Stanley Cohen / Mbed 2 deprecated KL46z_single_tap_2017_blank

Blank parameters for midterm

Dependencies:   MMA8451Q8b SLCD mbed

KL46z_single_tap_2017.cpp@12:10e6d0d12833, 2017-03-09 (annotated)

Committer:
scohennm
Date:
Thu Mar 09 02:37:39 2017 +0000
Revision:
12:10e6d0d12833
Blank parameters for midterm

Who changed what in which revision?

UserRevisionLine numberNew contents of line
scohennm 12:10e6d0d12833 1 #include "mbed.h"
scohennm 12:10e6d0d12833 2 #include "MMA8451Q8g.h"
scohennm 12:10e6d0d12833 3 #include "SLCD.h"
scohennm 12:10e6d0d12833 4
scohennm 12:10e6d0d12833 5 #define BLINKTIME 1.5
scohennm 12:10e6d0d12833 6 #define RELAYON 0
scohennm 12:10e6d0d12833 7 #define RELAYOFF 1
scohennm 12:10e6d0d12833 8 #define LEDDELAY 0.4
scohennm 12:10e6d0d12833 9 #define WAITDELAY 0.7
scohennm 12:10e6d0d12833 10 #define LCDLEN 10
scohennm 12:10e6d0d12833 11
scohennm 12:10e6d0d12833 12 #define REG_WHO_AM_I 0x0D
scohennm 12:10e6d0d12833 13 #define XYZ_DATA_CFG 0x0E
scohennm 12:10e6d0d12833 14
scohennm 12:10e6d0d12833 15 #define REG_OUT_X_MSB 0x01
scohennm 12:10e6d0d12833 16 #define REG_OUT_Y_MSB 0x03
scohennm 12:10e6d0d12833 17 #define REG_OUT_Z_MSB 0x05
scohennm 12:10e6d0d12833 18 #define REG_PULSE_CFG 0x21
scohennm 12:10e6d0d12833 19 #define REG_PULSE_SRC 0x22
scohennm 12:10e6d0d12833 20 #define REG_PULSE_THSZ 0x25
scohennm 12:10e6d0d12833 21 #define REH_PULSE_TMLT 0x26
scohennm 12:10e6d0d12833 22 #define REG_CTRL_4 0x2D
scohennm 12:10e6d0d12833 23 #define REG_CTRL_5 0x2E
scohennm 12:10e6d0d12833 24
scohennm 12:10e6d0d12833 25 #define MAX_2G 0x00
scohennm 12:10e6d0d12833 26 #define MAX_4G 0x01
scohennm 12:10e6d0d12833 27 #define MAX_8G 0x02
scohennm 12:10e6d0d12833 28 /**************************************
scohennm 12:10e6d0d12833 29 You need to fill nn the missing numbers below for this to work
scohennm 12:10e6d0d12833 30 0x00 is just a place holder
scohennm 12:10e6d0d12833 31 *************************************/
scohennm 12:10e6d0d12833 32 #define LATCH_DATA 0x00 // for use in REG_PULSE_CFG
scohennm 12:10e6d0d12833 33 #define AXIS_DATA 0x00
scohennm 12:10e6d0d12833 34 #define SET_INTERRUPT 0x00 //using interrupt INT1 PTC5
scohennm 12:10e6d0d12833 35 #define SET_INT_LINE 0x00
scohennm 12:10e6d0d12833 36
scohennm 12:10e6d0d12833 37 #define SET_THZ 0x00 // See Table 49 in data sheet
scohennm 12:10e6d0d12833 38
scohennm 12:10e6d0d12833 39 #define SET_TMLT 0x00 // See Table 51 in data sheet
scohennm 12:10e6d0d12833 40 /*********************************************************/
scohennm 12:10e6d0d12833 41
scohennm 12:10e6d0d12833 42 //#define PRINTDBUG
scohennm 12:10e6d0d12833 43 // Accelerometer I2C pins
scohennm 12:10e6d0d12833 44 #if defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
scohennm 12:10e6d0d12833 45 PinName const SDA = PTE25;
scohennm 12:10e6d0d12833 46 PinName const SCL = PTE24;
scohennm 12:10e6d0d12833 47 #elif defined (TARGET_KL05Z)
