Diff: mbed/hal/gpio_api.h

Revision:

12:406f75196a12

Parent:

11:32eeb052cda5

Child:

13:0c732e06d675

--- a/mbed/hal/gpio_api.h	Wed Aug 26 14:26:27 2020 +0530
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,134 +0,0 @@
-
-/** \addtogroup hal */
-/** @{*/
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_GPIO_API_H
-#define MBED_GPIO_API_H
-
-#include <stdint.h>
-#include "device.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \defgroup hal_gpio GPIO HAL functions
- * @{
- */
-
-/** Set the given pin as GPIO
- *
- * @param pin The pin to be set as GPIO
- * @return The GPIO port mask for this pin
- **/
-uint32_t gpio_set(PinName pin);
-/* Checks if gpio object is connected (pin was not initialized with NC)
- * @param pin The pin to be set as GPIO
- * @return 0 if port is initialized with NC
- **/
-int gpio_is_connected(const gpio_t *obj);
-
-/** Initialize the GPIO pin
- *
- * @param obj The GPIO object to initialize
- * @param pin The GPIO pin to initialize
- */
-void gpio_init(gpio_t *obj, PinName pin);
-
-/** Set the input pin mode
- *
- * @param obj  The GPIO object
- * @param mode The pin mode to be set
- */
-void gpio_mode(gpio_t *obj, PinMode mode);
-
-/** Set the pin direction
- *
- * @param obj       The GPIO object
- * @param direction The pin direction to be set
- */
-void gpio_dir(gpio_t *obj, PinDirection direction);
-
-/** Set the output value
- *
- * @param obj   The GPIO object
- * @param value The value to be set
- */
-void gpio_write(gpio_t *obj, int value);
-
-/** Read the input value
- *
- * @param obj The GPIO object
- * @return An integer value 1 or 0
- */
-int gpio_read(gpio_t *obj);
-
-// the following functions are generic and implemented in the common gpio.c file
-// TODO: fix, will be moved to the common gpio header file
-
-/** Init the input pin and set mode to PullDefault
- *
- * @param gpio The GPIO object
- * @param pin  The pin name
- */
-void gpio_init_in(gpio_t *gpio, PinName pin);
-
-/** Init the input pin and set the mode
- *
- * @param gpio  The GPIO object
- * @param pin   The pin name
- * @param mode  The pin mode to be set
- */
-void gpio_init_in_ex(gpio_t *gpio, PinName pin, PinMode mode);
-
-/** Init the output pin as an output, with predefined output value 0
- *
- * @param gpio The GPIO object
- * @param pin  The pin name
- * @return     An integer value 1 or 0
- */
-void gpio_init_out(gpio_t *gpio, PinName pin);
-
-/** Init the pin as an output and set the output value
- *
- * @param gpio  The GPIO object
- * @param pin   The pin name
- * @param value The value to be set
- */
-void gpio_init_out_ex(gpio_t *gpio, PinName pin, int value);
-
-/** Init the pin to be in/out
- *
- * @param gpio      The GPIO object
- * @param pin       The pin name
- * @param direction The pin direction to be set
- * @param mode      The pin mode to be set
- * @param value     The value to be set for an output pin
- */
-void gpio_init_inout(gpio_t *gpio, PinName pin, PinDirection direction, PinMode mode, int value);
-
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/** @}*/