Sean Wilson
/
AdiSense1000_V21
AdiSense1000_V21 MBED API
Fork of AdiSense1000 by
inc/adi_sense_api.h@7:4dbae381f693, 2017-10-20 (annotated)
- Committer:
- kevin1990
- Date:
- Fri Oct 20 15:58:01 2017 +0000
- Revision:
- 7:4dbae381f693
v0.3 release (New Host api)
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
kevin1990 | 7:4dbae381f693 | 1 | /*! |
kevin1990 | 7:4dbae381f693 | 2 | ****************************************************************************** |
kevin1990 | 7:4dbae381f693 | 3 | * @file: adi_sense_api.h |
kevin1990 | 7:4dbae381f693 | 4 | * @brief: ADI Sense Host Library Application Programming Interface (API) |
kevin1990 | 7:4dbae381f693 | 5 | *----------------------------------------------------------------------------- |
kevin1990 | 7:4dbae381f693 | 6 | */ |
kevin1990 | 7:4dbae381f693 | 7 | |
kevin1990 | 7:4dbae381f693 | 8 | /* |
kevin1990 | 7:4dbae381f693 | 9 | Copyright (c) 2017 Emutex Ltd. / Analog Devices, Inc. |
kevin1990 | 7:4dbae381f693 | 10 | |
kevin1990 | 7:4dbae381f693 | 11 | All rights reserved. |
kevin1990 | 7:4dbae381f693 | 12 | |
kevin1990 | 7:4dbae381f693 | 13 | Redistribution and use in source and binary forms, with or without modification, |
kevin1990 | 7:4dbae381f693 | 14 | are permitted provided that the following conditions are met: |
kevin1990 | 7:4dbae381f693 | 15 | - Redistributions of source code must retain the above copyright notice, |
kevin1990 | 7:4dbae381f693 | 16 | this list of conditions and the following disclaimer. |
kevin1990 | 7:4dbae381f693 | 17 | - Redistributions in binary form must reproduce the above copyright notice, |
kevin1990 | 7:4dbae381f693 | 18 | this list of conditions and the following disclaimer in the documentation |
kevin1990 | 7:4dbae381f693 | 19 | and/or other materials provided with the distribution. |
kevin1990 | 7:4dbae381f693 | 20 | - Modified versions of the software must be conspicuously marked as such. |
kevin1990 | 7:4dbae381f693 | 21 | - This software is licensed solely and exclusively for use with processors |
kevin1990 | 7:4dbae381f693 | 22 | manufactured by or for Analog Devices, Inc. |
kevin1990 | 7:4dbae381f693 | 23 | - This software may not be combined or merged with other code in any manner |
kevin1990 | 7:4dbae381f693 | 24 | that would cause the software to become subject to terms and conditions |
kevin1990 | 7:4dbae381f693 | 25 | which differ from those listed here. |
kevin1990 | 7:4dbae381f693 | 26 | - Neither the name of Analog Devices, Inc. nor the names of its |
kevin1990 | 7:4dbae381f693 | 27 | contributors may be used to endorse or promote products derived |
kevin1990 | 7:4dbae381f693 | 28 | from this software without specific prior written permission. |
kevin1990 | 7:4dbae381f693 | 29 | - The use of this software may or may not infringe the patent rights of one |
kevin1990 | 7:4dbae381f693 | 30 | or more patent holders. This license does not release you from the |
kevin1990 | 7:4dbae381f693 | 31 | requirement that you obtain separate licenses from these patent holders |
kevin1990 | 7:4dbae381f693 | 32 | to use this software. |
kevin1990 | 7:4dbae381f693 | 33 | |
kevin1990 | 7:4dbae381f693 | 34 | THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND ANY |
kevin1990 | 7:4dbae381f693 | 35 | EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, |
kevin1990 | 7:4dbae381f693 | 36 | TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
kevin1990 | 7:4dbae381f693 | 37 | NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, |
kevin1990 | 7:4dbae381f693 | 38 | INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES |
kevin1990 | 7:4dbae381f693 | 39 | (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL |
kevin1990 | 7:4dbae381f693 | 40 | PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
kevin1990 | 7:4dbae381f693 | 41 | OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
kevin1990 | 7:4dbae381f693 | 42 | THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
kevin1990 | 7:4dbae381f693 | 43 | NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, |
kevin1990 | 7:4dbae381f693 | 44 | EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
kevin1990 | 7:4dbae381f693 | 45 | */ |
kevin1990 | 7:4dbae381f693 | 46 | |
kevin1990 | 7:4dbae381f693 | 47 | #ifndef __ADI_SENSE_API_H__ |
kevin1990 | 7:4dbae381f693 | 48 | #define __ADI_SENSE_API_H__ |
kevin1990 | 7:4dbae381f693 | 49 | |
kevin1990 | 7:4dbae381f693 | 50 | #include "inc/adi_sense_types.h" |
kevin1990 | 7:4dbae381f693 | 51 | #include "inc/adi_sense_config_types.h" |
kevin1990 | 7:4dbae381f693 | 52 | #include "inc/adi_sense_dsp_data_types.h" |
kevin1990 | 7:4dbae381f693 | 53 | #include "inc/adi_sense_platform.h" |
kevin1990 | 7:4dbae381f693 | 54 | #include "inc/adi_sense_gpio.h" |
kevin1990 | 7:4dbae381f693 | 55 | #include "inc/adi_sense_spi.h" |
kevin1990 | 7:4dbae381f693 | 56 | #include "inc/adi_sense_log.h" |
kevin1990 | 7:4dbae381f693 | 57 | #include "inc/adi_sense_time.h" |
kevin1990 | 7:4dbae381f693 | 58 | |
kevin1990 | 7:4dbae381f693 | 59 | /*! @addtogroup ADI_Sense_Api ADI Sense Host Library API |
kevin1990 | 7:4dbae381f693 | 60 | * @{ |
kevin1990 | 7:4dbae381f693 | 61 | */ |
kevin1990 | 7:4dbae381f693 | 62 | |
kevin1990 | 7:4dbae381f693 | 63 | #ifdef __cplusplus |
kevin1990 | 7:4dbae381f693 | 64 | extern "C" { |
kevin1990 | 7:4dbae381f693 | 65 | #endif |
kevin1990 | 7:4dbae381f693 | 66 | |
kevin1990 | 7:4dbae381f693 | 67 | /*! A handle used in all API functions to identify the ADI Sense device. */ |
kevin1990 | 7:4dbae381f693 | 68 | typedef void* ADI_SENSE_DEVICE_HANDLE; |
kevin1990 | 7:4dbae381f693 | 69 | |
kevin1990 | 7:4dbae381f693 | 70 | /*! Supported connection types for communication with the ADI Sense device. */ |
kevin1990 | 7:4dbae381f693 | 71 | typedef enum { |
kevin1990 | 7:4dbae381f693 | 72 | ADI_SENSE_CONNECTION_TYPE_SPI = 1, |
kevin1990 | 7:4dbae381f693 | 73 | /*!< Serial Peripheral Interface (SPI) connection type */ |
kevin1990 | 7:4dbae381f693 | 74 | } ADI_SENSE_CONNECTION_TYPE; |
kevin1990 | 7:4dbae381f693 | 75 | |
kevin1990 | 7:4dbae381f693 | 76 | /*! Connection details for communication with a ADI Sense device instance. */ |
kevin1990 | 7:4dbae381f693 | 77 | typedef struct { |
kevin1990 | 7:4dbae381f693 | 78 | ADI_SENSE_CONNECTION_TYPE type; |
kevin1990 | 7:4dbae381f693 | 79 | /*!< Connection type selection */ |
kevin1990 | 7:4dbae381f693 | 80 | ADI_SENSE_PLATFORM_SPI_CONFIG spi; |
kevin1990 | 7:4dbae381f693 | 81 | /*!< SPI connection parameters, required if SPI connection type is used */ |
kevin1990 | 7:4dbae381f693 | 82 | ADI_SENSE_PLATFORM_GPIO_CONFIG gpio; |
kevin1990 | 7:4dbae381f693 | 83 | /*!< GPIO connection parameters, for device reset and status I/O signals */ |
kevin1990 | 7:4dbae381f693 | 84 | } ADI_SENSE_CONNECTION; |
kevin1990 | 7:4dbae381f693 | 85 | |
kevin1990 | 7:4dbae381f693 | 86 | /*! Bit masks (flags) for the different device status indicators. */ |
kevin1990 | 7:4dbae381f693 | 87 | typedef enum { |
kevin1990 | 7:4dbae381f693 | 88 | ADI_SENSE_DEVICE_STATUS_BUSY = (1 << 0), |
kevin1990 | 7:4dbae381f693 | 89 | /*!< Indicates that a command is currently running on the device */ |
kevin1990 | 7:4dbae381f693 | 90 | ADI_SENSE_DEVICE_STATUS_DATAREADY = (1 << 1), |
