Diff: GPRS/GPRS.h

Revision:

0:8ccbd963e74d

Child:

1:7298a7950f65

diff -r 000000000000 -r 8ccbd963e74d GPRS/GPRS.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/GPRS/GPRS.h	Tue Feb 25 02:52:48 2014 +0000
@@ -0,0 +1,155 @@
+/*
+  GPRS.h
+  2014 Copyright (c) Seeed Technology Inc.  All right reserved.
+
+  Author:lawliet zou(lawliet.zou@gmail.com)
+  2014-2-24
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef __GPRS_H__
+#define __GPRS_H__
+
+#include "mbed.h"
+#include "modem.h"
+
+#define DEFAULT_WAIT_RESP_TIMEOUT 500
+#define MAX_SOCK_NUM 7 //(0~6)
+
+enum Protocol {
+    CLOSED = 0,
+    TCP    = 1,
+    UDP    = 2,
+};
+
+class GPRS: public Modem
+{
+
+public:
+    /**	Constructor
+     *	@param tx mbed pin to use for tx line of Serial interface
+     * 	@param rx mbed pin to use for rx line of Serial interface
+     * 	@param baudRate serial communicate baud rate
+     * 	@param apn name of the gateway for GPRS to connect to the network
+     * 	@param userName apn's username, usually is NULL
+     * 	@param passWord apn's password, usually is NULL
+     */
+    GPRS(PinName tx, PinName rx, int baudRate, const char* apn, const char* userName = NULL, const char *passWord = NULL);
+
+    /**	Connect the GPRS module to the network.
+     * 	@return true if connected, false otherwise
+     */
+    bool join(void);
+
+    /** Disconnect the GPRS module from the network
+     * 	@returns true if successful
+     */
+    bool disconnect(void);
+
+    /** Open a tcp/udp connection with the specified host on the specified port
+     * 	@param socket an endpoint of an inter-process communication flow of GPRS module,for SIM900 module, it is in [0,6]
+     * 	@param ptl protocol for socket, TCP/UDP can be choosen
+     * 	@param host host (can be either an ip address or a name. If a name is provided, a dns request will be established)
+     * 	@param port port
+     * 	@param timeout wait seconds till connected
+     * 	@returns true if successful
+     */
+    bool connect(int socket, Protocol ptl, const char * host, int port, int timeout = DEFAULT_TIMEOUT);
+
+    /** Set the protocol (UDP or TCP)
+     * 	@param socket socket
+     * 	@param p protocol
+     * 	@returns true if successful
+     */
+    bool setProtocol(int socket, Protocol p);
+
+    /** Reset the GPRS module
+     */
+    void reset();
+
+    /**	check if GPRS module is readable or not
+     *	@returns true if readable
+     */
+    bool readable(void);
+
+    /**	wait a few time to check if GPRS module is readable or not
+     *	@param socket socket
+     *	@param wait_time time of waiting
+     */
+    int wait_readable(int socket, int wait_time);
+
+    /**	wait a few time to check if GPRS module is writeable or not
+     *	@param socket socket
+     *	@param wait_time time of waiting
+     */
+    int wait_writeable(int socket, int req_size);
+
+    /** Check if a tcp link is active
+     * 	@returns true if successful
+     */
+    bool is_connected(int socket);
+
+    /** Close a tcp connection
+     * 	@returns true if successful
+     */
+    bool close(int socket);
+
+    /** send data to socket
+     *	@param socket socket
+     *	@param str string to be sent
+     * 	@param len string length
+     * 	@returns return bytes that actually been send
+     */
+    int send(int socket, const char * str, int len);
+
+    /** read data from socket
+     * 	@param socket socket
+     *	@param buf buffer that will store the data read from socket
+     *	@param len string length need to read from socket
+     *	@returns bytes that actually read
+     */
+    int recv(int socket, char* buf, int len);
+
+    /** convert the host to ip
+     *  @param host host ip string, ex. 10.11.12.13
+     *  @param ip long int ip address, ex. 0x11223344
+     *  @returns true if successful
+     */
+    bool gethostbyname(const char* host, uint32_t* ip);
+
+    /** get instance of GPRS class
+     */
+    static GPRS* getInstance() {
+        return inst;
+    };
+
+    int new_socket();
+    uint16_t new_port();
+    uint32_t _ip;
+
+protected:
+
+    bool preInit();
+    bool checkSIMStatus(void);
+    uint32_t str_to_ip(const char* str);
+    static GPRS* inst;
+    int socketID;
+    const char* _apn;
+    const char* _userName;
+    const char* _passWord;
+};
+
+#endif