Руслан Бредун
/
stm32-sensor-base2
test
mbed_config.h
- Committer:
- ruslanbredun
- Date:
- 2020-12-14
- Revision:
- 16:82251ada9b04
- Parent:
- 1:3c6771928b35
File content as of revision 16:82251ada9b04:
/* * mbed SDK * Copyright (c) 2017 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ // Automatically generated configuration file. // DO NOT EDIT, content will be overwritten. #ifndef __MBED_CONFIG_DATA__ #define __MBED_CONFIG_DATA__ // Configuration parameters #define CLOCK_SOURCE USE_PLL_HSE_EXTC|USE_PLL_HSI // set by target:MCU_STM32F103xB #define LPTICKER_DELAY_TICKS 1 // set by target:MCU_STM32 #define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 0 // set by library:platform #define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform #define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform #define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform #define MBED_CONF_PLATFORM_ERROR_DECODE_HTTP_URL_STR "\nFor more info, visit: https://armmbed.github.io/mbedos-error/?error=0x%08X" // set by library:platform #define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform #define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform #define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform #define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform #define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 0 // set by library:platform #define MBED_CONF_PLATFORM_FORCE_NON_COPYABLE_ERROR 0 // set by library:platform #define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform #define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform #define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 9600 // set by library:platform #define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform #define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 0 // set by library:platform #define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 0 // set by library:platform #define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform #define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform #define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x400 // set by target:MCU_STM32_BAREMETAL #define MBED_CONF_TARGET_CONSOLE_UART 1 // set by target:Target #define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 4 // set by target:MCU_STM32 #define MBED_CONF_TARGET_DEFAULT_ADC_VREF NAN // set by target:Target #define MBED_CONF_TARGET_INIT_US_TICKER_AT_BOOT 1 // set by target:MCU_STM32 #define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:MCU_STM32 #define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1 // set by target:MCU_STM32 #define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:MCU_STM32 #define MBED_CONF_TARGET_MPU_ROM_END 0x0fffffff // set by target:Target #define MBED_CONF_TARGET_TICKLESS_FROM_US_TICKER 0 // set by target:Target #define MBED_CONF_TARGET_XIP_ENABLE 0 // set by target:Target #endif