Diff: DS18B20.cpp

Revision:

0:bfcb5b67b1d6

diff -r 000000000000 -r bfcb5b67b1d6 DS18B20.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/DS18B20.cpp	Sat Mar 17 14:15:20 2012 +0000
@@ -0,0 +1,103 @@
+/*
+* DS18B20. Maxim DS18B20 One-Wire Thermometer. 
+* Uses the OneWireCRC library.
+*
+* Copyright (C) <2010> Petras Saduikis <petras@petras.co.uk>
+*
+* This file is part of OneWireThermometer.
+*
+* OneWireThermometer is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+* 
+* OneWireThermometer is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with OneWireThermometer.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "DS18B20.h"
+#include "DebugTrace.h"
+
+DebugTrace pc_ds18B20(ON, TO_SERIAL);
+
+DS18B20::DS18B20(bool crcOn, bool useAddr, bool parasitic, PinName pin) : 
+    OneWireThermometer(crcOn, useAddr, parasitic, pin, DS18B20_ID)
+{
+}
+
+void DS18B20::setResolution(eResolution resln)
+{
+    // as the write to the configuration register involves a write to the
+    // high and low alarm bytes, need to read these registers first
+    // and copy them back on the write
+    
+    BYTE read_data[THERMOM_SCRATCHPAD_SIZE];
+    BYTE write_data[ALARM_CONFIG_SIZE];
+    
+    if (readAndValidateData(read_data))
+    {
+        // copy alarm and config data to write data
+        for (int k = 2; k < 5; k++)
+        {
+            write_data[k - 2] = read_data[k];
+        }
+        int config = write_data[2];
+        config &= 0x9F;
+        config ^= (resln << 5);
+        write_data[2] = config;
+        
+        resetAndAddress();
+        oneWire.writeByte(WRITESCRATCH);
+        for (int k = 0; k < 3; k++)
+        {
+            oneWire.writeByte(write_data[k]);
+        }
+        
+        // remember it so we can use the correct delay in reading the temperature
+        // for parasitic power
+        resolution = resln; 
+    }
+}
+
+float DS18B20::calculateTemperature(BYTE* data)
+{
+    bool signBit = false;
+    if (data[TEMPERATURE_MSB] & 0x80) signBit = true;
+        
+    int read_temp = (data[TEMPERATURE_MSB] << 8) + data[TEMPERATURE_LSB];
+    if (signBit)
+    {
+        read_temp = (read_temp ^ 0xFFFF) + 1;    // two's complement
+        read_temp *= -1;
+    }
+    
+    int resolution = (data[CONFIG_REG_BYTE] & 0x60) >> 5; // mask off bits 6,5 and move to 1,0
+    switch (resolution)
+    {
+        case nineBit:    // 0.5 deg C increments
+            read_temp &= 0xFFF8;                // bits 2,1,0 are undefined
+             //pc_ds18B20.traceOut("9 bit resolution ...\r\n");
+            break;
+        case tenBit:     // 0.25 deg C increments
+            read_temp &= 0xFFFC;                // bits 1,0 are undefined
+            //pc_ds18B20.traceOut("10 bit resolution ...\r\n");
+            break;
+        case elevenBit:  // 0.125 deg C increments
+            read_temp &= 0xFFFE;                // bit 0 is undefined
+            //pc_ds18B20.traceOut("11 bit resolution ...\r\n");
+            break;
+        case twelveBit:  // 0.0625 deg C increments
+            //pc_ds18B20.traceOut("12 bit resolution ...\r\n");
+            break;
+    }
+    float realTemp = (float)read_temp/16 ;
+                 
+    //pc_ds18B20.traceOut("TEMP_READ/REAL TEMP: %f \r\n", realTemp); 
+               
+    return realTemp;
+}
\ No newline at end of file