Diff: main.cpp

Revision:

17:690d692b29cb

Parent:

16:39e45e59677c

Child:

18:293c2885af81

diff -r 39e45e59677c -r 690d692b29cb main.cpp
--- a/main.cpp	Wed Apr 05 19:17:14 2017 +0000
+++ b/main.cpp	Sun Apr 23 05:09:47 2017 +0000
@@ -7,8 +7,8 @@
 
 #define APIKEY JJAOBK32WOINKT00    //Put "Write key" of your channel in thingspeak.com 
 #define IP "184.106.153.149"       // IP Address of "api.thingspeak.com\"
-#define WIFI_SSID "Redmi"
-#define WIFI_PASS "akash12345"
+#define WIFI_SSID "Batman2G"
+#define WIFI_PASS "Alien12345"
 
 Serial FRDM_UART_Debug(USBTX,USBRX);
 
@@ -16,16 +16,16 @@
 // Options are TX-RX - PTB11 - PTB10 , PTC17 - PTC16 , PTC15 - PTC14
 
 SPI SPI_Bus(PTD2,PTD3,PTD1); // (MOSI MISO CLK)setup SPI interface
-DigitalOut SPI_CS_AMM(PTB9);
-DigitalOut SPI_CS_VOLT(PTA1);
+DigitalOut SPI_CS_AMM(PTA2);
+DigitalOut SPI_CS_VOLT(PTB9);
 
 I2C I2C_Bus(PTE25,PTE24);
 
 AnalogIn AN_Thermo(PTB2); // Thermocouple Analog Input
 
-DigitalIn DG_Motion(PTB3); // Motion module Digital Input
+DigitalIn DG_Motion(PTC2); // Motion module Digital Input
 
-DHT DHT_Temp_Hum(PTA2,DHT22); //DHT Sensor
+DHT DHT_Temp_Hum(PTC4,DHT22); //DHT Sensor
 
 const int Light_I2C_Addr = 0x88;
 
@@ -267,7 +267,8 @@
     FRDM_UART_Debug.printf(ESP_8266_CMD_Send);
     wait(2);
     
-    if(!strcmp(ESP_8266_CMD_Recv,"WIFI CONNECTED"))
+    
+    //if(!strcmp(ESP_8266_CMD_Recv,"WIFI CONNECTED"))
     {
         strcpy(ESP_8266_CMD_Send,"AT+CWJAP=\"");
         strcat(ESP_8266_CMD_Send,WIFI_SSID);
@@ -281,8 +282,8 @@
         ESP_8266_UART.RcvReply(ESP_8266_CMD_Recv, 400);       
         FRDM_UART_Debug.printf(ESP_8266_CMD_Recv); 
     }
-    else 
-        FRDM_UART_Debug.printf("Wifi was preconfigured\r\n"); 
+    //else 
+       // FRDM_UART_Debug.printf("Wifi was preconfigured\r\n"); 
         
     strcpy(ESP_8266_CMD_Send,"AT+CIPMUX=0");
     ESP_8266_UART.SendCMD(ESP_8266_CMD_Send);