File content as of revision 5:1fe35a74799a:

#include "mbed.h"
#include "MMA8451Q8g.h"
#include "SLCD.h"

#define BLINKTIME   0.7
#define RELAYON     0
#define RELAYOFF    1
#define LEDDELAY    0.75
#define WAITDELAY   0.7
#define LCDLEN      10

#define REG_WHO_AM_I      0x0D
#define XYZ_DATA_CFG      0x0E

#define REG_OUT_X_MSB     0x01
#define REG_OUT_Y_MSB     0x03
#define REG_OUT_Z_MSB     0x05
#define REG_PULSE_CFG     0x21
#define REG_PULSE_SRC     0x22
#define REG_PULSE_THSZ    0x25
#define REG_CTRL_4        0x2D
#define REG_CTRL_5        0x2E

#define MAX_2G            0x00
#define MAX_4G            0x01
#define MAX_8G            0x02
#define SET_INTERRUPT     0x08
#define SET_INT_LINE      0x08


//#define PRINTDBUG
// Accelerometer SPI pins
#if   defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
  PinName const SDA = PTE25;
  PinName const SCL = PTE24;
#elif defined (TARGET_KL05Z)
  PinName const SDA = PTB4;
  PinName const SCL = PTB3;
#else
  #error TARGET NOT DEFINED
#endif

#define MMA8451_I2C_ADDRESS (0x1d<<1)
 
Ticker ledBlink; // timinginterrupt for RED led
//InterruptIn mybutton(PTC3);  //push botton with internal pullup
InterruptIn MMA8451QInt1(PTC5);  //push botton with internal pullup
DigitalOut myled(LED_RED); // red led
DigitalOut relay(LED_GREEN); // green led

 MMA8451Q acc(SDA, SCL, MMA8451_I2C_ADDRESS);
 
float delay = WAITDELAY;
int relayState = RELAYOFF;
int outState = false;
SLCD slcd; //define LCD display
char LCDMessages[2][LCDLEN] = {"TRUE", "FALS"};


void LCDMess(char *lMess, float dWait){
        slcd.Home();
        slcd.clear();
        slcd.printf(lMess);
        wait(dWait);
} 
void LCDMessNoDwell(char *lMess){
        slcd.Home();
        slcd.clear();
        slcd.printf(lMess);
} 


void LEDBlinker(){  // RED LED interrupt
    outState = !outState; 
    myled.write(outState);
}

void GreenLEDBlinker(){  // Green LED interrupt
    relayState = !relayState; 
    relay.write(relayState);
}
        

int main()
{
    uint8_t regData = MAX_4G; 
    uint8_t latchData = 0x40; //0b01000000; //for pulse config register
    uint8_t axisData = 0x10; //0b00010000;
    uint8_t interrupt1Data = 0x08; //0b00001000;
    uint8_t interrupt2Data = 0x04; //0b00000100;
    char lcdData[LCDLEN];
    
    myled.write(outState);
    relay.write(relayState);
    
// set up interrrupts to be used later for taps
    MMA8451QInt1.rise(&GreenLEDBlinker);
    MMA8451QInt1.mode(PullNone);
   
// set up interrrupts to be used later for taps
//    mybutton.fall(&pressed);
    ledBlink.attach(&LEDBlinker, LEDDELAY);
        
// Check to see if accerlometer is alive and well
    acc.setGLimit(MAX_2G); // For now set to 2g
    acc.readRegs(XYZ_DATA_CFG, &regData, 1);
    sprintf (lcdData,"%x",regData); // Note displaying in hexidecimal
    LCDMess(lcdData,BLINKTIME);
    acc.readRegs(REG_WHO_AM_I, &regData, 1);
    sprintf (lcdData,"%x",regData);
    LCDMess(lcdData,BLINKTIME); 
    
    
// Set up (pulse) interrupt to INT1 pin
        regData = interrupt1Data;
        acc.setRegisterInStandby(REG_CTRL_4, regData); // write the data
        regData = interrupt2Data;
        acc.setRegisterInStandby(REG_CTRL_5, regData); // write the data
    
    while (true) { 

    // Read Pulse Source Data and check to see if things have been set
        acc.readRegs(REG_PULSE_CFG, &regData, 1);  // check it
        sprintf (lcdData,"%x",regData);
        LCDMess(lcdData,BLINKTIME); 
        
        regData = latchData | axisData;
        acc.setRegisterInStandby(REG_PULSE_CFG, regData); // write the data
        acc.readRegs(REG_PULSE_CFG, &regData, 1);  // check it
        sprintf (lcdData,"%x",regData);
        LCDMess(lcdData,BLINKTIME); 
                
        acc.readRegs(REG_PULSE_SRC, &regData, 1);
        sprintf (lcdData,"%x",regData);
        LCDMess(lcdData,BLINKTIME);        
        
        LCDMessNoDwell(LCDMessages[relayState]);  
        wait(delay);
    }
}