Get value from Sparkfun IMU module, 6-degrees-of-freedom (ITG-3200/ADXL345) Gyro sensor and Accel sensor is included.

Dependencies:   ITG3200 mbed

Files at this revision

API Documentation at this revision

Comitter:
ryought
Date:
Mon Nov 26 05:34:56 2012 +0000
Commit message:
First Commit It runs.

Changed in this revision

ADXL345_I2C.cpp Show annotated file Show diff for this revision Revisions of this file
ADXL345_I2C.h Show annotated file Show diff for this revision Revisions of this file
ITG3200.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file
diff -r 000000000000 -r cda6d9f5a43c ADXL345_I2C.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADXL345_I2C.cpp	Mon Nov 26 05:34:56 2012 +0000
@@ -0,0 +1,423 @@
+/**
+ * @author Peter Swanson
+ * A personal note from me: Jesus Christ has changed my life so much it blows my mind. I say this because
+ *                  today, religion is thought of as something that you do or believe and has about as
+ *                  little impact on a person as their political stance. But for me, God gives me daily
+ *                  strength and has filled my life with the satisfaction that I could never find in any
+ *                  of the other things that I once looked for it in. 
+ * If your interested, heres verse that changed my life:
+ *      Rom 8:1-3: "Therefore, there is now no condemnation for those who are in Christ Jesus,
+ *                  because through Christ Jesus, the law of the Spirit who gives life has set
+ *                  me free from the law of sin (which brings...) and death. For what the law 
+ *                  was powerless to do in that it was weakened by the flesh, God did by sending
+ *                  His own Son in the likeness of sinful flesh to be a sin offering. And so He
+ *                  condemned sin in the flesh in order that the righteous requirements of the 
+ *                  (God's) law might be fully met in us, who live not according to the flesh
+ *                  but according to the Spirit."
+ *
+ *  A special thanks to Ewout van Bekkum for all his patient help in developing this library!
+ *
+ * @section LICENSE
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * @section DESCRIPTION
+ *
+ * ADXL345, triple axis, I2C interface, accelerometer.
+ *
+ * Datasheet:
+ *
+ * http://www.analog.com/static/imported-files/data_sheets/ADXL345.pdf
+ */  
+ 
+/**
+ * Includes
+ */
+#include "ADXL345_I2C.h"
+
+//#include "mbed.h"
+
+ADXL345_I2C::ADXL345_I2C(PinName sda, PinName scl) : i2c_(sda, scl) {
+
+    //400kHz, allowing us to use the fastest data rates.
+    i2c_.frequency(400000);   
+// initialize the BW data rate
+    char tx[2];
+    tx[0] = ADXL345_BW_RATE_REG;
+    tx[1] = ADXL345_1600HZ; //value greater than or equal to 0x0A is written into the rate bits (Bit D3 through Bit D0) in the BW_RATE register 
+ i2c_.write( ADXL345_I2C_WRITE , tx, 2);  
+
+//Data format (for +-16g) - This is done by setting Bit D3 of the DATA_FORMAT register (Address 0x31) and writing a value of 0x03 to the range bits (Bit D1 and Bit D0) of the DATA_FORMAT register (Address 0x31).
+   
+ char rx[2];
+    rx[0] = ADXL345_DATA_FORMAT_REG;
+    rx[1] = 0x0B; 
+     // full res and +_16g
+ i2c_.write( ADXL345_I2C_WRITE , rx, 2); 
+ 
+ // Set Offset  - programmed into the OFSX, OFSY, and OFXZ registers, respectively, as 0xFD, 0x03 and 0xFE.
