Diff: mbed/drivers/RawSerial.h

Revision:

12:406f75196a12

Parent:

11:32eeb052cda5

Child:

13:0c732e06d675

--- a/mbed/drivers/RawSerial.h	Wed Aug 26 14:26:27 2020 +0530
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_RAW_SERIAL_H
-#define MBED_RAW_SERIAL_H
-
-#include "platform/platform.h"
-
-#if DEVICE_SERIAL || defined(DOXYGEN_ONLY)
-
-#include "mbed_toolchain.h"
-#include "drivers/SerialBase.h"
-#include "hal/serial_api.h"
-#include "platform/NonCopyable.h"
-
-namespace mbed {
-/** \addtogroup drivers */
-
-/** A serial port (UART) for communication with other serial devices
- * This is a variation of the Serial class that doesn't use streams,
- * thus making it safe to use in interrupt handlers with the RTOS.
- *
- * Can be used for Full Duplex communication, or Simplex by specifying
- * one pin as NC (Not Connected)
- *
- * @note Synchronization level: Not protected
- *
- * Example:
- * @code
- * // Send a char to the PC
- *
- * #include "mbed.h"
- *
- * RawSerial pc(USBTX, USBRX);
- *
- * int main() {
- *     pc.putc('A');
- * }
- * @endcode
- * @ingroup drivers
- */
-class RawSerial: public SerialBase, private NonCopyable<RawSerial> {
-
-public:
-    /** Create a RawSerial port, connected to the specified transmit and receive pins, with the specified baud.
-     *
-     *  @param tx Transmit pin
-     *  @param rx Receive pin
-     *  @param baud The baud rate of the serial port (optional, defaults to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
-     *
-     *  @note
-     *    Either tx or rx may be specified as NC if unused
-     */
-    RawSerial(PinName tx, PinName rx, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
-
-    /** Write a char to the serial port
-     *
-     * @param c The char to write
-     *
-     * @returns The written char or -1 if an error occurred
-     */
-    int putc(int c);
-
-    /** Read a char from the serial port
-     *
-     * @returns The char read from the serial port
-     */
-    int getc();
-
-    /** Write a string to the serial port
-     *
-     * @param str The string to write
-     *
-     * @returns 0 if the write succeeds, EOF for error
-     */
-    int puts(const char *str);
-
-    int printf(const char *format, ...) MBED_PRINTF_METHOD(1, 2);
-
-#if !(DOXYGEN_ONLY)
-protected:
-
-    /* Acquire exclusive access to this serial port
-     */
-    virtual void lock(void);
-
-    /* Release exclusive access to this serial port
-     */
-    virtual void unlock(void);
-#endif
-};
-
-} // namespace mbed
-
-#endif
-
-#endif