Santiago Gil / SX1276GenericLib-node1

LoRa node acquiring analog input and sending to LoRa Server - Working ok

Dependents:   DISCO-L072CZ-LRWAN1_LoRa_node EIoT_LoRa_node_1 EIoT_LoRa_node_2 EIoT_LoRa_node_3

Fork of SX1276GenericLib by Helmut Tschemernjak

Diff: sx1276/sx1276-hal.cpp

Revision:
7:2b555111463f
Parent:
6:e7f02929cd3d
Child:
8:0fe3e0e8007b
diff -r e7f02929cd3d -r 2b555111463f sx1276/sx1276-hal.cpp
--- a/sx1276/sx1276-hal.cpp	Thu Sep 04 14:03:20 2014 +0000
+++ b/sx1276/sx1276-hal.cpp	Fri Sep 19 14:16:35 2014 +0000
@@ -33,12 +33,12 @@
     { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },  
 };
 
-SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), 
-                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ),
+SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
+                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( ),
                             PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
                             PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
                             PinName antSwitch )
-                            : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5),
+                            : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5),
                             antSwitch( antSwitch ),
                         #if( defined ( TARGET_KL25Z ) ||  defined ( TARGET_LPC11U6X ) )
                             fake( A3 )
@@ -65,14 +65,14 @@
     this->settings.State = IDLE ;
 }
 
-SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), 
-                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ) ) 
+SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
+                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( ) ) 
                         #if( defined ( TARGET_KL25Z ) ||  defined ( TARGET_LPC11U6X ) )
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
                             antSwitch( A4 ), 
                             fake( A3 )
                         #elif defined ( TARGET_NUCLEO_L152RE )
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
+                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
                             antSwitch( A4 ),
                             fake( D8 )
                         #else