rik te winkel / mbed-dev

Forked mbed-dev as I use an 20 pins stm32F042 and not the 32 pins version

Dependents:   Numitron_clock

Fork of mbed-dev by mbed official

targets/TARGET_NXP/TARGET_LPC43XX/rtc_api.c@153:0a78729d3229, 2017-01-22 (annotated)

Committer:
riktw
Date:
Sun Jan 22 22:20:36 2017 +0000
Revision:
153:0a78729d3229
Parent:
149:156823d33999 
Back to 8Mhz clock. Revision 1.0

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2006-2013 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 *
<> 144:ef7eb2e8f9f7 16 * Ported to NXP LPC43XX by Micromint USA <support@micromint.com>
<> 144:ef7eb2e8f9f7 17 */
<> 144:ef7eb2e8f9f7 18 #include "rtc_api.h"
<> 144:ef7eb2e8f9f7 19
<> 144:ef7eb2e8f9f7 20 // ensure rtc is running (unchanged if already running)
<> 144:ef7eb2e8f9f7 21
<> 144:ef7eb2e8f9f7 22 /* Setup the RTC based on a time structure, ensuring RTC is enabled
<> 144:ef7eb2e8f9f7 23 *
<> 144:ef7eb2e8f9f7 24 * Can be clocked by a 32.768KHz oscillator or prescale divider based on the APB clock
<> 144:ef7eb2e8f9f7 25 * - We want to use the 32khz clock, allowing for sleep mode
<> 144:ef7eb2e8f9f7 26 *
<> 144:ef7eb2e8f9f7 27 * Most registers are not changed by a Reset
<> 144:ef7eb2e8f9f7 28 * - We must initialize these registers between power-on and setting the RTC into operation
<> 144:ef7eb2e8f9f7 29
<> 144:ef7eb2e8f9f7 30 * Clock Control Register
<> 144:ef7eb2e8f9f7 31 * RTC_CCR[0] : Enable - 0 = Disabled, 1 = Enabled
<> 144:ef7eb2e8f9f7 32 * RTC_CCR[1] : Reset - 0 = Normal, 1 = Reset
<> 144:ef7eb2e8f9f7 33 * RTC_CCR[4] : Clock Source - 0 = Prescaler, 1 = 32k Xtal
<> 144:ef7eb2e8f9f7 34 *
<> 144:ef7eb2e8f9f7 35 * The RTC may already be running, so we should set it up
<> 144:ef7eb2e8f9f7 36 * without impacting if it is the case
<> 144:ef7eb2e8f9f7 37 */
<> 144:ef7eb2e8f9f7 38
<> 144:ef7eb2e8f9f7 39 void rtc_init(void) {
<> 144:ef7eb2e8f9f7 40 // Return, if already enabled
<> 144:ef7eb2e8f9f7 41 if (LPC_RTC->CCR & 1)
<> 144:ef7eb2e8f9f7 42 return;
<> 144:ef7eb2e8f9f7 43
<> 144:ef7eb2e8f9f7 44 // Enable 1kHz output of 32kHz oscillator
<> 144:ef7eb2e8f9f7 45 LPC_CREG->CREG0 &= ~((1 << 3) | (1 << 2));
<> 144:ef7eb2e8f9f7 46 LPC_CREG->CREG0 |= (0x03 << 6) | (1 << 1) | (1 << 0);
<> 144:ef7eb2e8f9f7 47
<> 144:ef7eb2e8f9f7 48 // Enable RTC
<> 144:ef7eb2e8f9f7 49 do {
<> 144:ef7eb2e8f9f7 50 LPC_RTC->CCR |= 1 << 0;
<> 144:ef7eb2e8f9f7 51 } while ((LPC_RTC->CCR & 1) == 0);
<> 144:ef7eb2e8f9f7 52 }
<> 144:ef7eb2e8f9f7 53
<> 144:ef7eb2e8f9f7 54 void rtc_free(void) {
<> 144:ef7eb2e8f9f7 55 // [TODO]
<> 144:ef7eb2e8f9f7 56 }
<> 144:ef7eb2e8f9f7 57
<> 144:ef7eb2e8f9f7 58 /*
<> 144:ef7eb2e8f9f7 59 * Little check routine to see if the RTC has been enabled
<> 144:ef7eb2e8f9f7 60 *
<> 144:ef7eb2e8f9f7 61 * Clock Control Register
<> 144:ef7eb2e8f9f7 62 * RTC_CCR[0] : 0 = Disabled, 1 = Enabled
<> 144:ef7eb2e8f9f7 63 *
<> 144:ef7eb2e8f9f7 64 */
<> 144:ef7eb2e8f9f7 65 int rtc_isenabled(void) {
<> 144:ef7eb2e8f9f7 66 return(((LPC_RTC->CCR) & 0x01) != 0);
<> 144:ef7eb2e8f9f7 67 }
<> 144:ef7eb2e8f9f7 68
<> 144:ef7eb2e8f9f7 69 /*
<> 144:ef7eb2e8f9f7 70 * RTC Registers
<> 144:ef7eb2e8f9f7 71 * RTC_SEC Seconds 0-59
