Diff: BD_SD_DISCO_F746NG.h

Revision:

0:131c3e1d831e

diff -r 000000000000 -r 131c3e1d831e BD_SD_DISCO_F746NG.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BD_SD_DISCO_F746NG.h	Sat Mar 24 16:27:20 2018 +0000
@@ -0,0 +1,207 @@
+/* SD/MMC Block device Library for MBED-OS
+ * Copyright 2017 Roy Krikke
+ * 
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * 
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+#ifndef BD_SD_DISCO_F746NG_H
+#define BD_SD_DISCO_F746NG_H
+
+#include "mbed.h"
+#include "BlockDevice.h"
+#include "platform/PlatformMutex.h"
+#include "stm32746g_discovery_sd.h"
+
+#define BD_SD_DISCO_F746NG_MAJOR_VERSION 1
+#define BD_SD_DISCO_F746NG_MINOR_VERSION 0
+#define BD_SD_DISCO_F746NG_PATCH_VERSION 0
+
+/**
+ * BD_SD_DISCO_F746NG class.
+ *  Block device class for creating a block device to access a SD/MMC card via SD/MMC interface on DISCO_F746NG
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ * #include "BD_SD_DISCO_F746NG.h"
+ * 
+ * DigitalOut led (LED1);
+ * 
+ * // Instantiate the Block Device for sd card on DISCO-F746NG
+ * BD_SD_DISCO_F746NG bd;
+ * uint8_t block[512] = "Hello World!\n";
+ * 
+ * int
+ * main () {
+ *   Serial pc (SERIAL_TX, SERIAL_RX);
+ *   pc.baud (115200);
+ *   printf ("Start\n");
+ * 
+ *   // Call the BD_SD_DISCO_F746NG instance initialisation method.
+ *   printf ("sd card init...\n");
+ *   if (0 != bd.init ()) {
+ *     printf ("Init failed \n");
+ *     return -1;
+ *   }
+ * 
+ *   printf ("sd size: %llu\n", bd.size ());
+ *   printf ("sd read size: %llu\n", bd.get_read_size ());
+ *   printf ("sd program size: %llu\n", bd.get_program_size ());
+ *   printf ("sd erase size: %llu\n\n", bd.get_erase_size ());
+ * 
+ *   printf ("sd erase...\n");
+ *   if (0 != bd.erase (0, bd.get_erase_size ())) {
+ *     printf ("Error Erasing block \n");
+ *   }
+ * 
+ *   // Write some the data block to the device
+ *   printf ("sd write: %s\n", block);
+ *   if (0 == bd.program (block, 0, 512)) {
+ *     // read the data block from the device
+ *     printf ("sd read: ");
+ *     if (0 == bd.read (block, 0, 512)) {
+ *       // print the contents of the block
+ *       printf ("%s", block);
+ *     }
+ *   }
+ * 
+ *   // Call the BD_SD_DISCO_F746NG instance de-initialisation method.
+ *   printf ("sd card deinit...\n");
+ *   if (0 != bd.deinit ()) {
+ *     printf ("Deinit failed \n");
+ *     return -1;
+ *   }
+ * 
+ *   // Blink led with 2 Hz   
+ *   while (true) {
+ *     led = !led;
+ *     wait (0.5);
+ *   }
+ * }
+ * @endcode
+ * 
+ */
+class BD_SD_DISCO_F746NG : public BlockDevice {
+  public:
+
+    /** Lifetime of the memory block device
+     *
+     * Only a block size of 512 bytes is supported
+     * 
+     */
+    BD_SD_DISCO_F746NG ();
+    virtual
+    ~BD_SD_DISCO_F746NG ();
+
+    /** Initialize a block device
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int
+    init ();
+
+    /** Deinitialize a block device
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int
+    deinit ();
+
+    /** Read blocks from a block device
+     *
+     *  @param buffer   Buffer to read blocks into
+     *  @param addr     Address of block to begin reading from
+     *  @param size     Size to read in bytes, must be a multiple of read block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int
+    read (void *buffer, bd_addr_t addr, bd_size_t size);
+
+    /** Program blocks to a block device
+     *
+     *  The blocks must have been erased prior to being programmed
+     *
+     *  @param buffer   Buffer of data to write to blocks
+     *  @param addr     Address of block to begin writing to
+     *  @param size     Size to write in bytes, must be a multiple of program block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int
+    program (const void *buffer, bd_addr_t addr, bd_size_t size);
+
+    /** Erase blocks on a block device
+     *
+     *  The state of an erased block is undefined until it has been programmed
+     *
+     *  @param addr     Address of block to begin erasing
+     *  @param size     Size to erase in bytes, must be a multiple of erase block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int
+    erase (bd_addr_t addr, bd_size_t size);
+
+    /** Get the size of a readable block
+     *
+     *  @return         Size of a readable block in bytes
+     */
+    virtual bd_size_t
+    get_read_size () const;
+
+    /** Get the size of a programable block
+     *
+     *  @return         Size of a programable block in bytes
+     */
+    virtual bd_size_t
+    get_program_size () const;
+
+    /** Get the size of a eraseable block
+     *
+     *  @return         Size of a eraseable block in bytes
+     */
+    virtual bd_size_t
+    get_erase_size () const;
+
+    /** Get the total size of the underlying device
+     *
+     *  @return         Size of the underlying device in bytes
+     */
+    virtual bd_size_t
+    size () const;
+
+  private:
+    uint8_t _card_type;
+    bd_size_t _read_size;
+    bd_size_t _program_size;
+    bd_size_t _erase_size;
+    bd_size_t _block_size;
+    bd_size_t _capacity_in_blocks;
+    BSP_SD_CardInfo _current_card_info;
+    uint8_t _sd_state;
+    uint32_t _timeout;
+    PlatformMutex _mutex;bool _is_initialized;
+
+    virtual void
+    lock () {
+      _mutex.lock ();
+    }
+
+    virtual void
+    unlock () {
+      _mutex.unlock ();
+    }
+
+};
+
+#endif /* BD_SD_DISCO_F746NG_H */
+