kevin1990 | 7:4dbae381f693 | 91 | /*!< Indicates the availability of measurement data for retrieval */ |
kevin1990 | 7:4dbae381f693 | 92 | ADI_SENSE_DEVICE_STATUS_ERROR = (1 << 2), |
kevin1990 | 7:4dbae381f693 | 93 | /*!< Indicates that an error condition has been detected by the device */ |
kevin1990 | 7:4dbae381f693 | 94 | ADI_SENSE_DEVICE_STATUS_ALERT = (1 << 3), |
kevin1990 | 7:4dbae381f693 | 95 | /*!< Indicates that an alert condition has been detected by the device */ |
kevin1990 | 7:4dbae381f693 | 96 | } ADI_SENSE_DEVICE_STATUS_FLAGS; |
kevin1990 | 7:4dbae381f693 | 97 | |
kevin1990 | 7:4dbae381f693 | 98 | /*! Bit masks (flags) for the different diagnostics status indicators. */ |
kevin1990 | 7:4dbae381f693 | 99 | typedef enum { |
kevin1990 | 7:4dbae381f693 | 100 | ADI_SENSE_DIAGNOSTICS_STATUS_CHECKSUM_ERROR = (1 << 0), |
kevin1990 | 7:4dbae381f693 | 101 | /*!< Indicates Error on Internal Checksum Calculations */ |
kevin1990 | 7:4dbae381f693 | 102 | ADI_SENSE_DIAGNOSTICS_STATUS_COMMS_ERROR = (1 << 1), |
kevin1990 | 7:4dbae381f693 | 103 | /*!< Indicates Error on Internal Device Communications */ |
kevin1990 | 7:4dbae381f693 | 104 | ADI_SENSE_DIAGNOSTICS_STATUS_SUPPLY_MONITOR_ERROR = (1 << 2), |
kevin1990 | 7:4dbae381f693 | 105 | /*!< Indicates Low Voltage on Internal Supply Voltages */ |
kevin1990 | 7:4dbae381f693 | 106 | ADI_SENSE_DIAGNOSTICS_STATUS_SUPPLY_CAP_ERROR = (1 << 3), |
kevin1990 | 7:4dbae381f693 | 107 | /*!< Indicates Fault on Internal Supply Regulator Capacitor */ |
kevin1990 | 7:4dbae381f693 | 108 | ADI_SENSE_DIAGNOSTICS_STATUS_AINM_UV_ERROR = (1 << 4), |
kevin1990 | 7:4dbae381f693 | 109 | /*!< Indicates Under-Voltage Error on Negative Analog Input */ |
kevin1990 | 7:4dbae381f693 | 110 | ADI_SENSE_DIAGNOSTICS_STATUS_AINM_OV_ERROR = (1 << 5), |
kevin1990 | 7:4dbae381f693 | 111 | /*!< Indicates Over-Voltage Error on Negative Analog Input */ |
kevin1990 | 7:4dbae381f693 | 112 | ADI_SENSE_DIAGNOSTICS_STATUS_AINP_UV_ERROR = (1 << 6), |
kevin1990 | 7:4dbae381f693 | 113 | /*!< Indicates Under-Voltage Error on Positive Analog Input */ |
kevin1990 | 7:4dbae381f693 | 114 | ADI_SENSE_DIAGNOSTICS_STATUS_AINP_OV_ERROR = (1 << 7), |
kevin1990 | 7:4dbae381f693 | 115 | /*!< Indicates Over-Voltage Error on Positive Analog Input */ |
kevin1990 | 7:4dbae381f693 | 116 | ADI_SENSE_DIAGNOSTICS_STATUS_CONVERSION_ERROR = (1 << 8), |
kevin1990 | 7:4dbae381f693 | 117 | /*!< Indicates Error During Internal ADC Conversions */ |
kevin1990 | 7:4dbae381f693 | 118 | ADI_SENSE_DIAGNOSTICS_STATUS_CALIBRATION_ERROR = (1 << 9), |
kevin1990 | 7:4dbae381f693 | 119 | /*!< Indicates Error During Internal Device Calibrations */ |
kevin1990 | 7:4dbae381f693 | 120 | } ADI_SENSE_DIAGNOSTICS_STATUS_FLAGS; |
kevin1990 | 7:4dbae381f693 | 121 | |
kevin1990 | 7:4dbae381f693 | 122 | /*! Bit masks (flags) for the different channel alert indicators. */ |
kevin1990 | 7:4dbae381f693 | 123 | typedef enum { |
kevin1990 | 7:4dbae381f693 | 124 | ADI_SENSE_CHANNEL_ALERT_TIMEOUT = (1 << 0), |
kevin1990 | 7:4dbae381f693 | 125 | /*!< Indicates timeout condition detected on the channel */ |
kevin1990 | 7:4dbae381f693 | 126 | ADI_SENSE_CHANNEL_ALERT_UNDER_RANGE = (1 << 1), |
kevin1990 | 7:4dbae381f693 | 127 | /*!< Indicates under-voltage condition detected on the channel */ |
kevin1990 | 7:4dbae381f693 | 128 | ADI_SENSE_CHANNEL_ALERT_OVER_RANGE = (1 << 2), |
kevin1990 | 7:4dbae381f693 | 129 | /*!< Indicates over-voltage condition detected on the channel */ |
kevin1990 | 7:4dbae381f693 | 130 | ADI_SENSE_CHANNEL_ALERT_LOW_LIMIT = (1 << 3), |
kevin1990 | 7:4dbae381f693 | 131 | /*!< Indicates measurement result was below configured minimum threshold */ |
kevin1990 | 7:4dbae381f693 | 132 | ADI_SENSE_CHANNEL_ALERT_HIGH_LIMIT = (1 << 4), |
kevin1990 | 7:4dbae381f693 | 133 | /*!< Indicates measurement result was above configured maximum threshold */ |
kevin1990 | 7:4dbae381f693 | 134 | ADI_SENSE_CHANNEL_ALERT_SENSOR_OPEN = (1 << 5), |
kevin1990 | 7:4dbae381f693 | 135 | /*!< Indicates open circuit or mis-wire condition detected on the channel */ |
kevin1990 | 7:4dbae381f693 | 136 | ADI_SENSE_CHANNEL_ALERT_REF_DETECT = (1 << 6), |
kevin1990 | 7:4dbae381f693 | 137 | /*!< Indicates reference-detect error condition detected on the channel */ |
kevin1990 | 7:4dbae381f693 | 138 | } ADI_SENSE_CHANNEL_ALERT_FLAGS; |
kevin1990 | 7:4dbae381f693 | 139 | |
kevin1990 | 7:4dbae381f693 | 140 | /*! Status details retreived from the ADI Sense device. */ |
kevin1990 | 7:4dbae381f693 | 141 | typedef struct { |
kevin1990 | 7:4dbae381f693 | 142 | ADI_SENSE_DEVICE_STATUS_FLAGS deviceStatus; |
kevin1990 | 7:4dbae381f693 | 143 | /*!< General summary status information from the device */ |
kevin1990 | 7:4dbae381f693 | 144 | ADI_SENSE_DIAGNOSTICS_STATUS_FLAGS diagnosticsStatus; |
kevin1990 | 7:4dbae381f693 | 145 | /*!< Diagnostic error status information from the device */ |
kevin1990 | 7:4dbae381f693 | 146 | ADI_SENSE_CHANNEL_ALERT_FLAGS channelAlerts[ADI_SENSE_MAX_CHANNELS]; |
kevin1990 | 7:4dbae381f693 | 147 | /*!< Per-channel alert status information from the device */ |
kevin1990 | 7:4dbae381f693 | 148 | } ADI_SENSE_STATUS; |
kevin1990 | 7:4dbae381f693 | 149 | |
kevin1990 | 7:4dbae381f693 | 150 | /*! Data sample details retreived from the ADI Sense device. */ |
kevin1990 | 7:4dbae381f693 | 151 | typedef struct { |
kevin1990 | 7:4dbae381f693 | 152 | ADI_SENSE_DEVICE_STATUS_FLAGS status; |
kevin1990 | 7:4dbae381f693 | 153 | /*!< Device summary status snapshot when the sample was recorded */ |
kevin1990 | 7:4dbae381f693 | 154 | ADI_SENSE_CHANNEL_ID channelId; |
kevin1990 | 7:4dbae381f693 | 155 | /*!< The measurement channel from which this sample was obtained */ |
kevin1990 | 7:4dbae381f693 | 156 | uint32_t rawValue; |
kevin1990 | 7:4dbae381f693 | 157 | /*!< The raw (unprocessed) value obtained directly from the measurement |
kevin1990 | 7:4dbae381f693 | 158 | * channel, if available |
kevin1990 | 7:4dbae381f693 | 159 | */ |
kevin1990 | 7:4dbae381f693 | 160 | float32_t processedValue; |
kevin1990 | 7:4dbae381f693 | 161 | /*!< The processed value obtained from the measurement channel, as a final |
kevin1990 | 7:4dbae381f693 | 162 | * measurement value, following calibration and linearisation correction, |
kevin1990 | 7:4dbae381f693 | 163 | * and conversion into an appropriate unit of measurement. |
kevin1990 | 7:4dbae381f693 | 164 | */ |
kevin1990 | 7:4dbae381f693 | 165 | } ADI_SENSE_DATA_SAMPLE; |
kevin1990 | 7:4dbae381f693 | 166 | |
kevin1990 | 7:4dbae381f693 | 167 | |
kevin1990 | 7:4dbae381f693 | 168 | /****************************************************************************** |
kevin1990 | 7:4dbae381f693 | 169 | * ADI Sense High-Level API function prototypes |
kevin1990 | 7:4dbae381f693 | 170 | *****************************************************************************/ |
kevin1990 | 7:4dbae381f693 | 171 | |
kevin1990 | 7:4dbae381f693 | 172 | /*! |
kevin1990 | 7:4dbae381f693 | 173 | * @brief Open ADI Sense device handle and set up communication interface. |
kevin1990 | 7:4dbae381f693 | 174 | * |
kevin1990 | 7:4dbae381f693 | 175 | * @param[in] nDeviceIndex Zero-based index number identifying this device |
