From Ben Katz mbed-dev library. Removed unnecessary target files to reduce the overall size by a factor of 10 to make it easier to import into the online IDE.
Dependents: motor_driver motor_driver_screaming_fix
hal/sleep_api.h
- Committer:
- saloutos
- Date:
- 2020-11-26
- Revision:
- 0:083111ae2a11
File content as of revision 0:083111ae2a11:
/** \addtogroup hal */ /** @{*/ /* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_SLEEP_API_H #define MBED_SLEEP_API_H #include "device.h" #if DEVICE_SLEEP #ifdef __cplusplus extern "C" { #endif /** Send the microcontroller to sleep * * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates * dynamic power used by the processor, memory systems and buses. The processor, peripheral and * memory state are maintained, and the peripherals continue to work and can generate interrupts. * * The processor can be woken up by any internal peripheral interrupt or external pin interrupt. * * @note * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be * able to access the LocalFileSystem */ void hal_sleep(void); /** Send the microcontroller to deep sleep * * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode * has the same sleep features as sleep plus it powers down peripherals and clocks. All state * is still maintained. * * The processor can only be woken up by an external interrupt on a pin or a watchdog timer. * * @note * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be * able to access the LocalFileSystem */ void hal_deepsleep(void); #ifdef __cplusplus } #endif #endif #endif /** @}*/