+  char x[2];
+    x[0] = ADXL345_OFSX_REG ;
+    x[1] = 0xFD; 
+ i2c_.write( ADXL345_I2C_WRITE , x, 2);
+  char y[2];
+    y[0] = ADXL345_OFSY_REG ;
+    y[1] = 0x03; 
+ i2c_.write( ADXL345_I2C_WRITE , y, 2);
+ char z[2];
+    z[0] = ADXL345_OFSZ_REG ;
+    z[1] = 0xFE; 
+ i2c_.write( ADXL345_I2C_WRITE , z, 2);
+}
+
+
+char ADXL345_I2C::SingleByteRead(char address){   
+   char tx = address;
+   char output; 
+    i2c_.write( ADXL345_I2C_WRITE , &tx, 1);  //tell it what you want to read
+    i2c_.read( ADXL345_I2C_READ , &output, 1);    //tell it where to store the data
+    return output;
+  
+}
+
+
+/*
+***info on the i2c_.write***
+address     8-bit I2C slave address [ addr | 0 ]
+data        Pointer to the byte-array data to send
+length        Number of bytes to send
+repeated    Repeated start, true - do not send stop at end
+returns     0 on success (ack), or non-0 on failure (nack)
+*/
+
+int ADXL345_I2C::SingleByteWrite(char address, char data){ 
+   int ack = 0;
+   char tx[2];
+   tx[0] = address;
+   tx[1] = data;
+   return   ack | i2c_.write( ADXL345_I2C_WRITE , tx, 2);   
+}
+
+
+
+void ADXL345_I2C::multiByteRead(char address, char* output, int size) {
+    i2c_.write( ADXL345_I2C_WRITE, &address, 1);  //tell it where to read from
+    i2c_.read( ADXL345_I2C_READ , output, size);      //tell it where to store the data read
+}
+
+
+int ADXL345_I2C::multiByteWrite(char address, char* ptr_data, int size) {
+        int ack;
+   
+               ack = i2c_.write( ADXL345_I2C_WRITE, &address, 1);  //tell it where to write to
+        return ack | i2c_.write( ADXL345_I2C_READ, ptr_data, size);  //tell it what data to write
+                                    
+}
+
+
+void ADXL345_I2C::getOutput(int* readings){
+    char buffer[6];    
+    multiByteRead(ADXL345_DATAX0_REG, buffer, 6);
+    
+    readings[0] = (int)buffer[1] << 8 | (int)buffer[0];
+    readings[1] = (int)buffer[3] << 8 | (int)buffer[2];
+    readings[2] = (int)buffer[5] << 8 | (int)buffer[4];
+
+}
+
+
+
+char ADXL345_I2C::getDeviceID() {  
+    return SingleByteRead(ADXL345_DEVID_REG);
+    }
+//
+int ADXL345_I2C::setPowerMode(char mode) { 
+
+    //Get the current register contents, so we don't clobber the rate value.
+    char registerContents = (mode << 4) | SingleByteRead(ADXL345_BW_RATE_REG);
+
+   return SingleByteWrite(ADXL345_BW_RATE_REG, registerContents);
+
+}
+
+char ADXL345_I2C::getPowerControl() {    
+    return SingleByteRead(ADXL345_POWER_CTL_REG);
+}
+
+int ADXL345_I2C::setPowerControl(char settings) {    
+    return SingleByteWrite(ADXL345_POWER_CTL_REG, settings);
+
+}
+
+
+
+char ADXL345_I2C::getDataFormatControl(void){
+
+    return SingleByteRead(ADXL345_DATA_FORMAT_REG);
+}
+
+int ADXL345_I2C::setDataFormatControl(char settings){
+
+   return SingleByteWrite(ADXL345_DATA_FORMAT_REG, settings);
+    
+}
+
+int ADXL345_I2C::setDataRate(char rate) {
+
+    //Get the current register contents, so we don't clobber the power bit.
+    char registerContents = SingleByteRead(ADXL345_BW_RATE_REG);
+
+    registerContents &= 0x10;
+    registerContents |= rate;
+
+    return SingleByteWrite(ADXL345_BW_RATE_REG, registerContents);
+
+}
+
+
+char ADXL345_I2C::getOffset(char axis) {     
+
+    char address = 0;
+
+    if (axis == ADXL345_X) {
+        address = ADXL345_OFSX_REG;
+    } else if (axis == ADXL345_Y) {
+        address = ADXL345_OFSY_REG;
+    } else if (axis == ADXL345_Z) {
+        address = ADXL345_OFSZ_REG;
+    }
+
+   return SingleByteRead(address);
+}
+
+int ADXL345_I2C::setOffset(char axis, char offset) {        
+
+    char address = 0;
+
+    if (axis == ADXL345_X) {
+        address = ADXL345_OFSX_REG;
+    } else if (axis == ADXL345_Y) {
+        address = ADXL345_OFSY_REG;
+    } else if (axis == ADXL345_Z) {
+        address = ADXL345_OFSZ_REG;
