Diff: targets/hal/TARGET_NXP/TARGET_LPC15XX/pinmap.c

Revision:

144:ef7eb2e8f9f7

Parent:

0:9b334a45a8ff

--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/pinmap.c	Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/pinmap.c	Fri Sep 02 15:07:44 2016 +0100
@@ -1,41 +1,41 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-void pin_function(PinName pin, int function) {
-}
-
-void pin_mode(PinName pin, PinMode mode) {
-    MBED_ASSERT(pin != (PinName)NC);
-    
-    if ((pin == P0_22) || (pin == P0_23)) {
-        // The true open-drain pins PIO0_22 and PIO0_23 can be configured for different I2C-bus speeds.
-        return;
-    }
-    
-    __IO uint32_t *reg = (__IO uint32_t*)(LPC_IOCON_BASE + (pin * 4));
-      
-    if (mode == OpenDrain) {
-        *reg |= (1 << 10);
-    } else {
-        uint32_t tmp = *reg;
-        tmp &= ~(0x3 << 3);
-        tmp |= (mode & 0x3) << 3;
-        *reg = tmp;
-    }
-}
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed_assert.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+void pin_function(PinName pin, int function) {
+}
+
+void pin_mode(PinName pin, PinMode mode) {
+    MBED_ASSERT(pin != (PinName)NC);
+    
+    if ((pin == P0_22) || (pin == P0_23)) {
+        // The true open-drain pins PIO0_22 and PIO0_23 can be configured for different I2C-bus speeds.
+        return;
+    }
+    
+    __IO uint32_t *reg = (__IO uint32_t*)(LPC_IOCON_BASE + (pin * 4));
+      
+    if (mode == OpenDrain) {
+        *reg |= (1 << 10);
+    } else {
+        uint32_t tmp = *reg;
+        tmp &= ~(0x3 << 3);
+        tmp |= (mode & 0x3) << 3;
+        *reg = tmp;
+    }
+}