Diff: main.cpp

Revision:

26:6aa294d83af4

Parent:

25:fbf7d44e7da4

Child:

27:922f53fa649c

diff -r fbf7d44e7da4 -r 6aa294d83af4 main.cpp
--- a/main.cpp	Wed Apr 20 03:36:48 2016 +0000
+++ b/main.cpp	Wed Apr 20 16:47:28 2016 +0000
@@ -179,10 +179,10 @@
 char    gpslon = 'N';
 
 
-float home_lat  = 40.580508;
-float home_lon  = -105.081823;
-float work_lat  = 40.594062; //40.569136;
-float work_lon  = -105.075683; //-105.081966;
+float home_lat  = 40.00000;    //40.580508;
+float home_lon  = -105.000000; //-105.081823;
+float work_lat  = 40.100000;   //40.594062; //40.569136;
+float work_lon  = -105.100000; //-105.075683; //-105.081966;
 int location = 0;
 
 float homeDistance = 99999;
@@ -600,7 +600,7 @@
     
 
     if(bVolt > 1750 && amps > 8191) {
-        RGB_LED.set_led(0,1,0);
+               RGB_LED.set_led(0,1,0); 
     } else if(amps > 8191 && (RTC_UPAS.hour >=20 || bVolt < 1500)) {
         if(ledOn) {
             RGB_LED.set_led(0,0,0);
@@ -717,11 +717,10 @@
     pc.printf("\f\n\r-------------Startup-------------\n\r");
     wait(0.5);
     
-    
-    uint8_t serialNumberAndType[6] = {0x50,0x53,};
+   uint8_t serialNumberAndType[6] = {0x50,0x53,}; //ex) PS0018 // 0x50,0x53 <- ASCII 80 + 83 (PS) //0x4d,0x53 <- ASCII  + 83 (MS) 
     
     E2PROM.read(0x00034,serialNumberAndType+2,2);
-   
+    
     int tempSerialNum = serialNumberAndType[2]+serialNumberAndType[3];
     int serialNumDigits[4];
     serialNumDigits[0] = tempSerialNum / 1000 % 10;
@@ -734,6 +733,7 @@
     serialNumberAndType[4] = serialNumDigits[2]+48;
     serialNumberAndType[5] = serialNumDigits[3]+48;
     
+   
     RGB_LED.set_led(0,1,0);
     
     pc.attach(pc_recv);
@@ -753,7 +753,7 @@
     RGB_LED.set_led(1,1,1);
     while(runReady!=1) {
         wait(1);
-        pc.printf("Waiting for BLE instruction");
+        pc.printf("Waiting for BLE instruction\r\n");
     
     }
     
@@ -761,6 +761,31 @@
     E2PROM.read(0x00015, startAndEndTime, 12); //Grab start and end times from EEPROM
     RGB_LED.set_led(0,1,0);
     
+    
+    //Pull MicroEnviornment Lat/Lons from EEPROM
+    // Latitude School EEPROM = 0x50-0x53
+    // Longitude School EEPROM = 0x54-0x57
+    // Latitude Home EEPROM = 0x58-0x5B
+    // Longitude Home EEPROM = 0x5C-0x5F
+    
+    uint8_t workLat[4] = {0,};
+    E2PROM.read(0x00050,workLat,4);
+    E2PROM.byteToFloat(workLat, &work_lat);
+    
+    uint8_t workLon[4] = {0,};
+    E2PROM.read(0x00054,workLon,4);
+    E2PROM.byteToFloat(workLon, &work_lon);
+    
+    uint8_t homeLat[4] = {0,};
+    E2PROM.read(0x00058,homeLat,4);
+    E2PROM.byteToFloat(homeLat, &home_lat);
+    
+    uint8_t homeLon[4] = {0,};
+    E2PROM.read(0x0005C,homeLon,4);
+    E2PROM.byteToFloat(homeLon, &home_lon);
+    
+    pc.printf("%f,%f\r\n%f,%f\r\n", home_lat, home_lon, work_lat, work_lon);
+    
     //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
     //UPDATE THIS TO WORK WITH ST RTC INSTEAD
     //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!