kevin1990 | 7:4dbae381f693 | 176 | * instance. Note that this will be used to |
kevin1990 | 7:4dbae381f693 | 177 | * retrieve a specific device configuration for |
kevin1990 | 7:4dbae381f693 | 178 | * this device (see @ref adi_sense_SetDeviceConfig |
kevin1990 | 7:4dbae381f693 | 179 | * and @ref ADI_SENSE_CONFIG) |
kevin1990 | 7:4dbae381f693 | 180 | * @param[in] pConnectionInfo Host-specific connection details (e.g. SPI, GPIO) |
kevin1990 | 7:4dbae381f693 | 181 | * @param[out] phDevice Pointer to return an ADI Sense device handle |
kevin1990 | 7:4dbae381f693 | 182 | * |
kevin1990 | 7:4dbae381f693 | 183 | * @return Status |
kevin1990 | 7:4dbae381f693 | 184 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 185 | * - #ADI_SENSE_NO_MEM Failed to allocate memory resources. |
kevin1990 | 7:4dbae381f693 | 186 | * - #ADI_SENSE_INVALID_DEVICE_NUM Invalid device index specified |
kevin1990 | 7:4dbae381f693 | 187 | * |
kevin1990 | 7:4dbae381f693 | 188 | * @details Configure and initialise the Log interface and the SPI/GPIO |
kevin1990 | 7:4dbae381f693 | 189 | * communication interface to the ADISense module. |
kevin1990 | 7:4dbae381f693 | 190 | */ |
kevin1990 | 7:4dbae381f693 | 191 | ADI_SENSE_RESULT adi_sense_Open( |
kevin1990 | 7:4dbae381f693 | 192 | unsigned const nDeviceIndex, |
kevin1990 | 7:4dbae381f693 | 193 | ADI_SENSE_CONNECTION * const pConnectionInfo, |
kevin1990 | 7:4dbae381f693 | 194 | ADI_SENSE_DEVICE_HANDLE * const phDevice); |
kevin1990 | 7:4dbae381f693 | 195 | |
kevin1990 | 7:4dbae381f693 | 196 | /*! |
kevin1990 | 7:4dbae381f693 | 197 | * @brief Close ADI Sense device context and free resources. |
kevin1990 | 7:4dbae381f693 | 198 | * |
kevin1990 | 7:4dbae381f693 | 199 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 200 | * |
kevin1990 | 7:4dbae381f693 | 201 | * @return Status |
kevin1990 | 7:4dbae381f693 | 202 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 203 | */ |
kevin1990 | 7:4dbae381f693 | 204 | ADI_SENSE_RESULT adi_sense_Close( |
kevin1990 | 7:4dbae381f693 | 205 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 206 | |
kevin1990 | 7:4dbae381f693 | 207 | /*! |
kevin1990 | 7:4dbae381f693 | 208 | * @brief Get the current state of the specified GPIO input signal. |
kevin1990 | 7:4dbae381f693 | 209 | * |
kevin1990 | 7:4dbae381f693 | 210 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 211 | * @param[in] ePin GPIO pin to query |
kevin1990 | 7:4dbae381f693 | 212 | * @param[out] pbError Pointer to return the state of the status signal GPIO pin |
kevin1990 | 7:4dbae381f693 | 213 | * |
kevin1990 | 7:4dbae381f693 | 214 | * @return Status |
kevin1990 | 7:4dbae381f693 | 215 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 216 | * - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified. |
kevin1990 | 7:4dbae381f693 | 217 | * |
kevin1990 | 7:4dbae381f693 | 218 | * @details Sets *pbAsserted to true if the status signal is asserted, or false |
kevin1990 | 7:4dbae381f693 | 219 | * otherwise. |
kevin1990 | 7:4dbae381f693 | 220 | */ |
kevin1990 | 7:4dbae381f693 | 221 | ADI_SENSE_RESULT adi_sense_GetGpioState( |
kevin1990 | 7:4dbae381f693 | 222 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 223 | ADI_SENSE_GPIO_PIN const ePinId, |
kevin1990 | 7:4dbae381f693 | 224 | bool_t * const pbAsserted); |
kevin1990 | 7:4dbae381f693 | 225 | |
kevin1990 | 7:4dbae381f693 | 226 | /*! |
kevin1990 | 7:4dbae381f693 | 227 | * @brief Register an application-defined callback function for GPIO interrupts |
kevin1990 | 7:4dbae381f693 | 228 | * |
kevin1990 | 7:4dbae381f693 | 229 | * @param[in] hDevice ADI Sense context handle (@ref adi_sense_Open) |
kevin1990 | 7:4dbae381f693 | 230 | * @param[in] ePin GPIO pin on which to enable/disable interrupts |
kevin1990 | 7:4dbae381f693 | 231 | * @param[in] callbackFunction Function to be called when an interrupt occurs. |
kevin1990 | 7:4dbae381f693 | 232 | * Specify NULL here to disable interrupts. |
kevin1990 | 7:4dbae381f693 | 233 | * @param[in] pCallbackParam Optional opaque parameter passed to the callback |
kevin1990 | 7:4dbae381f693 | 234 | * |
kevin1990 | 7:4dbae381f693 | 235 | * @return Status |
kevin1990 | 7:4dbae381f693 | 236 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 237 | * - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified. |
kevin1990 | 7:4dbae381f693 | 238 | */ |
kevin1990 | 7:4dbae381f693 | 239 | ADI_SENSE_RESULT adi_sense_RegisterGpioCallback( |
kevin1990 | 7:4dbae381f693 | 240 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 241 | ADI_SENSE_GPIO_PIN const ePinId, |
kevin1990 | 7:4dbae381f693 | 242 | ADI_SENSE_GPIO_CALLBACK const callbackFunction, |
kevin1990 | 7:4dbae381f693 | 243 | void * const pCallbackParam); |
kevin1990 | 7:4dbae381f693 | 244 | |
kevin1990 | 7:4dbae381f693 | 245 | /*! |
kevin1990 | 7:4dbae381f693 | 246 | * @brief Reset the ADI Sense device. |
kevin1990 | 7:4dbae381f693 | 247 | * |
kevin1990 | 7:4dbae381f693 | 248 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 249 | * |
kevin1990 | 7:4dbae381f693 | 250 | * @return Status |
kevin1990 | 7:4dbae381f693 | 251 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 252 | * |
kevin1990 | 7:4dbae381f693 | 253 | * @details Trigger a hardware-reset of the ADI Sense device. |
kevin1990 | 7:4dbae381f693 | 254 | * |
kevin1990 | 7:4dbae381f693 | 255 | * @note The device may require several seconds before it is ready for use |
kevin1990 | 7:4dbae381f693 | 256 | * again. @ref adi_sense_GetDeviceReadyState may be used to check if |
kevin1990 | 7:4dbae381f693 | 257 | * the device is ready. |
kevin1990 | 7:4dbae381f693 | 258 | */ |
kevin1990 | 7:4dbae381f693 | 259 | ADI_SENSE_RESULT adi_sense_Reset( |
kevin1990 | 7:4dbae381f693 | 260 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 261 | |
kevin1990 | 7:4dbae381f693 | 262 | /*! |
kevin1990 | 7:4dbae381f693 | 263 | * @brief Check if the device is ready, following power-up or a reset. |
kevin1990 | 7:4dbae381f693 | 264 | * |
kevin1990 | 7:4dbae381f693 | 265 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 266 | * @param[out] pbReady Pointer to return true if the device is ready, or false |
kevin1990 | 7:4dbae381f693 | 267 | * otherwise |
kevin1990 | 7:4dbae381f693 | 268 | * |
kevin1990 | 7:4dbae381f693 | 269 | * @return Status |
kevin1990 | 7:4dbae381f693 | 270 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 271 | * |
kevin1990 | 7:4dbae381f693 | 272 | * @details This function attempts to read a fixed-value device register via |
kevin1990 | 7:4dbae381f693 | 273 | * the communication interface. |
kevin1990 | 7:4dbae381f693 | 274 | */ |
kevin1990 | 7:4dbae381f693 | 275 | ADI_SENSE_RESULT adi_sense_GetDeviceReadyState( |
kevin1990 | 7:4dbae381f693 | 276 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 277 | bool_t * const pbReady); |
kevin1990 | 7:4dbae381f693 | 278 | |
kevin1990 | 7:4dbae381f693 | 279 | /*! |
kevin1990 | 7:4dbae381f693 | 280 | * @brief Obtain the product ID from the device. |
kevin1990 | 7:4dbae381f693 | 281 | * |
kevin1990 | 7:4dbae381f693 | 282 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 283 | * @param[out] pProductId Pointer to return the product ID value |
kevin1990 | 7:4dbae381f693 | 284 | * |