+    }
+
+   return SingleByteWrite(address, offset);
+
+}
+
+
+char ADXL345_I2C::getFifoControl(void){
+
+    return SingleByteRead(ADXL345_FIFO_CTL);
+
+}
+
+int ADXL345_I2C::setFifoControl(char settings){
+   return SingleByteWrite(ADXL345_FIFO_STATUS, settings);
+
+}
+
+char ADXL345_I2C::getFifoStatus(void){
+
+    return SingleByteRead(ADXL345_FIFO_STATUS);
+
+}
+
+
+
+char ADXL345_I2C::getTapThreshold(void) {
+
+    return SingleByteRead(ADXL345_THRESH_TAP_REG);
+}
+
+int ADXL345_I2C::setTapThreshold(char threshold) {   
+
+   return SingleByteWrite(ADXL345_THRESH_TAP_REG, threshold);
+
+}
+
+
+float ADXL345_I2C::getTapDuration(void) {     
+
+    return (float)SingleByteRead(ADXL345_DUR_REG)*625;
+}
+
+int ADXL345_I2C::setTapDuration(short int duration_us) {
+
+    short int tapDuration = duration_us / 625;
+    char tapChar[2];
+     tapChar[0] = (tapDuration & 0x00FF);
+     tapChar[1] = (tapDuration >> 8) & 0x00FF;
+    return multiByteWrite(ADXL345_DUR_REG, tapChar, 2);
+
+}
+
+float ADXL345_I2C::getTapLatency(void) {
+
+    return (float)SingleByteRead(ADXL345_LATENT_REG)*1.25;
+}
+
+int ADXL345_I2C::setTapLatency(short int latency_ms) {
+
+    latency_ms = latency_ms / 1.25;
+    char latChar[2];
+     latChar[0] = (latency_ms & 0x00FF);
+     latChar[1] = (latency_ms << 8) & 0xFF00;
+    return multiByteWrite(ADXL345_LATENT_REG, latChar, 2);
+
+}
+
+float ADXL345_I2C::getWindowTime(void) {
+
+    return (float)SingleByteRead(ADXL345_WINDOW_REG)*1.25;
+}
+
+int ADXL345_I2C::setWindowTime(short int window_ms) {
+
+    window_ms = window_ms / 1.25;
+    char windowChar[2];
+    windowChar[0] = (window_ms & 0x00FF);
+    windowChar[1] = ((window_ms << 8) & 0xFF00);
+   return multiByteWrite(ADXL345_WINDOW_REG, windowChar, 2);
+
+}
+
+char ADXL345_I2C::getActivityThreshold(void) {
+
+    return SingleByteRead(ADXL345_THRESH_ACT_REG);
+}
+
+int ADXL345_I2C::setActivityThreshold(char threshold) {
+    return SingleByteWrite(ADXL345_THRESH_ACT_REG, threshold);
+
+}
+
+char ADXL345_I2C::getInactivityThreshold(void) {
+    return SingleByteRead(ADXL345_THRESH_INACT_REG);
+       
+}
+
+//int FUNCTION(short int * ptr_Output)
+//short int FUNCTION ()
+
+int ADXL345_I2C::setInactivityThreshold(char threshold) {
+    return SingleByteWrite(ADXL345_THRESH_INACT_REG, threshold);
+
+}
+
+char ADXL345_I2C::getTimeInactivity(void) {
+
+    return SingleByteRead(ADXL345_TIME_INACT_REG);
+
+}
+
+int ADXL345_I2C::setTimeInactivity(char timeInactivity) {
+    return SingleByteWrite(ADXL345_TIME_INACT_REG, timeInactivity);
+
+}
+
+char ADXL345_I2C::getActivityInactivityControl(void) {
+
+    return SingleByteRead(ADXL345_ACT_INACT_CTL_REG);
+
+}
+
+int ADXL345_I2C::setActivityInactivityControl(char settings) {
+    return SingleByteWrite(ADXL345_ACT_INACT_CTL_REG, settings);
+    
+}
+
+char ADXL345_I2C::getFreefallThreshold(void) {
+
+    return SingleByteRead(ADXL345_THRESH_FF_REG);
+
+}
+
+int ADXL345_I2C::setFreefallThreshold(char threshold) {
+   return SingleByteWrite(ADXL345_THRESH_FF_REG, threshold);
+
+}
+
+char ADXL345_I2C::getFreefallTime(void) {
+
+    return SingleByteRead(ADXL345_TIME_FF_REG)*5;
+
+}
+
+int ADXL345_I2C::setFreefallTime(short int freefallTime_ms) {
+     freefallTime_ms = freefallTime_ms / 5;
+     char fallChar[2];
+     fallChar[0] = (freefallTime_ms & 0x00FF);
+     fallChar[1] = (freefallTime_ms << 8) & 0xFF00;
+    
+    return multiByteWrite(ADXL345_TIME_FF_REG, fallChar, 2);
+
+}
+
+char ADXL345_I2C::getTapAxisControl(void) {
+
+    return SingleByteRead(ADXL345_TAP_AXES_REG);
+
+}
+
+int ADXL345_I2C::setTapAxisControl(char settings) {
+   return SingleByteWrite(ADXL345_TAP_AXES_REG, settings);
+
+}
+
+char ADXL345_I2C::getTapSource(void) {
+
+    return SingleByteRead(ADXL345_ACT_TAP_STATUS_REG);
+
+}
+
+
+
