Diff: USB_Host/settings.h

Revision:

0:b1ce54272580

Child:

1:da31140f2a1c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USB_Host/settings.h	Sat Jan 18 15:06:35 2020 +0000
@@ -0,0 +1,225 @@
+/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+Contact information
+-------------------
+
+Circuits At Home, LTD
+Web      :  http://www.circuitsathome.com
+e-mail   :  support@circuitsathome.com
+ */
+
+/*
+warning
+#define _usb_h_
+#define MBED_H
+*/
+
+#ifndef USB_HOST_SHIELD_SETTINGS_H
+#define USB_HOST_SHIELD_SETTINGS_H
+#include "macros.h"
+
+////////////////////////////////////////////////////////////////////////////////
+// SPI Configuration
+////////////////////////////////////////////////////////////////////////////////
+#ifndef USB_SPI
+#define USB_SPI SPI
+//#define USB_SPI SPI1
+#endif
+
+////////////////////////////////////////////////////////////////////////////////
+// DEBUGGING
+////////////////////////////////////////////////////////////////////////////////
+
+/* Set this to 1 to activate serial debugging */
+#define ENABLE_UHS_DEBUGGING 0
+
+/* This can be used to select which serial port to use for debugging if
+ * multiple serial ports are available.
+ * For example Serial3.
+ */
+
+#define USB_HOST_SERIAL ; //
+#ifndef USB_HOST_SERIAL
+#define USB_HOST_SERIAL //
+#endif
+
+////////////////////////////////////////////////////////////////////////////////
+// Manual board activation
+////////////////////////////////////////////////////////////////////////////////
+
+/* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */
+#define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually
+
+/* Set this to 1 if you are using a Black Widdow */
+#define USE_UHS_BLACK_WIDDOW 0
+
+/* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */
+#define USE_XMEM_SPI_LOCK 0
+
+////////////////////////////////////////////////////////////////////////////////
+// Wii IR camera
+////////////////////////////////////////////////////////////////////////////////
+
+/* Set this to 1 to activate code for the Wii IR camera */
+#define ENABLE_WII_IR_CAMERA 0
+
+////////////////////////////////////////////////////////////////////////////////
+// MASS STORAGE
+////////////////////////////////////////////////////////////////////////////////
+// <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>>
+// Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives.
+// Each LUN needs ~13 bytes to be able to track the state of each unit.
+#ifndef MASS_MAX_SUPPORTED_LUN
+#define MASS_MAX_SUPPORTED_LUN 8
+#endif
+
+////////////////////////////////////////////////////////////////////////////////
+// Set to 1 to use the faster spi4teensy3 driver.
+////////////////////////////////////////////////////////////////////////////////
+#ifndef USE_SPI4TEENSY3
+#define USE_SPI4TEENSY3 1
+#endif
+
+// Disabled on the Teensy LC, as it is incompatible for now
+#if defined(__MKL26Z64__)
+#undef USE_SPI4TEENSY3
+#define USE_SPI4TEENSY3 0
+#endif
+
+////////////////////////////////////////////////////////////////////////////////
+// AUTOMATIC Settings
+////////////////////////////////////////////////////////////////////////////////
+
+// No user serviceable parts below this line.
+// DO NOT change anything below here unless you are a developer!
+
+#include "version_helper.h"
+
+#if defined(__GNUC__) && defined(__AVR__)
+#ifndef GCC_VERSION
+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#endif
+#if GCC_VERSION < 40602 // Test for GCC < 4.6.2
+#ifdef PROGMEM
+#undef PROGMEM
+#define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4
+#ifdef PSTR
+#undef PSTR
+#define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0]; })) // Copied from pgmspace.h in avr-libc source
+#endif
+#endif
+#endif
+#endif
+
+#if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING
+#define DEBUG_USB_HOST
+#endif
+
+#if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA
+#define WIICAMERA
+#endif
+
+// To use some other locking (e.g. freertos),
+// define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock.
+// NOTE: NO argument is passed. You have to do this within your routine for
+// whatever you are using to lock and unlock.
+#if !defined(XMEM_ACQUIRE_SPI)
+#if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API)
+#include <xmem.h>
+#else
+#define XMEM_ACQUIRE_SPI() (void(0))
+#define XMEM_RELEASE_SPI() (void(0))
+#endif
+#endif
+
+#if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP)
+#include <xmem.h>
+#else
+#define EXT_RAM 0
+#endif
+
+#if defined(CORE_TEENSY) && defined(KINETISK)
+#define USING_SPI4TEENSY3 USE_SPI4TEENSY3
+#else
+#define USING_SPI4TEENSY3 0
+#endif
+
+#if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3
+#include <SPI.h> // Use the Arduino SPI library for the Arduino Due, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available
+#endif
+#ifdef RBL_NRF51822
+#include <nrf_gpio.h>
+#include <SPI_Master.h>
+#define SPI SPI_Master
+#define MFK_CASTUINT8T (uint8_t) // RBLs return type for sizeof needs casting to uint8_t
+#endif
+#if defined(__PIC32MX__) || defined(__PIC32MZ__)
+#include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library
+#endif
+
+#if defined(ESP8266) || defined(ESP32)
+#define MFK_CASTUINT8T (uint8_t) // ESP return type for sizeof needs casting to uint8_t
+#endif
+
+/*
+#ifdef STM32F4
+#include "stm32f4xx_hal.h"
+extern SPI_HandleTypeDef SPI_Handle; // Needed to be declared in your main.cpp
+#endif
+*/
+
+// Fix defines on Arduino Due
+#ifdef ARDUINO_SAM_DUE
+#ifdef tokSETUP
+#undef tokSETUP
+#endif
+#ifdef tokIN
+#undef tokIN
+#endif
+#ifdef tokOUT
+#undef tokOUT
+#endif
+#ifdef tokINHS
+#undef tokINHS
+#endif
+#ifdef tokOUTHS
+#undef tokOUTHS
+#endif
+#endif
+
+// Set defaults
+#ifndef MFK_CASTUINT8T
+#define MFK_CASTUINT8T
+#endif
+
+// Workaround issue: https://github.com/esp8266/Arduino/issues/2078
+#ifdef ESP8266
+#undef PROGMEM
+#define PROGMEM
+#undef PSTR
+#define PSTR(s) (s)
+#undef pgm_read_byte
+#define pgm_read_byte(addr) (*reinterpret_cast<const uint8_t *>(addr))
+#undef pgm_read_word
+#define pgm_read_word(addr) (*reinterpret_cast<const uint16_t *>(addr))
+#endif
+
+#ifdef ARDUINO_ESP8266_WIFIO
+#error "This board is currently not supported"
+#endif
+
+#endif /* SETTINGS_H */