Richard Kuo / Mbed OS NTOUEE-mbed-Client

This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.

Fork of mbed-os-example-client by mbed-os-examples

Diff: simpleclient.h

Revision:
42:d9a3043214a6
Parent:
37:9a9428fc4b26
Child:
43:90fccf21be20
diff -r 496e5ec1f1bd -r d9a3043214a6 simpleclient.h
--- a/simpleclient.h	Sat Dec 10 22:30:09 2016 +0000
+++ b/simpleclient.h	Sun Dec 11 08:15:09 2016 +0000
@@ -38,11 +38,23 @@
 
 #define STRINGIFY(s) #s
 
-//Select network stack mode: IPv4 or IPv6
-M2MInterface::NetworkStack NETWORK_STACK = M2MInterface::LwIP_IPv4;
+#if defined (MESH) || (MBED_CONF_LWIP_IPV6_ENABLED==true)
+    // Mesh is always IPV6 - also WiFi and ETH can be IPV6 if IPV6 is enabled
+    M2MInterface::NetworkStack NETWORK_STACK = M2MInterface::LwIP_IPv6;
+#else
+    // Everything else - we assume it's IPv4
+    M2MInterface::NetworkStack NETWORK_STACK = M2MInterface::LwIP_IPv4;
+#endif
 
-//Select binding mode: UDP or TCP
-M2MInterface::BindingMode SOCKET_MODE = M2MInterface::TCP;
+//Select binding mode: UDP or TCP -- note - Mesh networking is IPv6 UDP ONLY
+#ifdef MESH
+	M2MInterface::BindingMode SOCKET_MODE = M2MInterface::UDP;
+#else
+	// WiFi or Ethernet supports both - TCP by default to avoid
+	// NAT problems, but UDP will also work - IF you configure
+	// your network right.
+    M2MInterface::BindingMode SOCKET_MODE = M2MInterface::TCP;
+#endif
 
 
 // MBED_DOMAIN and MBED_ENDPOINT_NAME come
@@ -107,13 +119,6 @@
     _server_address = server_address;
     uint16_t port = rand() % 65535 + 12345;
 
-    // In case of Mesh or Thread use M2MInterface::Nanostack_IPv6
-#if MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND
-    NETWORK_STACK = M2MInterface::Nanostack_IPv6;
-#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD
-    NETWORK_STACK = M2MInterface::Nanostack_IPv6;
-#endif
-
     // create mDS interface object, this is the base object everything else attaches to
     _interface = M2MInterfaceFactory::create_interface(*this,
                                                       MBED_ENDPOINT_NAME,       // endpoint name string