Roger Zuber
/
HSL_4_8_A13_1_Thread
Multithreading Solution for A13 Temperatur, Servo, Display Roger Zuber, BZTF
Diff: ShiftOut.h
- Revision:
- 0:680471563758
diff -r 000000000000 -r 680471563758 ShiftOut.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ShiftOut.h Thu Sep 23 18:04:03 2021 +0000 @@ -0,0 +1,144 @@ +/* + * Copyright 2015 Benjamin R. Moeklegaard + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. +*/ + +#ifndef SHIFT_H +#define SHIFT_H + +//Constant for managing n-numbers of registers, Function supported (writeByte, writeBit, writeBitAtPos) +#define REGISTER_CNT 2 +/** + * This is a library for easy interfacing with the SN74HC595N 8-bit Shift Register. + * The library includes functions for writing bits, bytes and animation array to the register. + * The Functions are mainly based for writting 8-bits or one byte and can be moddified to work + * with multiple shift registers. + *@code + * #include "mbed.h" + * #include "ShiftOut.h" + * ShiftOut reg(PA_8, PA_9, PC_7, PB_6, D1); + * + * int main(){ + * while(1){ + * reg.writeBitAtPos(3, 1); + * wait(2); + * reg.writeByte(0x30); + * wait(2); + * } + * }@endcode + */ + +class ShiftOut +{ +public: + + /** Create a ShiftOut interface + * + * @param ser Serial data line + * @param srclk Data register clock + * @param rclk Output register clock + * @param oe Output enable (Active Low) + * @param reset Reset line for data register (Active Low) + * Writing Byte Example: + * @code + * #include "mbed.h" + * #include "ShiftOut.h" + * + * ShiftOut reg(PA_8, PA_9, PC_7, PB_6, D1); + * int main() + * { + * reg.writeByte(0x00); //Writes each bit to the SN74HC595N + * while(1) { + * wait_ms(300); + * } + * } + * @endcode + */ + + +ShiftOut(PinName ser, PinName srclk, PinName rclk, + PinName oe, PinName reset); + +/** + * Writes a byte to the shift register + * @param byte 0xXX or numbers from 0-255 + */ +void writeByte(unsigned char); + +void write2Byte(unsigned int); + + +/** + * Writes a bit to the first output on the shift register + * @param bit 0 or 1 + */ + +void writeBit(unsigned char); + +/** + * Writes bits from an 2D array, with configurable delay + * @param int array, int lines, int delay_ms + * writes a 2D array with n-lines with a configurable delay in ms + * @code + * #include "mbed.h" + * #include "ShiftOut.h" + * ShiftOut reg(PA_8, PA_9, PC_7, PB_6, D1); + * + * int main(){ + * int strobe[][8]= {{1,0,0,0,0,0,0,0}, + * {0,1,0,0,0,0,0,0}, + * {0,0,1,0,0,0,0,0}, + * {0,0,0,1,0,0,0,0}, + * {0,0,0,0,1,0,0,0}, + * {0,0,0,0,0,1,0,0}, + * {0,0,0,0,0,0,1,0}, + * {0,0,0,0,0,0,0,1}}; + * while(1){ + * reg.animate(strobe, 8, 200); + * } + * } + * @endcode + */ + +void animate(int[][8], int, int); + +/** + * Demonstrates two animation examples by using the animate function + */ + +void animationExample(void); + +/** + * Writes the desired state to the output on the shift register + * @param char output, state + */ + +void writeBitAtPos(unsigned char, bool); + +/** + * Writes the corresponding array item to the output on the shift register + * @param char array writes to the output from a state array + */ + +void writeArray(char[8]); + +protected: +void updateRegister(void); +void updateOutput(void); +void clearStateArray(void); +DigitalOut DSERIAL, LATCH, RCLK, SRCLK, RESET; + +}; + +#endif