Steven Blair / rapid61850example

The goal of this software is to automatically generate C/C++ code which reads and writes GOOSE and Sampled Value packets. Any valid IEC 61850 Substation Configuration Description (SCD) file, describing GOOSE and/or SV communications, can be used as the input. The output code is lightweight and platform-independent, so it can run on a variety of devices, including low-cost microcontrollers. It\'s ideal for rapid-prototyping new protection and control systems that require communications. This mbed project is a simple example of this functionality. Other code: https://github.com/stevenblair/rapid61850 Project homepage: http://personal.strath.ac.uk/steven.m.blair/

Diff: main.cpp

Revision:
1:9399d44c2b1a
Parent:
0:230c10b228ea
--- a/main.cpp	Fri Oct 07 13:41:08 2011 +0000
+++ b/main.cpp	Fri Oct 07 13:48:18 2011 +0000
@@ -1,3 +1,23 @@
+/**
+ * Rapid-prototyping protection schemes with IEC 61850
+ *
+ * Copyright (c) 2011 Steven Blair
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
 #include "mbed.h"
 #include "iec61850.h"
 
@@ -20,7 +40,6 @@
 void setFault() {
     MAGNITUDE_NEG_SEQ = 50.0;
     MAGNITUDE_ZERO_SEQ = 25.0;
-    //offset = TWO_PI / 6;
 }
 
 void setNormal() {
@@ -67,11 +86,6 @@
     
     wait(1);
     
-    /*LPC_EMAC->MAXF = 0x0600;
-    LPC_EMAC->MAC2 |= (1 << 2);
-    LPC_EMAC->MAC2 &= 0xFFFD;
-    wait(1);*/
-    
     sv.attach_us(&svSnapshot, 1250);
 
     wait(5);
@@ -84,7 +98,7 @@
             eth.read((char *) bufIn, lenIn);
             gseDecode(bufIn, lenIn);
             
-            //printf("%f\n", D1Q1SB4.S1.C1.RSYN_1.gse_inputs.instMag_1.f);
+            //printf("%f\n", D1Q1SB4.S1.C1.RSYN_1.gse_inputs.instMag_1.f);  // monitor values from serial port
             
             if (D1Q1SB4.S1.C1.RSYN_1.gse_inputs.instMag_1.f > 0) {
                 setFault();