+char ADXL345_I2C::getInterruptEnableControl(void) {
+
+    return SingleByteRead(ADXL345_INT_ENABLE_REG);
+
+}
+
+int ADXL345_I2C::setInterruptEnableControl(char settings) {
+   return SingleByteWrite(ADXL345_INT_ENABLE_REG, settings);
+
+}
+
+char ADXL345_I2C::getInterruptMappingControl(void) {
+
+    return SingleByteRead(ADXL345_INT_MAP_REG);
+
+}
+
+int ADXL345_I2C::setInterruptMappingControl(char settings) {
+    return SingleByteWrite(ADXL345_INT_MAP_REG, settings);
+
+}
+
+char ADXL345_I2C::getInterruptSource(void){
+
+    return SingleByteRead(ADXL345_INT_SOURCE_REG);
+
+}
+
+
+
+
diff -r 000000000000 -r cda6d9f5a43c ADXL345_I2C.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADXL345_I2C.h	Mon Nov 26 05:34:56 2012 +0000
@@ -0,0 +1,577 @@
+/**
+ * @author Peter Swanson
+ * A personal note from me: Jesus Christ has changed my life so much it blows my mind. I say this because
+ *                  today, religion is thought of as something that you do or believe and has about as
+ *                  little impact on a person as their political stance. But for me, God gives me daily
+ *                  strength and has filled my life with the satisfaction that I could never find in any
+ *                  of the other things that I once looked for it in. 
+ * If your interested, heres verse that changed my life:
+ *      Rom 8:1-3: "Therefore, there is now no condemnation for those who are in Christ Jesus,
+ *                  because through Christ Jesus, the law of the Spirit who gives life has set
+ *                  me free from the law of sin (which brings...) and death. For what the law 
+ *                  was powerless to do in that it was weakened by the flesh, God did by sending
+ *                  His own Son in the likeness of sinful flesh to be a sin offering. And so He
+ *                  condemned sin in the flesh in order that the righteous requirements of the 
+ *                  (God's) law might be fully met in us, who live not according to the flesh
+ *                  but according to the Spirit."
+ *
+ *  A special thanks to Ewout van Bekkum for all his patient help in developing this library!
+ *
+ * @section LICENSE
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * @section DESCRIPTION
+ *
+ * ADXL345, triple axis, I2C interface, accelerometer.
+ *
+ * Datasheet:
+ *
+ * http://www.analog.com/static/imported-files/data_sheets/ADXL345.pdf
+ */  
+
+
+
+#ifndef ADXL345_I2C_H
+#define ADXL345_I2C_H
+
+/**
+ * Includes
+ */
+#include "mbed.h"
+
+/**
+ * Defines
+ */
+//Registers.
+#define ADXL345_DEVID_REG          0x00
+#define ADXL345_THRESH_TAP_REG     0x1D
+#define ADXL345_OFSX_REG           0x1E
+#define ADXL345_OFSY_REG           0x1F
+#define ADXL345_OFSZ_REG           0x20
+#define ADXL345_DUR_REG            0x21
+#define ADXL345_LATENT_REG         0x22
+#define ADXL345_WINDOW_REG         0x23
+#define ADXL345_THRESH_ACT_REG     0x24
+#define ADXL345_THRESH_INACT_REG   0x25
+#define ADXL345_TIME_INACT_REG     0x26
+#define ADXL345_ACT_INACT_CTL_REG  0x27
+#define ADXL345_THRESH_FF_REG      0x28
+#define ADXL345_TIME_FF_REG        0x29
+#define ADXL345_TAP_AXES_REG       0x2A
+#define ADXL345_ACT_TAP_STATUS_REG 0x2B
+#define ADXL345_BW_RATE_REG        0x2C
+#define ADXL345_POWER_CTL_REG      0x2D
+#define ADXL345_INT_ENABLE_REG     0x2E
+#define ADXL345_INT_MAP_REG        0x2F
+#define ADXL345_INT_SOURCE_REG     0x30
+#define ADXL345_DATA_FORMAT_REG    0x31
+#define ADXL345_DATAX0_REG         0x32
+#define ADXL345_DATAX1_REG         0x33
+#define ADXL345_DATAY0_REG         0x34
+#define ADXL345_DATAY1_REG         0x35
+#define ADXL345_DATAZ0_REG         0x36
+#define ADXL345_DATAZ1_REG         0x37
+#define ADXL345_FIFO_CTL           0x38
+#define ADXL345_FIFO_STATUS        0x39
+
+//Data rate codes.