<> 144:ef7eb2e8f9f7 72 * RTC_MIN Minutes 0-59
<> 144:ef7eb2e8f9f7 73 * RTC_HOUR Hour 0-23
<> 144:ef7eb2e8f9f7 74 * RTC_DOM Day of Month 1-28..31
<> 144:ef7eb2e8f9f7 75 * RTC_DOW Day of Week 0-6
<> 144:ef7eb2e8f9f7 76 * RTC_DOY Day of Year 1-365
<> 144:ef7eb2e8f9f7 77 * RTC_MONTH Month 1-12
<> 144:ef7eb2e8f9f7 78 * RTC_YEAR Year 0-4095
<> 144:ef7eb2e8f9f7 79 *
<> 144:ef7eb2e8f9f7 80 * struct tm
<> 144:ef7eb2e8f9f7 81 * tm_sec seconds after the minute 0-61
<> 144:ef7eb2e8f9f7 82 * tm_min minutes after the hour 0-59
<> 144:ef7eb2e8f9f7 83 * tm_hour hours since midnight 0-23
<> 144:ef7eb2e8f9f7 84 * tm_mday day of the month 1-31
<> 144:ef7eb2e8f9f7 85 * tm_mon months since January 0-11
<> 144:ef7eb2e8f9f7 86 * tm_year years since 1900
<> 144:ef7eb2e8f9f7 87 * tm_wday days since Sunday 0-6
<> 144:ef7eb2e8f9f7 88 * tm_yday days since January 1 0-365
<> 144:ef7eb2e8f9f7 89 * tm_isdst Daylight Saving Time flag
<> 144:ef7eb2e8f9f7 90 */
<> 144:ef7eb2e8f9f7 91 time_t rtc_read(void) {
<> 144:ef7eb2e8f9f7 92 // Setup a tm structure based on the RTC
<> 144:ef7eb2e8f9f7 93 struct tm timeinfo;
<> 144:ef7eb2e8f9f7 94 timeinfo.tm_sec = LPC_RTC->TIME[RTC_TIMETYPE_SECOND];
<> 144:ef7eb2e8f9f7 95 timeinfo.tm_min = LPC_RTC->TIME[RTC_TIMETYPE_MINUTE];
<> 144:ef7eb2e8f9f7 96 timeinfo.tm_hour = LPC_RTC->TIME[RTC_TIMETYPE_HOUR];
<> 144:ef7eb2e8f9f7 97 timeinfo.tm_mday = LPC_RTC->TIME[RTC_TIMETYPE_DAYOFMONTH];
<> 144:ef7eb2e8f9f7 98 timeinfo.tm_wday = LPC_RTC->TIME[RTC_TIMETYPE_DAYOFWEEK];
<> 144:ef7eb2e8f9f7 99 timeinfo.tm_yday = LPC_RTC->TIME[RTC_TIMETYPE_DAYOFYEAR];
<> 144:ef7eb2e8f9f7 100 timeinfo.tm_mon = LPC_RTC->TIME[RTC_TIMETYPE_MONTH] - 1;
<> 144:ef7eb2e8f9f7 101 timeinfo.tm_year = LPC_RTC->TIME[RTC_TIMETYPE_YEAR] - 1900;
<> 144:ef7eb2e8f9f7 102
<> 144:ef7eb2e8f9f7 103 // Convert to timestamp
<> 144:ef7eb2e8f9f7 104 time_t t = mktime(&timeinfo);
<> 144:ef7eb2e8f9f7 105
<> 144:ef7eb2e8f9f7 106 return t;
<> 144:ef7eb2e8f9f7 107 }
<> 144:ef7eb2e8f9f7 108
<> 144:ef7eb2e8f9f7 109 void rtc_write(time_t t) {
<> 144:ef7eb2e8f9f7 110 // Convert the time in to a tm
<> 144:ef7eb2e8f9f7 111 struct tm *timeinfo = localtime(&t);
<> 144:ef7eb2e8f9f7 112
<> 144:ef7eb2e8f9f7 113 // Pause clock, and clear counter register (clears us count)
<> 144:ef7eb2e8f9f7 114 LPC_RTC->CCR |= 2;
<> 144:ef7eb2e8f9f7 115
<> 144:ef7eb2e8f9f7 116 // Set the RTC
<> 144:ef7eb2e8f9f7 117 LPC_RTC->TIME[RTC_TIMETYPE_SECOND] = timeinfo->tm_sec;
<> 144:ef7eb2e8f9f7 118 LPC_RTC->TIME[RTC_TIMETYPE_MINUTE] = timeinfo->tm_min;
<> 144:ef7eb2e8f9f7 119 LPC_RTC->TIME[RTC_TIMETYPE_HOUR] = timeinfo->tm_hour;
<> 144:ef7eb2e8f9f7 120 LPC_RTC->TIME[RTC_TIMETYPE_DAYOFMONTH] = timeinfo->tm_mday;
<> 144:ef7eb2e8f9f7 121 LPC_RTC->TIME[RTC_TIMETYPE_DAYOFWEEK] = timeinfo->tm_wday;
<> 144:ef7eb2e8f9f7 122 LPC_RTC->TIME[RTC_TIMETYPE_DAYOFYEAR] = timeinfo->tm_yday;
<> 144:ef7eb2e8f9f7 123 LPC_RTC->TIME[RTC_TIMETYPE_MONTH] = timeinfo->tm_mon + 1;
<> 144:ef7eb2e8f9f7 124 LPC_RTC->TIME[RTC_TIMETYPE_YEAR] = timeinfo->tm_year + 1900;
<> 144:ef7eb2e8f9f7 125
<> 144:ef7eb2e8f9f7 126 // Restart clock
<> 144:ef7eb2e8f9f7 127 LPC_RTC->CCR &= ~((uint32_t)2);
<> 144:ef7eb2e8f9f7 128 }