Diff: mbed/platform/mbed_interface.h

Revision:

12:406f75196a12

Parent:

11:32eeb052cda5

Child:

13:0c732e06d675

--- a/mbed/platform/mbed_interface.h	Wed Aug 26 14:26:27 2020 +0530
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,183 +0,0 @@
-
-/** \addtogroup platform */
-/** @{*/
-/**
- * \defgroup platform_interface Network interface and other utility functions
- * @{
- */
-
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_INTERFACE_H
-#define MBED_INTERFACE_H
-
-#include <stdarg.h>
-
-#include "mbed_toolchain.h"
-#include "device.h"
-
-/* Mbed interface mac address
- * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
- * otherwise MAC_ADD_x are used.
- */
-#define MBED_MAC_ADDR_INTERFACE 0x00
-#define MBED_MAC_ADDR_0  MBED_MAC_ADDR_INTERFACE
-#define MBED_MAC_ADDR_1  MBED_MAC_ADDR_INTERFACE
-#define MBED_MAC_ADDR_2  MBED_MAC_ADDR_INTERFACE
-#define MBED_MAC_ADDR_3  MBED_MAC_ADDR_INTERFACE
-#define MBED_MAC_ADDR_4  MBED_MAC_ADDR_INTERFACE
-#define MBED_MAC_ADDR_5  MBED_MAC_ADDR_INTERFACE
-#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if DEVICE_SEMIHOST
-
-/**
- * \defgroup platform_interface interface functions
- * @{
- */
-
-/** Functions to control the mbed interface
- *
- * mbed Microcontrollers have a built-in interface to provide functionality such as
- * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
- * system. These functions provide means to control the interface suing semihost
- * calls it supports.
- */
-
-/** Determine whether the mbed interface is connected, based on whether debug is enabled
- *
- *  @returns
- *    1 if interface is connected,
- *    0 otherwise
- */
-int mbed_interface_connected(void);
-
-/** Instruct the mbed interface to reset, as if the reset button had been pressed
- *
- *  @returns
- *    1 if successful,
- *    0 otherwise (e.g. interface not present)
- */
-int mbed_interface_reset(void);
-
-/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
- * The interface will still support the USB serial aspect
- *
- *  @returns
- *    0 if successful,
- *   -1 otherwise (e.g. interface not present)
- */
-int mbed_interface_disconnect(void);
-
-/** This will disconnect the debug aspect of the interface, and if the USB cable is not
- * connected, also power down the interface. If the USB cable is connected, the interface
- * will remain powered up and visible to the host
- *
- *  @returns
- *    0 if successful,
- *   -1 otherwise (e.g. interface not present)
- */
-int mbed_interface_powerdown(void);
-
-/** This returns a string containing the 32-character UID of the mbed interface
- *  This is a weak function that can be overwritten if required
- *
- *  @param uid A 33-byte array to write the null terminated 32-byte string
- *
- *  @returns
- *    0 if successful,
- *   -1 otherwise (e.g. interface not present)
- */
-int mbed_interface_uid(char *uid);
-
-#endif
-
-/** This returns a unique 6-byte MAC address, based on the interface UID
- * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
- *
- * This is a weak function that can be overwritten if you want to provide your own mechanism to
- * provide a MAC address.
- *
- *  @param mac A 6-byte array to write the MAC address
- */
-void mbed_mac_address(char *mac);
-
-/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
- */
-MBED_NORETURN void mbed_die(void);
-
-/** Print out an error message.  This is typically called when
- * handling a crash.
- *
- * @note Synchronization level: Interrupt safe
- * @note This uses an internal 128-byte buffer to format the string,
- *       so the output may be truncated. If you need to write a potentially
- *       long string, use mbed_error_puts.
- *
- * @param format    C string that contains data stream to be printed.
- *                  Code snippets below show valid format.
- *
- * @code
- * mbed_error_printf("Failed: %s, file: %s, line %d \n", expr, file, line);
- * @endcode
- *
- */
-void mbed_error_printf(const char *format, ...) MBED_PRINTF(1, 2);
-
-/** Print out an error message.  Similar to mbed_error_printf
- * but uses a va_list.
- *
- * @note Synchronization level: Interrupt safe
- *
- * @param format    C string that contains data stream to be printed.
- * @param arg       Variable arguments list
- *
- */
-void mbed_error_vprintf(const char *format, va_list arg) MBED_PRINTF(1, 0);
-
-/** Print out an error message. This is typically called when
- * handling a crash.
- *
- * Unlike mbed_error_printf, there is no limit to the maximum output
- * length. Unlike standard puts, but like standard fputs, this does not
- * append a '\n' character.
- *
- * @note Synchronization level: Interrupt safe
- *
- * @param str    C string that contains data stream to be printed.
- *
- */
-void mbed_error_puts(const char *str);
-
-/** @deprecated   Renamed to mbed_error_vprintf to match functionality */
-MBED_DEPRECATED_SINCE("mbed-os-5.11",
-                      "Renamed to mbed_error_vprintf to match functionality.")
-void mbed_error_vfprintf(const char *format, va_list arg) MBED_PRINTF(1, 0);
-/** @}*/
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/** @}*/