Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.h
- Revision:
- 99:dbbf35b96557
- Parent:
- 90:cb3d968589d8
- Child:
- 106:ba1f97679dad
diff -r 8ab26030e058 -r dbbf35b96557 TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.h
--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.h Wed Apr 29 10:16:23 2015 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.h Wed May 13 08:08:21 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_hal_pwr.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
+ * @version V1.3.0
+ * @date 09-March-2015
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -55,6 +55,11 @@
*/
/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+ * @{
+ */
+
/**
* @brief PWR PVD configuration structure definition
*/
@@ -67,45 +72,25 @@
This parameter can be a value of @ref PWR_PVD_Mode */
}PWR_PVDTypeDef;
-/* Exported constants --------------------------------------------------------*/
-/* ------------- PWR registers bit address in the alias region ---------------*/
-#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
-
-/* --- CR Register ---*/
-/* Alias word address of DBP bit */
-#define CR_OFFSET (PWR_OFFSET + 0x00)
-#define DBP_BitNumber 0x08
-#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
-
-/* Alias word address of PVDE bit */
-#define PVDE_BitNumber 0x04
-#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
-
-/* Alias word address of PMODE bit */
-#define PMODE_BitNumber 0x0E
-#define CR_PMODE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PMODE_BitNumber * 4))
-
-/* --- CSR Register ---*/
-/* Alias word address of EWUP bit */
-#define CSR_OFFSET (PWR_OFFSET + 0x04)
-#define EWUP_BitNumber 0x08
-#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
-
-/** @defgroup PWR_Exported_Constants
- * @{
- */
-
-/** @defgroup PWR_WakeUp_Pins
- * @{
- */
-
-#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP
-#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
/**
* @}
*/
-/** @defgroup PWR_PVD_detection_level
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00000100)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
* @{
*/
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
@@ -115,74 +100,55 @@
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
-#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
-#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
- ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
- ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
- ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
+ (Compare internally to VREFINT) */
/**
* @}
*/
-/** @defgroup PWR_PVD_Mode
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
* @{
*/
-#define PWR_MODE_EVT ((uint32_t)0x00000000) /*!< No Interrupt */
-#define PWR_MODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define PWR_MODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define PWR_MODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
- ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
- */
+ */
-/** @defgroup PWR_Regulator_state_in_STOP_mode
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
* @{
*/
#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
-
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
- ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
/**
* @}
*/
-/** @defgroup PWR_SLEEP_mode_entry
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
* @{
*/
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
/**
* @}
*/
-/** @defgroup PWR_STOP_mode_entry
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
* @{
*/
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
/**
* @}
*/
-/** @defgroup PWR_Regulator_Voltage_Scale
- * @{
- */
-#define PWR_REGULATOR_VOLTAGE_SCALE1 ((uint32_t)0x0000C000)
-#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00008000)
-#define PWR_REGULATOR_VOLTAGE_SCALE3 ((uint32_t)0x00004000)
-#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
- ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
- ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
-/**
- * @}
- */
-
-/** @defgroup PWR_Flag
+/** @defgroup PWR_Flag PWR Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
@@ -190,7 +156,6 @@
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_BRR PWR_CSR_BRR
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
-
/**
* @}
*/
@@ -200,7 +165,28 @@
*/
/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F17xx)
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#else
/** @brief macros configure the main internal regulator output voltage.
* @param __REGULATOR__: specifies the regulator output voltage to achieve
* a tradeoff between performance and power consumption when the device does
@@ -211,7 +197,14 @@
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
* @retval None
*/
-#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) (MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)))
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
/** @brief Check PWR flag is set or not.
* @param __FLAG__: specifies the flag to check.
@@ -244,65 +237,116 @@
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
-#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @brief Enable the PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD EXTI Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
/**
- * @brief Enable the PVD Exti Line.
- * @param __EXTILINE__: specifies the PVD Exti sources to be enabled.
- * This parameter can be:
- * @arg PWR_EXTI_LINE_PVD
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising Trigger.
* @retval None.
*/
-#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
/**
- * @brief Disable the PVD EXTI Line.
- * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
- * This parameter can be:
- * @arg PWR_EXTI_LINE_PVD
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
* @retval None.
*/
-#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief PVD EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
/**
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
- * @param __EXTILINE__: specifies the PVD Exti sources to be cleared.
- * This parameter can be:
- * @arg PWR_EXTI_LINE_PVD
* @retval EXTI PVD Line Status.
*/
-#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__) (EXTI->PR & (__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
/**
* @brief Clear the PVD Exti flag.
- * @param __EXTILINE__: specifies the PVD Exti sources to be cleared.
- * This parameter can be:
- * @arg PWR_EXTI_LINE_PVD
* @retval None.
*/
-#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__) (EXTI->PR = (__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
/**
- * @brief Generates a Software interrupt on selected EXTI line.
- * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
- * This parameter can be:
- * @arg PWR_EXTI_LINE_PVD
+ * @brief Generates a Software interrupt on PVD EXTI line.
* @retval None
*/
-#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @}
+ */
/* Include PWR HAL Extension module */
#include "stm32f4xx_hal_pwr_ex.h"
/* Exported functions --------------------------------------------------------*/
-
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
/* Initialization and de-initialization functions *****************************/
void HAL_PWR_DeInit(void);
void HAL_PWR_EnableBkUpAccess(void);
void HAL_PWR_DisableBkUpAccess(void);
+/**
+ * @}
+ */
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
/* Peripheral Control functions **********************************************/
/* PVD configuration */
-void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
void HAL_PWR_EnablePVD(void);
void HAL_PWR_DisablePVD(void);
@@ -315,9 +359,112 @@
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
void HAL_PWR_EnterSTANDBYMode(void);
+/* Power PVD IRQ Handler */
void HAL_PWR_PVD_IRQHandler(void);
void HAL_PWR_PVDCallback(void);
+/* Cortex System Control functions *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+ * @{
+ */
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+#define PWR_CR_OFFSET 0x00
+#define PWR_CSR_OFFSET 0x04
+#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
+#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CR_register_alias PWR CR Register alias address
+ * @{
+ */
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BIT_NUMBER POSITION_VAL(PWR_CR_PMODE)
+#define CR_PMODE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PMODE_BIT_NUMBER * 4))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define EWUP_BIT_NUMBER POSITION_VAL(PWR_CSR_EWUP)
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (EWUP_BIT_NUMBER * 4))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
/**
* @}