scohennm 12:10e6d0d12833 48 PinName const SDA = PTB4;
scohennm 12:10e6d0d12833 49 PinName const SCL = PTB3;
scohennm 12:10e6d0d12833 50 #else
scohennm 12:10e6d0d12833 51 #error TARGET NOT DEFINED
scohennm 12:10e6d0d12833 52 #endif
scohennm 12:10e6d0d12833 53
scohennm 12:10e6d0d12833 54 #define MMA8451_I2C_ADDRESS (0x1d<<1)
scohennm 12:10e6d0d12833 55
scohennm 12:10e6d0d12833 56 Ticker ledBlink; // timinginterrupt for RED led
scohennm 12:10e6d0d12833 57 InterruptIn MMA8451QInt1(PTC5); //push botton with internal pullup
scohennm 12:10e6d0d12833 58 //InterruptIn MMA8451QInt1(PTD1);
scohennm 12:10e6d0d12833 59 DigitalOut myled(LED_RED); // red led
scohennm 12:10e6d0d12833 60 DigitalOut relay(LED_GREEN); // green led
scohennm 12:10e6d0d12833 61
scohennm 12:10e6d0d12833 62 MMA8451Q acc(SDA, SCL, MMA8451_I2C_ADDRESS);
scohennm 12:10e6d0d12833 63
scohennm 12:10e6d0d12833 64 float delay = WAITDELAY;
scohennm 12:10e6d0d12833 65 int relayState = RELAYOFF;
scohennm 12:10e6d0d12833 66 int outState = false;
scohennm 12:10e6d0d12833 67 SLCD slcd; //define LCD display
scohennm 12:10e6d0d12833 68 char LCDMessages[2][LCDLEN] = {"TRUE", "FALS"};
scohennm 12:10e6d0d12833 69
scohennm 12:10e6d0d12833 70
scohennm 12:10e6d0d12833 71 void LCDMess(char *lMess, float dWait){
scohennm 12:10e6d0d12833 72 slcd.Home();
scohennm 12:10e6d0d12833 73 slcd.clear();
scohennm 12:10e6d0d12833 74 slcd.printf(lMess);
scohennm 12:10e6d0d12833 75 wait(dWait);
scohennm 12:10e6d0d12833 76 }
scohennm 12:10e6d0d12833 77 void LCDMessNoDwell(char *lMess){
scohennm 12:10e6d0d12833 78 slcd.Home();
scohennm 12:10e6d0d12833 79 slcd.clear();
scohennm 12:10e6d0d12833 80 slcd.printf(lMess);
scohennm 12:10e6d0d12833 81 }
scohennm 12:10e6d0d12833 82
scohennm 12:10e6d0d12833 83 // Interrupt routines
scohennm 12:10e6d0d12833 84 void LEDBlinker(){ // RED LED interrupt
scohennm 12:10e6d0d12833 85 outState = !outState;
scohennm 12:10e6d0d12833 86 myled.write(outState);
scohennm 12:10e6d0d12833 87 }
scohennm 12:10e6d0d12833 88
scohennm 12:10e6d0d12833 89 void GreenLEDBlinker(){ // Green LED interrupt
scohennm 12:10e6d0d12833 90 //uint8_t i_regData;
scohennm 12:10e6d0d12833 91 relayState = !relayState;
scohennm 12:10e6d0d12833 92 relay.write(relayState);
scohennm 12:10e6d0d12833 93 //acc.readRegs(REG_PULSE_SRC, &i_regData, 1); // Clear the tap event
scohennm 12:10e6d0d12833 94 }
scohennm 12:10e6d0d12833 95
scohennm 12:10e6d0d12833 96 // end interrupt routines
scohennm 12:10e6d0d12833 97
scohennm 12:10e6d0d12833 98 int main()
scohennm 12:10e6d0d12833 99 {
scohennm 12:10e6d0d12833 100 uint8_t regData;
scohennm 12:10e6d0d12833 101
scohennm 12:10e6d0d12833 102
scohennm 12:10e6d0d12833 103 char lcdData[LCDLEN];
scohennm 12:10e6d0d12833 104
scohennm 12:10e6d0d12833 105 myled.write(outState);
scohennm 12:10e6d0d12833 106 relay.write(relayState);
scohennm 12:10e6d0d12833 107