+#define ADXL345_3200HZ      0x0F
+#define ADXL345_1600HZ      0x0E
+#define ADXL345_800HZ       0x0D
+#define ADXL345_400HZ       0x0C
+#define ADXL345_200HZ       0x0B
+#define ADXL345_100HZ       0x0A
+#define ADXL345_50HZ        0x09
+#define ADXL345_25HZ        0x08
+#define ADXL345_12HZ5       0x07
+#define ADXL345_6HZ25       0x06
+
+// read or write bytes
+#define ADXL345_I2C_READ    0xA7  
+#define ADXL345_I2C_WRITE   0xA6 
+#define ADXL345_I2C_ADDRESS 0x53   //the ADXL345 7-bit address is 0x53 when ALT ADDRESS is low as it is on the sparkfun chip: when ALT ADDRESS is high the address is 0x1D
+
+/////////////when ALT ADDRESS pin is high:
+//#define ADXL345_I2C_READ    0x3B   
+//#define ADXL345_I2C_WRITE   0x3A
+//#define ADXL345_I2C_ADDRESS 0x1D 
+
+#define ADXL345_X           0x00
+#define ADXL345_Y           0x01
+#define ADXL345_Z           0x02
+
+
+
+// modes
+#define MeasurementMode     0x08
+
+
+
+
+
+
+
+class ADXL345_I2C {
+
+public:
+
+    /**
+     * Constructor.
+     *
+     * @param mosi mbed pin to use for SDA line of I2C interface.
+     * @param sck mbed pin to use for SCL line of I2C interface.
+     */
+    ADXL345_I2C(PinName sda, PinName scl);
+
+    /**
+     * Get the output of all three axes.
+     *
+     * @param Pointer to a buffer to hold the accelerometer value for the
+     *        x-axis, y-axis and z-axis [in that order].
+     */
+    void getOutput(int* readings);
+
+    /**
+     * Read the device ID register on the device.
+     *
+     * @return The device ID code [0xE5]
+     */
+    char getDeviceID(void);
+
+
+    
+     /**
+     * Set the power mode.
+     *
+     * @param mode 0 -> Normal operation.
+     *             1 -> Reduced power operation.
+     */     
+int setPowerMode(char mode);
+  
+     /**
+     * Set the power control settings.
+     *
+     * See datasheet for details.
+     *
+     * @param The control byte to write to the POWER_CTL register.
+     */
+ int setPowerControl(char settings);     
+      /**
+     * Get the power control settings.
+     *
+     * See datasheet for details.
+     *
+     * @return The contents of the POWER_CTL register.
+     */
+    char getPowerControl(void);
+
+       
+    /**
+     * Get the data format settings.
+     *
+     * @return The contents of the DATA_FORMAT register.
+     */
+     
+    char getDataFormatControl(void);
+    
+    /**
+     * Set the data format settings.
+     *
+     * @param settings The control byte to write to the DATA_FORMAT register.
+     */
+    int setDataFormatControl(char settings);
+  
+       /**
+     * Set the data rate.
+     *
+     * @param rate The rate code (see #defines or datasheet).
+     */
+    int setDataRate(char rate);
+    
+
+       /**
+     * Get the current offset for a particular axis.
+     *
+     * @param axis 0x00 -> X-axis
+     *             0x01 -> Y-axis
+     *             0x02 -> Z-axis
+     * @return The current offset as an 8-bit 2's complement number with scale
+     *         factor 15.6mg/LSB.
+     */
+     
+       char getOffset(char axis);
+
+    /**
+     * Set the offset for a particular axis.
+     *
+     * @param axis 0x00 -> X-axis
+     *             0x01 -> Y-axis
+     *             0x02 -> Z-axis
+     * @param offset The offset as an 8-bit 2's complement number with scale
+     *               factor 15.6mg/LSB.
