_SENSE_MEASUREMENT_MODE eMeasurementMode = ADI_SENSE_MEASUREMENT_MODE_NORMAL; bool_t bDeviceReady; /* * Open an ADI Sense device instance. */ res = adi_sense_Open(0, &connectionInfo, &hDevice); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to open device instance"); return res; } /* * Reset the given ADI Sense device.... */ ADI_SENSE_LOG_INFO("Resetting ADI Sense device, please wait..."); res = adi_sense_Reset(hDevice); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to reset device"); return res; } /* * ...and wait until the device is ready. */ do { wait_ms(100); res = adi_sense_GetDeviceReadyState(hDevice, &bDeviceReady); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to get device ready-state"); return res; } } while (! bDeviceReady); ADI_SENSE_LOG_INFO("ADI Sense device ready"); /* * Write configuration settings to the device registers. * Settings are not applied until adi_sense_ApplyConfigUpdates() is called. */ ADI_SENSE_LOG_INFO("Setting device configuration"); res = adi_sense_SetConfig(hDevice, pSelectedConfig); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to set device configuration"); return res; } res = adi_sense_ApplyConfigUpdates(hDevice); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to apply device configuration"); return res; } /* * Check device status after updating the configuration */ res = adi_sense_GetStatus(hDevice, &status); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to retrieve device status"); return res; } if (status.deviceStatus & (ADI_SENSE_DEVICE_STATUS_ERROR | ADI_SENSE_DEVICE_STATUS_ALERT)) { utils_printStatus(&status); } /* * Kick off the measurement cycle here */ ADI_SENSE_LOG_INFO("Configuration completed, starting measurement cycles"); utils_runMeasurement(hDevice, eMeasurementMode); /* * Clean up and exit */ res = adi_sense_Close(hDevice); if (res != ADI_SENSE_SUCCESS) { ADI_SENSE_LOG_ERROR("Failed to close device instance"); return res; } return 0; }