kevin1990 | 7:4dbae381f693 | 285 | * @return Status |
kevin1990 | 7:4dbae381f693 | 286 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 287 | * |
kevin1990 | 7:4dbae381f693 | 288 | * @details Reads the product ID registers on the device and returns the value. |
kevin1990 | 7:4dbae381f693 | 289 | */ |
kevin1990 | 7:4dbae381f693 | 290 | ADI_SENSE_RESULT adi_sense_GetProductID( |
kevin1990 | 7:4dbae381f693 | 291 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 292 | ADI_SENSE_PRODUCT_ID * const pProductId); |
kevin1990 | 7:4dbae381f693 | 293 | |
kevin1990 | 7:4dbae381f693 | 294 | /*! |
kevin1990 | 7:4dbae381f693 | 295 | * @brief Write full configuration settings to the device registers. |
kevin1990 | 7:4dbae381f693 | 296 | * |
kevin1990 | 7:4dbae381f693 | 297 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 298 | * @param[out] pConfig Pointer to the configuration data structure |
kevin1990 | 7:4dbae381f693 | 299 | * |
kevin1990 | 7:4dbae381f693 | 300 | * @return Status |
kevin1990 | 7:4dbae381f693 | 301 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 302 | * |
kevin1990 | 7:4dbae381f693 | 303 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 304 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 305 | * |
kevin1990 | 7:4dbae381f693 | 306 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 307 | */ |
kevin1990 | 7:4dbae381f693 | 308 | ADI_SENSE_RESULT adi_sense_SetDeviceConfig( |
kevin1990 | 7:4dbae381f693 | 309 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 310 | ADI_SENSE_CONFIG * const pConfig); |
kevin1990 | 7:4dbae381f693 | 311 | |
kevin1990 | 7:4dbae381f693 | 312 | /*! |
kevin1990 | 7:4dbae381f693 | 313 | * @brief Write DSP look-up table data to the device memory |
kevin1990 | 7:4dbae381f693 | 314 | * |
kevin1990 | 7:4dbae381f693 | 315 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 316 | * @param[out] pDspData Pointer to the DSP look-up table data structure |
kevin1990 | 7:4dbae381f693 | 317 | * |
kevin1990 | 7:4dbae381f693 | 318 | * @return Status |
kevin1990 | 7:4dbae381f693 | 319 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 320 | * |
kevin1990 | 7:4dbae381f693 | 321 | * @details Validates the DSP look-up table data format and loads it into |
kevin1990 | 7:4dbae381f693 | 322 | * device memory via dedicated keyhole registers. |
kevin1990 | 7:4dbae381f693 | 323 | * |
kevin1990 | 7:4dbae381f693 | 324 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 325 | */ |
kevin1990 | 7:4dbae381f693 | 326 | ADI_SENSE_RESULT adi_sense_SetDspData( |
kevin1990 | 7:4dbae381f693 | 327 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 328 | ADI_SENSE_DSP_LUT_RAW * const pDspData); |
kevin1990 | 7:4dbae381f693 | 329 | |
kevin1990 | 7:4dbae381f693 | 330 | /*! |
kevin1990 | 7:4dbae381f693 | 331 | * @brief Apply the configuration settings currently stored in device registers |
kevin1990 | 7:4dbae381f693 | 332 | * |
kevin1990 | 7:4dbae381f693 | 333 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 334 | * |
kevin1990 | 7:4dbae381f693 | 335 | * @return Status |
kevin1990 | 7:4dbae381f693 | 336 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 337 | * |
kevin1990 | 7:4dbae381f693 | 338 | * @details Instructs the ADI Sense device to reload and apply configuration |
kevin1990 | 7:4dbae381f693 | 339 | * from the device configuration registers. Changes to configuration |
kevin1990 | 7:4dbae381f693 | 340 | * registers are ignored by the device until this function is called. |
kevin1990 | 7:4dbae381f693 | 341 | * |
kevin1990 | 7:4dbae381f693 | 342 | * @note No other command must be running when this is called. |
kevin1990 | 7:4dbae381f693 | 343 | */ |
kevin1990 | 7:4dbae381f693 | 344 | ADI_SENSE_RESULT adi_sense_ApplyConfigUpdates( |
kevin1990 | 7:4dbae381f693 | 345 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 346 | |
kevin1990 | 7:4dbae381f693 | 347 | /*! |
kevin1990 | 7:4dbae381f693 | 348 | * @brief Store the configuration settings to persistent memory on the device. |
kevin1990 | 7:4dbae381f693 | 349 | * |
kevin1990 | 7:4dbae381f693 | 350 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 351 | * |
kevin1990 | 7:4dbae381f693 | 352 | * @return Status |
kevin1990 | 7:4dbae381f693 | 353 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 354 | * |
kevin1990 | 7:4dbae381f693 | 355 | * @details Instructs the ADI Sense device to save the current contents of its |
kevin1990 | 7:4dbae381f693 | 356 | * device configuration registers to non-volatile memory. |
kevin1990 | 7:4dbae381f693 | 357 | * |
kevin1990 | 7:4dbae381f693 | 358 | * @note No other command must be running when this is called. |
kevin1990 | 7:4dbae381f693 | 359 | * @note Do not power down the device while this command is running. |
kevin1990 | 7:4dbae381f693 | 360 | */ |
kevin1990 | 7:4dbae381f693 | 361 | ADI_SENSE_RESULT adi_sense_SaveConfig( |
kevin1990 | 7:4dbae381f693 | 362 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 363 | |
kevin1990 | 7:4dbae381f693 | 364 | /*! |
kevin1990 | 7:4dbae381f693 | 365 | * @brief Restore configuration settings from persistent memory on the device. |
kevin1990 | 7:4dbae381f693 | 366 | * |
kevin1990 | 7:4dbae381f693 | 367 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 368 | * |
kevin1990 | 7:4dbae381f693 | 369 | * @return Status |
kevin1990 | 7:4dbae381f693 | 370 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 371 | * |
kevin1990 | 7:4dbae381f693 | 372 | * @details Instructs the ADI Sense device to restore the contents of its |
kevin1990 | 7:4dbae381f693 | 373 | * device configuration registers from non-volatile memory. |
kevin1990 | 7:4dbae381f693 | 374 | * |
kevin1990 | 7:4dbae381f693 | 375 | * @note No other command must be running when this is called. |
kevin1990 | 7:4dbae381f693 | 376 | */ |
kevin1990 | 7:4dbae381f693 | 377 | ADI_SENSE_RESULT adi_sense_RestoreConfig( |
kevin1990 | 7:4dbae381f693 | 378 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 379 | |
kevin1990 | 7:4dbae381f693 | 380 | /*! |
kevin1990 | 7:4dbae381f693 | 381 | * @brief Start the measurement cycles on the device. |
kevin1990 | 7:4dbae381f693 | 382 | * |
kevin1990 | 7:4dbae381f693 | 383 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 384 | * |
kevin1990 | 7:4dbae381f693 | 385 | * @return Status |
kevin1990 | 7:4dbae381f693 | 386 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 387 | * |
kevin1990 | 7:4dbae381f693 | 388 | * @details Instructs the ADI Sense device to start executing measurement cycles |
kevin1990 | 7:4dbae381f693 | 389 | * according to the current applied configuration settings. The |
kevin1990 | 7:4dbae381f693 | 390 | * DATAREADY status signal will be asserted whenever new measurement |
kevin1990 | 7:4dbae381f693 | 391 | * data is published, according to selected settings. |
kevin1990 | 7:4dbae381f693 | 392 | * Measurement cycles may be stopped by calling @ref |
kevin1990 | 7:4dbae381f693 | 393 | * adi_sense_StopMeasurement. |
kevin1990 | 7:4dbae381f693 | 394 | * |
kevin1990 | 7:4dbae381f693 | 395 | * @note No other command must be running when this is called. |
kevin1990 | 7:4dbae381f693 | 396 | */ |
kevin1990 | 7:4dbae381f693 | 397 | ADI_SENSE_RESULT adi_sense_StartMeasurement( |