+     */
+    int setOffset(char axis, char offset);
+
+
+    
+    /**
+     * Get the FIFO control settings.
+     *
+     * @return The contents of the FIFO_CTL register.
+     */
+    char getFifoControl(void);
+    
+    /**
+     * Set the FIFO control settings.
+     *
+     * @param The control byte to write to the FIFO_CTL register.
+     */
+    int setFifoControl(char settings);
+    
+    /**
+     * Get FIFO status.
+     *
+     * @return The contents of the FIFO_STATUS register.
+     */
+    char getFifoStatus(void);
+    
+    /**
+     * Read the tap threshold on the device.
+     *
+     * @return The tap threshold as an 8-bit number with a scale factor of
+     *         62.5mg/LSB.
+     */
+    char getTapThreshold(void);
+
+    /**
+     * Set the tap threshold.
+     *
+     * @param The tap threshold as an 8-bit number with a scale factor of
+     *        62.5mg/LSB.
+     */
+    int setTapThreshold(char threshold);
+
+    /**
+     * Get the tap duration required to trigger an event.
+     *
+     * @return The max time that an event must be above the tap threshold to
+     *         qualify as a tap event, in microseconds.
+     */
+    float getTapDuration(void);
+
+    /**
+     * Set the tap duration required to trigger an event.
+     *
+     * @param duration_us The max time that an event must be above the tap
+     *                    threshold to qualify as a tap event, in microseconds.
+     *                    Time will be normalized by the scale factor which is
+     *                    625us/LSB. A value of 0 disables the single/double
+     *                    tap functions.
+     */
+    int setTapDuration(short int duration_us);
+
+    /**
+     * Get the tap latency between the detection of a tap and the time window.
+     *
+     * @return The wait time from the detection of a tap event to the start of
+     *         the time window during which a possible second tap event can be
+     *         detected in milliseconds.
+     */
+    float getTapLatency(void);
+
+    /**
+     * Set the tap latency between the detection of a tap and the time window.
+     *
+     * @param latency_ms The wait time from the detection of a tap event to the
+     *                   start of the time window during which a possible
+     *                   second tap event can be detected in milliseconds.
+     *                   A value of 0 disables the double tap function.
+     */
+    int setTapLatency(short int latency_ms);
+
+    /**
+     * Get the time of window between tap latency and a double tap.
+     *
+     * @return The amount of time after the expiration of the latency time
+     *         during which a second valid tap can begin, in milliseconds.
+     */
+    float getWindowTime(void);
+
+    /**
+     * Set the time of the window between tap latency and a double tap.
+     *
+     * @param window_ms The amount of time after the expiration of the latency
+     *                  time during which a second valid tap can begin,
+     *                  in milliseconds.
+     */
+    int setWindowTime(short int window_ms);
+
+    /**
+     * Get the threshold value for detecting activity.
+     *
+     * @return The threshold value for detecting activity as an 8-bit number.
+     *         Scale factor is 62.5mg/LSB.
+     */
+     char getActivityThreshold(void);
+
+    /**
+     * Set the threshold value for detecting activity.
+     *
+     * @param threshold The threshold value for detecting activity as an 8-bit
+     *                  number. Scale factor is 62.5mg/LSB. A value of 0 may
+     *                  result in undesirable behavior if the activity
+     *                  interrupt is enabled.
+     */
+    int setActivityThreshold(char threshold);
+
+    /**
+     * Get the threshold value for detecting inactivity.
+     *
+     * @return The threshold value for detecting inactivity as an 8-bit number.
+     *         Scale factor is 62.5mg/LSB.
+     */
+     char getInactivityThreshold(void);
+
+    /**
+     * Set the threshold value for detecting inactivity.
+     *
+     * @param threshold The threshold value for detecting inactivity as an
+     *                  8-bit number. Scale factor is 62.5mg/LSB.
+     */
+    int setInactivityThreshold(char threshold);
+
+    /**
+     * Get the time required for inactivity to be declared.
+     *
+     * @return The amount of time that acceleration must be less than the
+     *         inactivity threshold for inactivity to be declared, in
+     *         seconds.
+     */
+     char getTimeInactivity(void);
+    
+    /**
+     * Set the time required for inactivity to be declared.
+     *
+     * @param inactivity The amount of time that acceleration must be less than
+     *                   the inactivity threshold for inactivity to be
+     *                   declared, in seconds. A value of 0 results in an
+     *                   interrupt when the output data is less than the
+     *                   threshold inactivity.
