File content as of revision 32:bca3f5f442b3:

/* WiFi Example
 * Copyright (c) 2016 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "TCPSocket.h"

#define WIFI_ESP8266    1
#define WIFI_IDW01M1    2

#if TARGET_UBLOX_EVK_ODIN_W2
#include "OdinWiFiInterface.h"
OdinWiFiInterface wifi;

#elif TARGET_REALTEK_RTL8195AM
#include "RTWInterface.h"
RTWInterface wifi;

#else
#if MBED_CONF_APP_WIFI_SHIELD == WIFI_ESP8266
#if !TARGET_FF_MORPHO
#error [NOT_SUPPORTED] Only Morpho form factor devices are supported for this shield at this time
#endif // !TARGET_FF_MORPHO
#else
#if !TARGET_FF_ARDUINO
#error [NOT_SUPPORTED] Only Arduino form factor devices are supported for this shield at this time
#endif // !TARGET_FF_ARDUINO
#endif // MBED_CONF_APP_WIFI_SHIELD != WIFI_ESP8266

#if MBED_CONF_APP_WIFI_SHIELD == WIFI_ESP8266
#include "ESP8266Interface.h"
ESP8266Interface wifi(MBED_CONF_APP_WIFI_TX, MBED_CONF_APP_WIFI_RX);
#elif MBED_CONF_APP_WIFI_SHIELD == WIFI_IDW01M1
#include "SpwfSAInterface.h"
SpwfSAInterface wifi(MBED_CONF_APP_WIFI_TX, MBED_CONF_APP_WIFI_RX);
#endif // MBED_CONF_APP_WIFI_SHIELD == WIFI_IDW01M1

#endif // TARGET_UBLOX_EVK_ODIN_W2

const char *sec2str(nsapi_security_t sec)
{
    switch (sec) {
        case NSAPI_SECURITY_NONE:
            return "None";
        case NSAPI_SECURITY_WEP:
            return "WEP";
        case NSAPI_SECURITY_WPA:
            return "WPA";
        case NSAPI_SECURITY_WPA2:
            return "WPA2";
        case NSAPI_SECURITY_WPA_WPA2:
            return "WPA/WPA2";
        case NSAPI_SECURITY_UNKNOWN:
        default:
            return "Unknown";
    }
}

void scan_demo(WiFiInterface *wifi)
{
    WiFiAccessPoint *ap;

    printf("Scan:\r\n");

    int count = wifi->scan(NULL,0);

    /* Limit number of network arbitrary to 15 */
    count = count < 15 ? count : 15;

    ap = new WiFiAccessPoint[count];
    count = wifi->scan(ap, count);
    for (int i = 0; i < count; i++)
    {
        printf("Network: %s secured: %s BSSID: %hhX:%hhX:%hhX:%hhx:%hhx:%hhx RSSI: %hhd Ch: %hhd\r\n", ap[i].get_ssid(),
               sec2str(ap[i].get_security()), ap[i].get_bssid()[0], ap[i].get_bssid()[1], ap[i].get_bssid()[2],
               ap[i].get_bssid()[3], ap[i].get_bssid()[4], ap[i].get_bssid()[5], ap[i].get_rssi(), ap[i].get_channel());
    }
    printf("%d networks available.\r\n", count);

    delete[] ap;
}

void http_demo(NetworkInterface *net)
{
    TCPSocket socket;
    nsapi_error_t response;

    printf("Sending HTTP request to www.arm.com...\r\n");

    // Open a socket on the network interface, and create a TCP connection to www.arm.com
    socket.open(net);
    response = socket.connect("www.arm.com", 80);
    if(0 != response) {
        printf("Error connecting: %d\r\n", response);
        socket.close();
        return;
    }

    // Send a simple http request
    char sbuffer[] = "GET / HTTP/1.1\r\nHost: www.arm.com\r\n\r\n";
    nsapi_size_t size = sizeof sbuffer;
    response = 0;
    while(size)
    {
        response = socket.send(sbuffer+response, size);
        if (response < 0) {
            printf("Error sending data: %d\r\n", response);
            socket.close();
            return;
        } else {
            size -= response;
            // Check if entire message was sent or not
            printf("sent %d [%.*s]\r\n", response, strstr(sbuffer, "\r\n")-sbuffer, sbuffer);
        }
    }

    // Recieve a simple http response and print out the response line
    char rbuffer[64];
    response = socket.recv(rbuffer, sizeof rbuffer);
    if (response < 0) {
        printf("Error receiving data: %d\r\n", response);
    } else {
        printf("recv %d [%.*s]\r\n", response, strstr(rbuffer, "\r\n")-rbuffer, rbuffer);
    }

    // Close the socket to return its memory and bring down the network interface
    socket.close();
}

int main()
{
    printf("WiFi example\r\n\r\n");

    scan_demo(&wifi);

    printf("\r\nConnecting...\r\n");
    int ret = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
    if (ret != 0) {
        printf("\r\nConnection error\r\n");
        return -1;
    }

    printf("Success\r\n\r\n");
    printf("MAC: %s\r\n", wifi.get_mac_address());
    printf("IP: %s\r\n", wifi.get_ip_address());
    printf("Netmask: %s\r\n", wifi.get_netmask());
    printf("Gateway: %s\r\n", wifi.get_gateway());
    printf("RSSI: %d\r\n\r\n", wifi.get_rssi());

    http_demo(&wifi);

    wifi.disconnect();

    printf("\r\nDone\r\n");
}