kevin1990 | 7:4dbae381f693 | 398 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 399 | |
kevin1990 | 7:4dbae381f693 | 400 | /*! |
kevin1990 | 7:4dbae381f693 | 401 | * @brief Stop the measurement cycles on the device. |
kevin1990 | 7:4dbae381f693 | 402 | * |
kevin1990 | 7:4dbae381f693 | 403 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 404 | * |
kevin1990 | 7:4dbae381f693 | 405 | * @return Status |
kevin1990 | 7:4dbae381f693 | 406 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 407 | * |
kevin1990 | 7:4dbae381f693 | 408 | * @details Instructs the ADI Sense device to stop executing measurement cycles. |
kevin1990 | 7:4dbae381f693 | 409 | * The command may be delayed until the current conversion, if any, has |
kevin1990 | 7:4dbae381f693 | 410 | * been completed and published. |
kevin1990 | 7:4dbae381f693 | 411 | * |
kevin1990 | 7:4dbae381f693 | 412 | * @note To be used only if a measurement command is currently running. |
kevin1990 | 7:4dbae381f693 | 413 | */ |
kevin1990 | 7:4dbae381f693 | 414 | ADI_SENSE_RESULT adi_sense_StopMeasurement( |
kevin1990 | 7:4dbae381f693 | 415 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 416 | |
kevin1990 | 7:4dbae381f693 | 417 | /*! |
kevin1990 | 7:4dbae381f693 | 418 | * @brief Run built-in diagnostic checks on the device. |
kevin1990 | 7:4dbae381f693 | 419 | * |
kevin1990 | 7:4dbae381f693 | 420 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 421 | * |
kevin1990 | 7:4dbae381f693 | 422 | * @return Status |
kevin1990 | 7:4dbae381f693 | 423 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 424 | * |
kevin1990 | 7:4dbae381f693 | 425 | * @details Instructs the ADI Sense device to start executing measurement cycles |
kevin1990 | 7:4dbae381f693 | 426 | * according to the current applied configuration settings. Device |
kevin1990 | 7:4dbae381f693 | 427 | * status registers will be updated to indicate if any errors were |
kevin1990 | 7:4dbae381f693 | 428 | * detected by the diagnostics checks. |
kevin1990 | 7:4dbae381f693 | 429 | * |
kevin1990 | 7:4dbae381f693 | 430 | * @note No other command must be running when this is called. |
kevin1990 | 7:4dbae381f693 | 431 | */ |
kevin1990 | 7:4dbae381f693 | 432 | ADI_SENSE_RESULT adi_sense_RunDiagnostics( |
kevin1990 | 7:4dbae381f693 | 433 | ADI_SENSE_DEVICE_HANDLE const hDevice); |
kevin1990 | 7:4dbae381f693 | 434 | |
kevin1990 | 7:4dbae381f693 | 435 | /*! |
kevin1990 | 7:4dbae381f693 | 436 | * @brief Read the current status from the device registers. |
kevin1990 | 7:4dbae381f693 | 437 | * |
kevin1990 | 7:4dbae381f693 | 438 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 439 | * @param[out] pStatus Pointer to return the status summary obtained from the |
kevin1990 | 7:4dbae381f693 | 440 | * device. |
kevin1990 | 7:4dbae381f693 | 441 | * |
kevin1990 | 7:4dbae381f693 | 442 | * @return Status |
kevin1990 | 7:4dbae381f693 | 443 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 444 | * |
kevin1990 | 7:4dbae381f693 | 445 | * @details Reads the status registers and extracts the relevant information |
kevin1990 | 7:4dbae381f693 | 446 | * to return to the caller. |
kevin1990 | 7:4dbae381f693 | 447 | * |
kevin1990 | 7:4dbae381f693 | 448 | * @note This may be called at any time, assuming the device is ready. |
kevin1990 | 7:4dbae381f693 | 449 | */ |
kevin1990 | 7:4dbae381f693 | 450 | ADI_SENSE_RESULT adi_sense_GetStatus( |
kevin1990 | 7:4dbae381f693 | 451 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 452 | ADI_SENSE_STATUS * const pStatus); |
kevin1990 | 7:4dbae381f693 | 453 | |
kevin1990 | 7:4dbae381f693 | 454 | /*! |
kevin1990 | 7:4dbae381f693 | 455 | * @brief Read measurement data samples from the device registers. |
kevin1990 | 7:4dbae381f693 | 456 | * |
kevin1990 | 7:4dbae381f693 | 457 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 458 | * @param[out] pSamples Pointer to return a set of requested data samples. |
kevin1990 | 7:4dbae381f693 | 459 | * @param[in] nRequested Number of requested data samples. |
kevin1990 | 7:4dbae381f693 | 460 | * @param[out] pnReturned Number of valid data samples successfully retrieved. |
kevin1990 | 7:4dbae381f693 | 461 | * |
kevin1990 | 7:4dbae381f693 | 462 | * @return Status |
kevin1990 | 7:4dbae381f693 | 463 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 464 | * |
kevin1990 | 7:4dbae381f693 | 465 | * @details Reads the status registers and extracts the relevant information |
kevin1990 | 7:4dbae381f693 | 466 | * to return to the caller. |
kevin1990 | 7:4dbae381f693 | 467 | * |
kevin1990 | 7:4dbae381f693 | 468 | * @note This is intended to be called only when the DATAREADY status signal |
kevin1990 | 7:4dbae381f693 | 469 | * is asserted. |
kevin1990 | 7:4dbae381f693 | 470 | */ |
kevin1990 | 7:4dbae381f693 | 471 | ADI_SENSE_RESULT adi_sense_GetData( |
kevin1990 | 7:4dbae381f693 | 472 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 473 | ADI_SENSE_DATA_SAMPLE * const pSamples, |
kevin1990 | 7:4dbae381f693 | 474 | uint32_t const nRequested, |
kevin1990 | 7:4dbae381f693 | 475 | uint32_t * const pnReturned); |
kevin1990 | 7:4dbae381f693 | 476 | |
kevin1990 | 7:4dbae381f693 | 477 | /*! |
kevin1990 | 7:4dbae381f693 | 478 | * @brief Check if a command is currently running on the device. |
kevin1990 | 7:4dbae381f693 | 479 | * |
kevin1990 | 7:4dbae381f693 | 480 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 481 | * @param[out] pbCommandRunning Pointer to return the command running status |
kevin1990 | 7:4dbae381f693 | 482 | * |
kevin1990 | 7:4dbae381f693 | 483 | * @return Status |
kevin1990 | 7:4dbae381f693 | 484 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 485 | * |
kevin1990 | 7:4dbae381f693 | 486 | * @details Reads the device status register to check if a command is running. |
kevin1990 | 7:4dbae381f693 | 487 | */ |
kevin1990 | 7:4dbae381f693 | 488 | ADI_SENSE_RESULT adi_sense_GetCommandRunningState( |
kevin1990 | 7:4dbae381f693 | 489 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 490 | bool_t *pbCommandRunning); |
kevin1990 | 7:4dbae381f693 | 491 | |
kevin1990 | 7:4dbae381f693 | 492 | /*! |
kevin1990 | 7:4dbae381f693 | 493 | * @brief Get the number of samples available when DATAREADY status is asserted. |
kevin1990 | 7:4dbae381f693 | 494 | * |
kevin1990 | 7:4dbae381f693 | 495 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 496 | * @param[out] peOperatingMode Pointer to return the configured operating mode |
kevin1990 | 7:4dbae381f693 | 497 | * @param[out] peDataPublishMode Pointer to return the configured data publishing mode |
kevin1990 | 7:4dbae381f693 | 498 | * @param[out] pnSamplesPerDataready Pointer to return the calculated number of samples |
kevin1990 | 7:4dbae381f693 | 499 | * available when DATAREADY is asserted |
kevin1990 | 7:4dbae381f693 | 500 | * @param[out] pnSamplesPerCycle Pointer to return the calculated number of samples |
kevin1990 | 7:4dbae381f693 | 501 | * produced per measurement cycle |
kevin1990 | 7:4dbae381f693 | 502 | * |
kevin1990 | 7:4dbae381f693 | 503 | * @return Status |
kevin1990 | 7:4dbae381f693 | 504 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 505 | * |
kevin1990 | 7:4dbae381f693 | 506 | * @details Examines the current configuration settings in the device registers |