+     */
+    int setTimeInactivity(char timeInactivity);
+    
+    /**
+     * Get the activity/inactivity control settings.
+     *
+     *      D7            D6             D5            D4
+     * +-----------+--------------+--------------+--------------+
+     * | ACT ac/dc | ACT_X enable | ACT_Y enable | ACT_Z enable |
+     * +-----------+--------------+--------------+--------------+
+     *
+     *        D3             D2               D1              D0
+     * +-------------+----------------+----------------+----------------+
+     * | INACT ac/dc | INACT_X enable | INACT_Y enable | INACT_Z enable |
+     * +-------------+----------------+----------------+----------------+
+     *
+     * See datasheet for details.
+     *
+     * @return The contents of the ACT_INACT_CTL register.
+     */
+     char getActivityInactivityControl(void);
+    
+    /**
+     * Set the activity/inactivity control settings.
+     *
+     *      D7            D6             D5            D4
+     * +-----------+--------------+--------------+--------------+
+     * | ACT ac/dc | ACT_X enable | ACT_Y enable | ACT_Z enable |
+     * +-----------+--------------+--------------+--------------+
+     *
+     *        D3             D2               D1              D0
+     * +-------------+----------------+----------------+----------------+
+     * | INACT ac/dc | INACT_X enable | INACT_Y enable | INACT_Z enable |
+     * +-------------+----------------+----------------+----------------+
+     *
+     * See datasheet for details.
+     *
+     * @param settings The control byte to write to the ACT_INACT_CTL register.
+     */
+    int setActivityInactivityControl(char settings);
+    
+    /**
+     * Get the threshold for free fall detection.
+     *
+     * @return The threshold value for free-fall detection, as an 8-bit number,
+     *         with scale factor 62.5mg/LSB.
+     */
+     char getFreefallThreshold(void);
+    
+    /**
+     * Set the threshold for free fall detection.
+     *
+     * @return The threshold value for free-fall detection, as an 8-bit number,
+     *         with scale factor 62.5mg/LSB. A value of 0 may result in 
+     *         undesirable behavior if the free-fall interrupt is enabled.
+     *         Values between 300 mg and 600 mg (0x05 to 0x09) are recommended.
+     */
+    int setFreefallThreshold(char threshold);
+    
+    /**
+     * Get the time required to generate a free fall interrupt.
+     *
+     * @return The minimum time that the value of all axes must be less than
+     *         the freefall threshold to generate a free-fall interrupt, in
+     *         milliseconds.
+     */
+     char getFreefallTime(void);
+    
+    /**
+     * Set the time required to generate a free fall interrupt.
+     *
+     * @return The minimum time that the value of all axes must be less than
+     *         the freefall threshold to generate a free-fall interrupt, in
+     *         milliseconds. A value of 0 may result in undesirable behavior
+     *         if the free-fall interrupt is enabled. Values between 100 ms 
+     *         and 350 ms (0x14 to 0x46) are recommended.
+     */
+    int setFreefallTime(short int freefallTime_ms);
+    
+    /**
+     * Get the axis tap settings.
+     *
+     *      D3           D2            D1             D0
+     * +----------+--------------+--------------+--------------+
+     * | Suppress | TAP_X enable | TAP_Y enable | TAP_Z enable |
+     * +----------+--------------+--------------+--------------+
+     *
+     * (D7-D4 are 0s).
+     *
+     * See datasheet for more details.
+     *
+     * @return The contents of the TAP_AXES register.
+     */ 
+     char getTapAxisControl(void);
+    
+    /**
+     * Set the axis tap settings.
+     *
+     *      D3           D2            D1             D0
+     * +----------+--------------+--------------+--------------+
+     * | Suppress | TAP_X enable | TAP_Y enable | TAP_Z enable |
+     * +----------+--------------+--------------+--------------+
+     *
+     * (D7-D4 are 0s).
+     *
+     * See datasheet for more details.
+     *
+     * @param The control byte to write to the TAP_AXES register.
+     */
+    int setTapAxisControl(char settings);
+    
+    /**
+     * Get the source of a tap.
+     *
+     * @return The contents of the ACT_TAP_STATUS register.
+     */
+     char getTapSource(void);
+    
+     /**
+     * Get the interrupt enable settings.
+     *
+     * @return The contents of the INT_ENABLE register.
+     */
+
+     char getInterruptEnableControl(void);
+    
+    /**
+     * Set the interrupt enable settings.
