![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
not workin
Fork of BAE_FRDM_INTEGRATION by
HK.h
- Committer:
- greenroshks
- Date:
- 2014-12-15
- Revision:
- 8:667fbc82d634
- Parent:
- 7:f06840d848e3
File content as of revision 8:667fbc82d634:
//to be saved as HK.h #include "mbed.h" #define tstart -40 #define tstep 8 #define tstep_thermistor 8//verify!! #define tstart_thermistor -40 #define vstart 3.3 #define vstep 0.84667 #define cstart 0.0691 #define cstep 0.09133 #define rsens 0.095 struct SensorData { char Voltage[10]; char Current[10]; char Temperature[10]; char PanelTemperature[2];//read by the 4 thermistors on solar panels char Vcell;//unquantised char soc;//unquantised char alerts;//UNQUANTISED //(alerts[0]=1)-> reset indicator=>dont care //(alerts[1]=1)-> Vcell>ValrtMax(5.1V)->will always be on->dont care //(alerts[2]=1)-> Vcell<ValrtMin(5.1V)->indicates deep discharge //(alerts[3]=1)-> Vcell<Vreset(2.5V) //(alerts[5]=1)-> Soc CROSSES the threshold value //(alerts[6]=1)-> alert on (alerts[3]) enabled when Vcell<Vreset(here we set it to be 2.5V) char crate;//unquantised char faultpoll; //polled faults char faultir; //interupted faults char power_mode; //power modes //float magnetometer,gyro=>to be addes }; typedef struct ShortBeacon { char Voltage[1]; //battery voltage from gauge char AngularSpeed[2]; //all the 3 data char SubsystemStatus[1]; //power modes char Temp[3]; //temp of solar panel char ErrorFlag[1]; //fault }ShortBeacy; void FUNC_HK_MAIN(); int quantiz(float start,float step,float x); //--------------------------------following is header details for battery gauge------------------------------------------- #define MAX17048_H class MAX17048 { public: /** The default compensation value for the MAX17048 */ static const char RCOMP0= 0x97; /** Represents the different alert flags for the MAX17048 */ enum AlertFlags { ALERT_RI = (1 << 0), /**< Reset indicator */ ALERT_VH = (1 << 1), /**< Voltage high alert */ ALERT_VL = (1 << 2), /**< Voltage low alert */ ALERT_VR = (1 << 3), /**< Voltage reset alert */ ALERT_HD = (1 << 4), /**< SOC low alert */ ALERT_SC = (1 << 5) /**< SOC change alert */ }; //parametrised constructor MAX17048(PinName sda, PinName scl, int hz = 400000): m_I2C(sda, scl)//should it be same as the uC clock freq { //Set the I2C bus frequency m_I2C.frequency(hz); } // Probe for the MAX17048 and indicate if it's present on the bus bool open() { //Probe for the MAX17048 using a Zero Length Transfer if (!m_I2C.write(m_ADDR, NULL, 0)) { //Return success return true; } else { //Return failure return false; } } // Command the MAX17048 to perform a power-on reset void reset() { //Write the POR command write(REG_CMD, 0x5400); } // Command the MAX17048 to perform a QuickStart void quickStart() { //Read the current 16-bit register value unsigned short value = read(REG_MODE); //Set the QuickStart bit value |= (1 << 14); //Write the value back out write(REG_MODE, value); } //disable sleep void disable_sleep() { unsigned short value = read(REG_MODE); value &= ~(1 << 13); write(REG_MODE, value); } //disable the hibernate of the MAX17048 void disable_hibernate() { write(REG_HIBRT, 0x0000); } // Determine whether or not the SOC 1% change alert is enabled on the MAX17048 bool socChangeAlertEnabled() { //Read the 16-bit register value unsigned short value = read(REG_CONFIG); //Return the status of the ALSC bit if (value & (1 << 6)) return true; else return false; } // Enable or disable the SOC 1% change alert on the MAX17048 void socChangeAlertEnabled(bool enabled) { //Read the current 16-bit register value unsigned short value = read(REG_CONFIG); //Set or clear the ALSC bit if (enabled) value |= (1 << 6); else value &= ~(1 << 6); //Write the value back out write(REG_CONFIG, value); } // Determine whether or not the MAX17048 is asserting the ALRT pin bool alerting() { //Read the 16-bit register value unsigned short value = read(REG_CONFIG); //Return the status of the ALRT bit if (value & (1 << 5)) return true; else return false; } // Command the MAX17048 to de-assert the ALRT pin void clearAlert() { //Read the current 16-bit register value unsigned short value = read(REG_CONFIG); //Clear the ALRT bit value &= ~(1 << 5); //Write the value back out write(REG_CONFIG, value); } // return The current SOC empty alert threshold in %. char emptyAlertThreshold() { //Read the 16-bit register value unsigned short value = read(REG_CONFIG); //Extract the threshold return 32 - (value & 0x001F); } //Set the SOC empty alert threshold of the