kevin1990 | 7:4dbae381f693 | 507 | * to calculate the number of samples available whenever the DATAREADY |
kevin1990 | 7:4dbae381f693 | 508 | * signal is asserted, along with other related information. This may |
kevin1990 | 7:4dbae381f693 | 509 | * be used to allocate buffers to store samples and to determine how |
kevin1990 | 7:4dbae381f693 | 510 | * many samples to retrieve whenever the DATAREADY status is asserted. |
kevin1990 | 7:4dbae381f693 | 511 | */ |
kevin1990 | 7:4dbae381f693 | 512 | ADI_SENSE_RESULT adi_sense_GetDataPublishingInfo( |
kevin1990 | 7:4dbae381f693 | 513 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 514 | ADI_SENSE_OPERATING_MODE * const peOperatingMode, |
kevin1990 | 7:4dbae381f693 | 515 | ADI_SENSE_DATA_PUBLISH_MODE * const peDataPublishMode, |
kevin1990 | 7:4dbae381f693 | 516 | uint32_t * const pnSamplesPerDataready, |
kevin1990 | 7:4dbae381f693 | 517 | uint32_t * const pnSamplesPerCycle); |
kevin1990 | 7:4dbae381f693 | 518 | |
kevin1990 | 7:4dbae381f693 | 519 | |
kevin1990 | 7:4dbae381f693 | 520 | /****************************************************************************** |
kevin1990 | 7:4dbae381f693 | 521 | * ADI Sense Low-Level API function prototypes |
kevin1990 | 7:4dbae381f693 | 522 | *****************************************************************************/ |
kevin1990 | 7:4dbae381f693 | 523 | |
kevin1990 | 7:4dbae381f693 | 524 | /*! |
kevin1990 | 7:4dbae381f693 | 525 | * @brief Read one or more device registers at the specified register address. |
kevin1990 | 7:4dbae381f693 | 526 | * |
kevin1990 | 7:4dbae381f693 | 527 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 528 | * @param[in] nAddress Register map address to read from |
kevin1990 | 7:4dbae381f693 | 529 | * @param[out] pData Pointer to return the register map data |
kevin1990 | 7:4dbae381f693 | 530 | * @param[in] nLength Number of bytes of data to read from the register map |
kevin1990 | 7:4dbae381f693 | 531 | * |
kevin1990 | 7:4dbae381f693 | 532 | * @return Status |
kevin1990 | 7:4dbae381f693 | 533 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 534 | * |
kevin1990 | 7:4dbae381f693 | 535 | * @details Provides direct byte-level read access to the device register map. |
kevin1990 | 7:4dbae381f693 | 536 | * The size and format of the register(s) must be known. |
kevin1990 | 7:4dbae381f693 | 537 | * |
kevin1990 | 7:4dbae381f693 | 538 | * @note Reads from special "keyhole" or "FIFO" registers will be handled |
kevin1990 | 7:4dbae381f693 | 539 | * according to documentation for those registers. |
kevin1990 | 7:4dbae381f693 | 540 | */ |
kevin1990 | 7:4dbae381f693 | 541 | ADI_SENSE_RESULT adi_sense_ReadRegister( |
kevin1990 | 7:4dbae381f693 | 542 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 543 | uint16_t const nAddress, |
kevin1990 | 7:4dbae381f693 | 544 | void * const pData, |
kevin1990 | 7:4dbae381f693 | 545 | unsigned const nLength); |
kevin1990 | 7:4dbae381f693 | 546 | |
kevin1990 | 7:4dbae381f693 | 547 | /*! |
kevin1990 | 7:4dbae381f693 | 548 | * @brief Write one or more device registers at the specified register address. |
kevin1990 | 7:4dbae381f693 | 549 | * |
kevin1990 | 7:4dbae381f693 | 550 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 551 | * @param[in] nAddress Register map address to read from |
kevin1990 | 7:4dbae381f693 | 552 | * @param[out] pData Pointer to return the register map data |
kevin1990 | 7:4dbae381f693 | 553 | * @param[in] nLength Number of bytes of data to read from the register map |
kevin1990 | 7:4dbae381f693 | 554 | * |
kevin1990 | 7:4dbae381f693 | 555 | * @return Status |
kevin1990 | 7:4dbae381f693 | 556 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 557 | * |
kevin1990 | 7:4dbae381f693 | 558 | * @details Provides direct byte-level write access to the device register map. |
kevin1990 | 7:4dbae381f693 | 559 | * The size and format of the register(s) must be known. |
kevin1990 | 7:4dbae381f693 | 560 | * |
kevin1990 | 7:4dbae381f693 | 561 | * @note Writes to read-only registers will be ignored by the device. |
kevin1990 | 7:4dbae381f693 | 562 | * @note Writes to special "keyhole" registers will be handled according to |
kevin1990 | 7:4dbae381f693 | 563 | * documentation for those registers. |
kevin1990 | 7:4dbae381f693 | 564 | */ |
kevin1990 | 7:4dbae381f693 | 565 | ADI_SENSE_RESULT adi_sense_WriteRegister( |
kevin1990 | 7:4dbae381f693 | 566 | ADI_SENSE_DEVICE_HANDLE const hDevice, |
kevin1990 | 7:4dbae381f693 | 567 | uint16_t const nAddress, |
kevin1990 | 7:4dbae381f693 | 568 | void * const pData, |
kevin1990 | 7:4dbae381f693 | 569 | unsigned const nLength); |
kevin1990 | 7:4dbae381f693 | 570 | |
kevin1990 | 7:4dbae381f693 | 571 | /*! |
kevin1990 | 7:4dbae381f693 | 572 | * @brief Update power configuration settings on the device. |
kevin1990 | 7:4dbae381f693 | 573 | * |
kevin1990 | 7:4dbae381f693 | 574 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 575 | * @param[in] pPowerConfig Power configuration details |
kevin1990 | 7:4dbae381f693 | 576 | * |
kevin1990 | 7:4dbae381f693 | 577 | * @return Status |
kevin1990 | 7:4dbae381f693 | 578 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 579 | * |
kevin1990 | 7:4dbae381f693 | 580 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 581 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 582 | * |
kevin1990 | 7:4dbae381f693 | 583 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 584 | */ |
kevin1990 | 7:4dbae381f693 | 585 | ADI_SENSE_RESULT adi_sense_SetPowerConfig( |
kevin1990 | 7:4dbae381f693 | 586 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 587 | ADI_SENSE_POWER_CONFIG *pPowerConfig); |
kevin1990 | 7:4dbae381f693 | 588 | |
kevin1990 | 7:4dbae381f693 | 589 | /*! |
kevin1990 | 7:4dbae381f693 | 590 | * @brief Update measurement configuration settings on the device. |
kevin1990 | 7:4dbae381f693 | 591 | * |
kevin1990 | 7:4dbae381f693 | 592 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 593 | * @param[in] pMeasurementConfig Measurement configuration details |
kevin1990 | 7:4dbae381f693 | 594 | * |
kevin1990 | 7:4dbae381f693 | 595 | * @return Status |
kevin1990 | 7:4dbae381f693 | 596 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 597 | * |
kevin1990 | 7:4dbae381f693 | 598 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 599 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 600 | * |
kevin1990 | 7:4dbae381f693 | 601 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 602 | */ |
kevin1990 | 7:4dbae381f693 | 603 | ADI_SENSE_RESULT adi_sense_SetMeasurementConfig( |
kevin1990 | 7:4dbae381f693 | 604 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 605 | ADI_SENSE_MEASUREMENT_CONFIG *pMeasurementConfig); |
kevin1990 | 7:4dbae381f693 | 606 | |
kevin1990 | 7:4dbae381f693 | 607 | /*! |
kevin1990 | 7:4dbae381f693 | 608 | * @brief Update diagnostics configuration settings on the device. |
kevin1990 | 7:4dbae381f693 | 609 | * |
kevin1990 | 7:4dbae381f693 | 610 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 611 | * @param[in] pDiagnosticsConfig Diagnostics configuration details |
kevin1990 | 7:4dbae381f693 | 612 | * |