+     *
+     * @param settings The control byte to write to the INT_ENABLE register.
+     */
+    int setInterruptEnableControl(char settings);
+    
+    /**
+     * Get the interrupt mapping settings.
+     *
+     * @return The contents of the INT_MAP register.
+     */
+     char getInterruptMappingControl(void);
+    
+    /**
+     * Set the interrupt mapping settings.
+     *
+     * @param settings The control byte to write to the INT_MAP register.
+     */
+    int setInterruptMappingControl(char settings);
+    
+    /**
+     * Get the interrupt source.
+     *
+     * @return The contents of the INT_SOURCE register.
+     */
+     char getInterruptSource(void);
+    
+   
+private:
+
+    I2C i2c_;
+    
+
+    /**
+     * Read one byte from a register on the device.
+     *
+     * @param: - the address to be read from
+     *
+     * @return: the value of the data read
+     */
+    char SingleByteRead(char address);
+
+    /**
+     * Write one byte to a register on the device.
+     *
+     * @param:
+        - address of the register to write to.
+        - the value of the data to store
+     */
+  
+   
+   int SingleByteWrite(char address, char data);
+
+    /**
+     * Read several consecutive bytes on the device and store them in a given location.
+     *
+     * @param startAddress: The address of the first register to read from.
+     * @param ptr_output: a pointer to the location to store the data being read
+     * @param size: The number of bytes to read.
+     */
+    void multiByteRead(char startAddress, char* ptr_output, int size);
+
+    /**
+     * Write several consecutive bytes  on the device.
+     *
+     * @param startAddress: The address of the first register to write to.
+     * @param ptr_data: Pointer to a location which contains the data to write.
+     * @param size: The number of bytes to write.
+     */
+    int multiByteWrite(char startAddress, char* ptr_data, int size);
+
+};
+
+#endif /* ADXL345_I2C_H */
diff -r 000000000000 -r cda6d9f5a43c ITG3200.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ITG3200.lib	Mon Nov 26 05:34:56 2012 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/aberk/code/ITG3200/#b098d99dd81e
diff -r 000000000000 -r cda6d9f5a43c main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Nov 26 05:34:56 2012 +0000
@@ -0,0 +1,55 @@
+#include "ITG3200.h"
+#include "ADXL345_I2C.h"
+
+Serial pc(USBTX, USBRX);
+ITG3200 gyro(p9, p10);
+ADXL345_I2C accel(p9, p10);
+
+int main() {
+    gyro.setWhoAmI(0x68);
+    pc.printf("Now starting 6-degrees-of-freedom (ITG-3200 ADXL345) test...\n");
+    pc.printf("Accelerometer Device ID is: 0x%02x\n", accel.getDeviceID());
+    pc.printf("Gyro Devide ID is: 0x02x\n", gyro.getWhoAmI());
+    
+    int accel_read[3] = {0, 0, 0};
+    
+    // Accel setup
+    // These are here to test whether any of the initialization fails. It will print the failure
+    if (accel.setPowerControl(0x00)){
+         pc.printf("didn't intitialize power control\n"); 
+         return 0;  }
+    //Full resolution, +/-16g, 4mg/LSB.
+    wait(.001);
+     
+    if(accel.setDataFormatControl(0x0B)){
+        pc.printf("didn't set data format\n");
+        return 0;  }
+    wait(.001);
+    
+    //3.2kHz data rate.
+    if(accel.setDataRate(ADXL345_3200HZ)){
+       pc.printf("didn't set data rate\n");
+       return 0;    }
+    wait(.001);
+    
+    //Measurement mode.
+    
+    if(accel.setPowerControl(MeasurementMode)) {
+       pc.printf("didn't set the power control to measurement\n"); 
+       return 0;   
+    }
+     
+    // Gyro setup   
+    gyro.setLpBandwidth(LPFBW_42HZ);
+
+    while (1) {
+        wait(0.1);
+        
+        accel.getOutput(accel_read);
+        
+        pc.printf("Gyro[%5i, %5i, %5i]   Accel[%4i, %4i, %4i]\n", 
+                            gyro.getGyroX(), gyro.getGyroY(), gyro.getGyroZ(),
+                            (int16_t)accel_read[0], (int16_t)accel_read[1], (int16_t)accel_read[2]);
+    }
+    
+}
diff -r 000000000000 -r cda6d9f5a43c mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Mon Nov 26 05:34:56 2012 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/3d775a932e1d
\ No newline at end of file