MAX17048 void emptyAlertThreshold(char threshold) { //Read the current 16-bit register value unsigned short value = read(REG_CONFIG); //Update the register value value &= 0xFFE0; value |= 32 - threshold; //Write the 16-bit register write(REG_CONFIG, value); } //return The current low voltage alert threshold in volts. float vAlertMinThreshold() { //Read the 16-bit register value unsigned short value = read(REG_VALRT); //Extract the alert threshold return (value >> 8) * 0.02;//least count is 20mV } // Set the low and high voltage alert threshold of the MAX17048 void vAlertMinMaxThreshold() { //Read the current 16-bit register value unsigned short value = read(REG_VALRT); //Mask off the old value value = 0xFFFF; //Write the 16-bit register write(REG_VALRT, value); } //return The current high voltage alert threshold in volts. float vAlertMaxThreshold() { //Read the 16-bit register value unsigned short value = read(REG_VALRT); //Extract the active threshold return (value & 0x00FF) * 0.02; } //return The current reset voltage threshold in volts. float vResetThreshold() { //Read the 16-bit register value unsigned short value = read(REG_VRESET_ID); //Extract the threshold return (value >> 9) * 0.04; } // Set the reset voltage threshold of the MAX17048 void vResetThresholdSet() { //Read the current 16-bit register value unsigned short value = read(REG_VRESET_ID); //Mask off the old //value value &= 0x00FF;//Dis=0 value |= 0x7C00;//corresponding to 2.5 V //Write the 16-bit register write(REG_VRESET_ID, value); } // Get the factory programmed 8-bit ID of the MAX17048 char id() { //Read the 16-bit register value unsigned short value = read(REG_VRESET_ID); //Return only the ID bits return value; } // Determine whether or not the voltage reset alert is enabled on the MAX17048 bool vResetAlertEnabled() { //Read the 16-bit register value unsigned short value = read(REG_STATUS); //Return the status of the EnVR bit if (value & (1 << 14)) return true; else return false; } // Enable or disable the voltage reset alert on the MAX17048 void vResetAlertEnabled(bool enabled) { //Read the current 16-bit register value unsigned short value = read(REG_STATUS); //Set or clear the EnVR bit if (enabled) value |= (1 << 14); else value &= ~(1 << 14); //Write the value back out write(REG_STATUS, value); } //Get the current alert flags on the MAX17048 //refer datasheet-status registers section to decode it. char alertFlags() { //Read the 16-bit register value unsigned short value = read(REG_STATUS); //Return only the flag bits return (value >> 8) & 0x3F; } // Clear all the alert flags on the MAX17048 void clearAlertFlags() { //Read the current 16-bit register value unsigned short value = read(REG_STATUS); //Clear the specified flag bits value &= ~( 0x3F<< 8); //Write the value back out write(REG_STATUS, value); } // Get the current cell voltage measurement of the MAX17048 float vcell() { //Read the 16-bit raw Vcell value unsigned short value = read(REG_VCELL); //Return Vcell in volts return value * 0.000078125; } // Get the current state of charge measurement of the MAX17048 as a float float soc() { //Read the 16-bit raw SOC value unsigned short value = read(REG_SOC); //Return SOC in percent return value * 0.00390625; } // Get the current state of charge measurement of the MAX17048 as an int int soc_int() { //Read the 16-bit raw SOC value unsigned short value = read(REG_SOC); //Return only the top byte return value >> 8; } // Get the current C rate measurement of the MAX17048 float crate() { //Read the 16-bit raw C/Rate value short value = read(REG_CRATE); //Return C/Rate in %/hr return value * 0.208; } //I2C register addresses enum Register { REG_VCELL = 0x02, REG_SOC = 0x04, REG_MODE = 0x06, REG_VERSION = 0x08, REG_HIBRT = 0x0A, REG_CONFIG = 0x0C, REG_VALRT = 0x14, REG_CRATE = 0x16, REG_VRESET_ID = 0x18, REG_STATUS = 0x1A, REG_TABLE = 0x40, REG_CMD = 0xFE }; //Member constants static const int m_ADDR=(0x36 << 1); //Member variables I2C m_I2C; //Internal functions unsigned short read(char reg) { //Create a temporary buffer char buff[2]; //Select the register m_I2C.write(m_ADDR, ®, 1, true); //Read the 16-bit register m_I2C.read(m_ADDR, buff, 2); //Return the combined 16-bit value return (buff[0] << 8) | buff[1]; } void write(char reg, unsigned short data) { //Create a temporary buffer char buff[3]; //Load the register address and 16-bit data buff[0] = reg; buff[1] = data >> 8; buff[2] = data; //Write the data m_I2C.write(m_ADDR, buff, 3); } }; void FUNC_BATTERYGAUGE_MAIN(float[]);