kevin1990 | 7:4dbae381f693 | 613 | * @return Status |
kevin1990 | 7:4dbae381f693 | 614 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 615 | * |
kevin1990 | 7:4dbae381f693 | 616 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 617 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 618 | * |
kevin1990 | 7:4dbae381f693 | 619 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 620 | */ |
kevin1990 | 7:4dbae381f693 | 621 | ADI_SENSE_RESULT adi_sense_SetDiagnosticsConfig( |
kevin1990 | 7:4dbae381f693 | 622 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 623 | ADI_SENSE_DIAGNOSTICS_CONFIG *pDiagnosticsConfig); |
kevin1990 | 7:4dbae381f693 | 624 | |
kevin1990 | 7:4dbae381f693 | 625 | /*! |
kevin1990 | 7:4dbae381f693 | 626 | * @brief Update channel configuration settings for a specific channel. |
kevin1990 | 7:4dbae381f693 | 627 | * |
kevin1990 | 7:4dbae381f693 | 628 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 629 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 630 | * @param[in] pChannelConfig Channel configuration details |
kevin1990 | 7:4dbae381f693 | 631 | * |
kevin1990 | 7:4dbae381f693 | 632 | * @return Status |
kevin1990 | 7:4dbae381f693 | 633 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 634 | * |
kevin1990 | 7:4dbae381f693 | 635 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 636 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 637 | * Allows individual channel configuration details to be dynamically |
kevin1990 | 7:4dbae381f693 | 638 | * adjusted without rewriting the full device configuration. |
kevin1990 | 7:4dbae381f693 | 639 | * |
kevin1990 | 7:4dbae381f693 | 640 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 641 | */ |
kevin1990 | 7:4dbae381f693 | 642 | ADI_SENSE_RESULT adi_sense_SetChannelConfig( |
kevin1990 | 7:4dbae381f693 | 643 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 644 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 645 | ADI_SENSE_CHANNEL_CONFIG *pChannelConfig); |
kevin1990 | 7:4dbae381f693 | 646 | |
kevin1990 | 7:4dbae381f693 | 647 | /*! |
kevin1990 | 7:4dbae381f693 | 648 | * @brief Update number of measurements-per-cycle for a specific channel. |
kevin1990 | 7:4dbae381f693 | 649 | * |
kevin1990 | 7:4dbae381f693 | 650 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 651 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 652 | * @param[in] nMeasurementsPerCycle Specifies the number of measurements to be |
kevin1990 | 7:4dbae381f693 | 653 | * obtained from this channel in each |
kevin1990 | 7:4dbae381f693 | 654 | * measurement cycle. Set as 0 to disable the |
kevin1990 | 7:4dbae381f693 | 655 | * channel (omit from measurement cycle). |
kevin1990 | 7:4dbae381f693 | 656 | * |
kevin1990 | 7:4dbae381f693 | 657 | * @return Status |
kevin1990 | 7:4dbae381f693 | 658 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 659 | * |
kevin1990 | 7:4dbae381f693 | 660 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 661 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 662 | * Allows individual channels to be dynamically enabled/disabled, and |
kevin1990 | 7:4dbae381f693 | 663 | * measurements-per-cycle to be adjusted. |
kevin1990 | 7:4dbae381f693 | 664 | * |
kevin1990 | 7:4dbae381f693 | 665 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 666 | */ |
kevin1990 | 7:4dbae381f693 | 667 | ADI_SENSE_RESULT adi_sense_SetChannelCount( |
kevin1990 | 7:4dbae381f693 | 668 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 669 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 670 | uint32_t nMeasurementsPerCycle); |
kevin1990 | 7:4dbae381f693 | 671 | |
kevin1990 | 7:4dbae381f693 | 672 | /*! |
kevin1990 | 7:4dbae381f693 | 673 | * @brief Update the measurement threshold limits for a specified channel. |
kevin1990 | 7:4dbae381f693 | 674 | * |
kevin1990 | 7:4dbae381f693 | 675 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 676 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 677 | * @param[in] highThresholdLimit Optional maximum threshold value for each |
kevin1990 | 7:4dbae381f693 | 678 | * processed sample, to be checked prior to |
kevin1990 | 7:4dbae381f693 | 679 | * publishing. A channel ALERT condition is |
kevin1990 | 7:4dbae381f693 | 680 | * raised if the processed value is higher than |
kevin1990 | 7:4dbae381f693 | 681 | * this threshold. Set to NaN if not required. |
kevin1990 | 7:4dbae381f693 | 682 | * @param[in] lowThresholdLimit Optional minimum threshold value for each |
kevin1990 | 7:4dbae381f693 | 683 | * processed sample, to be checked prior to |
kevin1990 | 7:4dbae381f693 | 684 | * publishing. A channel ALERT condition is |
kevin1990 | 7:4dbae381f693 | 685 | * raised if the processed value is lower than |
kevin1990 | 7:4dbae381f693 | 686 | * this threshold. Set to NaN if not required. |
kevin1990 | 7:4dbae381f693 | 687 | * |
kevin1990 | 7:4dbae381f693 | 688 | * @return Status |
kevin1990 | 7:4dbae381f693 | 689 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 690 | * |
kevin1990 | 7:4dbae381f693 | 691 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 692 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 693 | * Allows individual channel thresholds to be dynamically adjusted. |
kevin1990 | 7:4dbae381f693 | 694 | * |
kevin1990 | 7:4dbae381f693 | 695 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 696 | */ |
kevin1990 | 7:4dbae381f693 | 697 | ADI_SENSE_RESULT adi_sense_SetChannelThresholdLimits( |
kevin1990 | 7:4dbae381f693 | 698 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 699 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 700 | float32_t highThresholdLimit, |
kevin1990 | 7:4dbae381f693 | 701 | float32_t lowThresholdLimit); |
kevin1990 | 7:4dbae381f693 | 702 | |
kevin1990 | 7:4dbae381f693 | 703 | /*! |
kevin1990 | 7:4dbae381f693 | 704 | * @brief Update the extra settling time for a specified channel. |
kevin1990 | 7:4dbae381f693 | 705 | * |
kevin1990 | 7:4dbae381f693 | 706 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 707 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 708 | * @param[in] settlingTime A minimum settling time is applied internally for |
kevin1990 | 7:4dbae381f693 | 709 | * each channel, based on the sensor type. However, |
kevin1990 | 7:4dbae381f693 | 710 | * additional settling time (microseconds) can |
kevin1990 | 7:4dbae381f693 | 711 | * optionally be specified here. Set to 0 if not |
kevin1990 | 7:4dbae381f693 | 712 | * required. |
kevin1990 | 7:4dbae381f693 | 713 | * |
kevin1990 | 7:4dbae381f693 | 714 | * @return Status |
kevin1990 | 7:4dbae381f693 | 715 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 716 | * |
kevin1990 | 7:4dbae381f693 | 717 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 718 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 719 | * Allows individual channel settling times to be dynamically adjusted. |
kevin1990 | 7:4dbae381f693 | 720 | * |
kevin1990 | 7:4dbae381f693 | 721 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 722 | */ |
kevin1990 | 7:4dbae381f693 | 723 | ADI_SENSE_RESULT adi_sense_SetChannelSettlingTime( |
kevin1990 | 7:4dbae381f693 | 724 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 725 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 726 | uint32_t settlingTime); |