scohennm 12:10e6d0d12833 108 // set up interrrupts to be used later for taps
scohennm 12:10e6d0d12833 109 MMA8451QInt1.rise(&GreenLEDBlinker);
scohennm 12:10e6d0d12833 110 MMA8451QInt1.mode(PullNone);
scohennm 12:10e6d0d12833 111
scohennm 12:10e6d0d12833 112 // set up interrrupts to be used later for taps
scohennm 12:10e6d0d12833 113 ledBlink.attach(&LEDBlinker, LEDDELAY);
scohennm 12:10e6d0d12833 114
scohennm 12:10e6d0d12833 115 // Read Pulse Source Data and check to see if things have been set
scohennm 12:10e6d0d12833 116 acc.readRegs(REG_PULSE_CFG, &regData, 1); // check it
scohennm 12:10e6d0d12833 117 sprintf (lcdData,"%x",regData);
scohennm 12:10e6d0d12833 118 LCDMess(lcdData,BLINKTIME);
scohennm 12:10e6d0d12833 119
scohennm 12:10e6d0d12833 120 // *********** Initialize for tap tecognition ***********
scohennm 12:10e6d0d12833 121 regData = LATCH_DATA | AXIS_DATA;
scohennm 12:10e6d0d12833 122 acc.setRegisterInStandby(REG_PULSE_CFG, regData); // write the data
scohennm 12:10e6d0d12833 123 acc.readRegs(REG_PULSE_CFG, &regData, 1); // check it
scohennm 12:10e6d0d12833 124 sprintf (lcdData,"%x",regData);
scohennm 12:10e6d0d12833 125 LCDMess(lcdData,BLINKTIME);
scohennm 12:10e6d0d12833 126
scohennm 12:10e6d0d12833 127 // Check to see if accerlometer is alive and well
scohennm 12:10e6d0d12833 128 acc.setGLimit(MAX_4G); // For now set to 2g
scohennm 12:10e6d0d12833 129 acc.readRegs(XYZ_DATA_CFG, &regData, 1);
scohennm 12:10e6d0d12833 130 sprintf (lcdData,"%x",regData); // Note displaying in hexidecimal
scohennm 12:10e6d0d12833 131 LCDMess(lcdData,BLINKTIME);
scohennm 12:10e6d0d12833 132
scohennm 12:10e6d0d12833 133 // Setup single-tap pulse prarameters.
scohennm 12:10e6d0d12833 134 acc.setRegisterInStandby(REG_PULSE_THSZ, SET_THZ); // write the data
scohennm 12:10e6d0d12833 135 acc.setRegisterInStandby(REH_PULSE_TMLT, SET_TMLT); // write the data
scohennm 12:10e6d0d12833 136
scohennm 12:10e6d0d12833 137 // Set up (pulse) interrupt to INT1 pin
scohennm 12:10e6d0d12833 138 acc.setRegisterInStandby(REG_CTRL_4, SET_INTERRUPT); // write the data
scohennm 12:10e6d0d12833 139 acc.setRegisterInStandby(REG_CTRL_5, SET_INT_LINE); // write the data
scohennm 12:10e6d0d12833 140 // End or seetup
scohennm 12:10e6d0d12833 141
scohennm 12:10e6d0d12833 142 acc.readRegs(REG_WHO_AM_I, &regData, 1);
scohennm 12:10e6d0d12833 143 sprintf (lcdData,"%x",regData);
scohennm 12:10e6d0d12833 144 LCDMess(lcdData,BLINKTIME);
scohennm 12:10e6d0d12833 145
scohennm 12:10e6d0d12833 146
scohennm 12:10e6d0d12833 147 while (true) {
scohennm 12:10e6d0d12833 148 acc.readRegs(REG_PULSE_SRC, &regData, 1);
scohennm 12:10e6d0d12833 149 sprintf (lcdData,"%x",regData);
scohennm 12:10e6d0d12833 150 LCDMess(lcdData,BLINKTIME);
scohennm 12:10e6d0d12833 151 LCDMessNoDwell(LCDMessages[relayState]);
scohennm 12:10e6d0d12833 152 wait(delay);
scohennm 12:10e6d0d12833 153 }
scohennm 12:10e6d0d12833 154 }