kevin1990 | 7:4dbae381f693 | 727 | |
kevin1990 | 7:4dbae381f693 | 728 | /*! |
kevin1990 | 7:4dbae381f693 | 729 | * @brief Update configuration settings for a specific ADC analog channel. |
kevin1990 | 7:4dbae381f693 | 730 | * |
kevin1990 | 7:4dbae381f693 | 731 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 732 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 733 | * @param[in] pAdcChannelConfig ADC analog channel configuration details |
kevin1990 | 7:4dbae381f693 | 734 | * |
kevin1990 | 7:4dbae381f693 | 735 | * @return Status |
kevin1990 | 7:4dbae381f693 | 736 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 737 | * |
kevin1990 | 7:4dbae381f693 | 738 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 739 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 740 | * Allows individual channel configuration details to be dynamically |
kevin1990 | 7:4dbae381f693 | 741 | * adjusted without rewriting the full device configuration. |
kevin1990 | 7:4dbae381f693 | 742 | * |
kevin1990 | 7:4dbae381f693 | 743 | * @note Applicable only to ADC analog sensor channels |
kevin1990 | 7:4dbae381f693 | 744 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 745 | */ |
kevin1990 | 7:4dbae381f693 | 746 | ADI_SENSE_RESULT adi_sense_SetAdcChannelConfig( |
kevin1990 | 7:4dbae381f693 | 747 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 748 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 749 | ADI_SENSE_CHANNEL_CONFIG *pAdcChannelConfig); |
kevin1990 | 7:4dbae381f693 | 750 | |
kevin1990 | 7:4dbae381f693 | 751 | /*! |
kevin1990 | 7:4dbae381f693 | 752 | * @brief Update configuration settings for a specific I2C digital channel. |
kevin1990 | 7:4dbae381f693 | 753 | * |
kevin1990 | 7:4dbae381f693 | 754 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 755 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 756 | * @param[in] pI2cChannelConfig I2C digital channel configuration details |
kevin1990 | 7:4dbae381f693 | 757 | * |
kevin1990 | 7:4dbae381f693 | 758 | * @return Status |
kevin1990 | 7:4dbae381f693 | 759 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 760 | * |
kevin1990 | 7:4dbae381f693 | 761 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 762 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 763 | * Allows individual channel configuration details to be dynamically |
kevin1990 | 7:4dbae381f693 | 764 | * adjusted without rewriting the full device configuration. |
kevin1990 | 7:4dbae381f693 | 765 | * |
kevin1990 | 7:4dbae381f693 | 766 | * @note Applicable only to I2C digital sensor channels |
kevin1990 | 7:4dbae381f693 | 767 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 768 | */ |
kevin1990 | 7:4dbae381f693 | 769 | ADI_SENSE_RESULT adi_sense_SetI2cChannelConfig( |
kevin1990 | 7:4dbae381f693 | 770 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 771 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 772 | ADI_SENSE_I2C_CHANNEL_CONFIG *pI2cChannelConfig); |
kevin1990 | 7:4dbae381f693 | 773 | |
kevin1990 | 7:4dbae381f693 | 774 | |
kevin1990 | 7:4dbae381f693 | 775 | /*! |
kevin1990 | 7:4dbae381f693 | 776 | * @brief Update configuration settings for a specific SPI digital channel. |
kevin1990 | 7:4dbae381f693 | 777 | * |
kevin1990 | 7:4dbae381f693 | 778 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 779 | * @param[in] eChannelId Selects the channel to be updated |
kevin1990 | 7:4dbae381f693 | 780 | * @param[in] pSpiChannelConfig SPI digital channel configuration details |
kevin1990 | 7:4dbae381f693 | 781 | * |
kevin1990 | 7:4dbae381f693 | 782 | * @return Status |
kevin1990 | 7:4dbae381f693 | 783 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 784 | * |
kevin1990 | 7:4dbae381f693 | 785 | * @details Translates configuration details provided into device-specific |
kevin1990 | 7:4dbae381f693 | 786 | * register settings and updates device configuration registers. |
kevin1990 | 7:4dbae381f693 | 787 | * Allows individual channel configuration details to be dynamically |
kevin1990 | 7:4dbae381f693 | 788 | * adjusted without rewriting the full device configuration. |
kevin1990 | 7:4dbae381f693 | 789 | * |
kevin1990 | 7:4dbae381f693 | 790 | * @note Applicable only to SPI digital sensor channels |
kevin1990 | 7:4dbae381f693 | 791 | * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called |
kevin1990 | 7:4dbae381f693 | 792 | */ |
kevin1990 | 7:4dbae381f693 | 793 | ADI_SENSE_RESULT adi_sense_SetSpiChannelConfig( |
kevin1990 | 7:4dbae381f693 | 794 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 795 | ADI_SENSE_CHANNEL_ID eChannelId, |
kevin1990 | 7:4dbae381f693 | 796 | ADI_SENSE_SPI_CHANNEL_CONFIG *pSpiChannelConfig); |
kevin1990 | 7:4dbae381f693 | 797 | |
kevin1990 | 7:4dbae381f693 | 798 | /*! |
kevin1990 | 7:4dbae381f693 | 799 | * @brief Read the contents of the ADI Sense internal calibration table |
kevin1990 | 7:4dbae381f693 | 800 | * |
kevin1990 | 7:4dbae381f693 | 801 | * Calibration coefficients/gains/offsets are stored internally in a 2D table of |
kevin1990 | 7:4dbae381f693 | 802 | * 32-bit floating point values. Refer to product documentation for details of |
kevin1990 | 7:4dbae381f693 | 803 | * the rows and columns. |
kevin1990 | 7:4dbae381f693 | 804 | * |
kevin1990 | 7:4dbae381f693 | 805 | * @param[in] hDevice ADI Sense device context handle |
kevin1990 | 7:4dbae381f693 | 806 | * @param[in] buffer Pointer to destination buffer for the calibration data |
kevin1990 | 7:4dbae381f693 | 807 | * @param[in] maxLen The buffer capacity in bytes (e.g. 672 for 56x3 table) |
kevin1990 | 7:4dbae381f693 | 808 | * @param[out] dataLen The number of bytes written to the buffer |
kevin1990 | 7:4dbae381f693 | 809 | * @param[out] nRows Pointer to return the number of table rows (e.g. 56) |
kevin1990 | 7:4dbae381f693 | 810 | * @param[out] nColums Pointer to return the number of table columns (e.g. 3) |
kevin1990 | 7:4dbae381f693 | 811 | * |
kevin1990 | 7:4dbae381f693 | 812 | * @return Status |
kevin1990 | 7:4dbae381f693 | 813 | * - #ADI_SENSE_SUCCESS Call completed successfully. |
kevin1990 | 7:4dbae381f693 | 814 | * - #ADI_SENSE_FAILURE |
kevin1990 | 7:4dbae381f693 | 815 | * - #ADI_SENSE_INVALID_OPERATION Invalid register identifier. |
kevin1990 | 7:4dbae381f693 | 816 | */ |
kevin1990 | 7:4dbae381f693 | 817 | ADI_SENSE_RESULT adi_sense_ReadCalTable( |
kevin1990 | 7:4dbae381f693 | 818 | ADI_SENSE_DEVICE_HANDLE hDevice, |
kevin1990 | 7:4dbae381f693 | 819 | float *buffer, |
kevin1990 | 7:4dbae381f693 | 820 | unsigned maxLen, |
kevin1990 | 7:4dbae381f693 | 821 | unsigned *dataLen, |
kevin1990 | 7:4dbae381f693 | 822 | unsigned *nRows, |
kevin1990 | 7:4dbae381f693 | 823 | unsigned *nColumns); |
kevin1990 | 7:4dbae381f693 | 824 | |
kevin1990 | 7:4dbae381f693 | 825 | #ifdef __cplusplus |
kevin1990 | 7:4dbae381f693 | 826 | } |
kevin1990 | 7:4dbae381f693 | 827 | #endif |
kevin1990 | 7:4dbae381f693 | 828 | |
kevin1990 | 7:4dbae381f693 | 829 | /*! |
kevin1990 | 7:4dbae381f693 | 830 | * @} |
kevin1990 | 7:4dbae381f693 | 831 | */ |
kevin1990 | 7:4dbae381f693 | 832 | |
kevin1990 | 7:4dbae381f693 | 833 | #endif /* __ADI_SENSE_API_H__ */ |
kevin1990 | 7:4dbae381f693 | 834 |