Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F401RE/stm32f401xe.h
- Revision:
- 99:dbbf35b96557
- Parent:
- 90:cb3d968589d8
- Child:
- 106:ba1f97679dad
diff -r 8ab26030e058 -r dbbf35b96557 TARGET_NUCLEO_F401RE/stm32f401xe.h
--- a/TARGET_NUCLEO_F401RE/stm32f401xe.h Wed Apr 29 10:16:23 2015 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f401xe.h Wed May 13 08:08:21 2015 +0200
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f401xe.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 19-June-2014
+ * @version V2.3.0
+ * @date 02-March-2015
* @brief CMSIS STM32F401xExx Device Peripheral Access Layer Header File.
*
* This file contains:
@@ -14,7 +14,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -290,8 +290,7 @@
__IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
__IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
__IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
- __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
- __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
__IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
__IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
} GPIO_TypeDef;
@@ -1423,6 +1422,9 @@
#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
/******************* Bit definition for EXTI_EMR register *******************/
#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
@@ -1445,6 +1447,9 @@
#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
/****************** Bit definition for EXTI_RTSR register *******************/
#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
@@ -1467,6 +1472,9 @@
#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
/****************** Bit definition for EXTI_FTSR register *******************/
#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
@@ -1489,6 +1497,9 @@
#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
/****************** Bit definition for EXTI_SWIER register ******************/
#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
@@ -1511,6 +1522,9 @@
#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
/******************* Bit definition for EXTI_PR register ********************/
#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
@@ -1533,6 +1547,9 @@
#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit for line 22 */
/******************************************************************************/
/* */
@@ -4511,14 +4528,14 @@
((INSTANCE) == I2C3))
/******************************** I2S Instances *******************************/
-#define IS_I2S_INSTANCE(INSTANCE) (((INSTANCE) == SPI2) || \
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI2) || \
((INSTANCE) == SPI3))
/*************************** I2S Extended Instances ***************************/
-#define IS_I2S_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
- ((INSTANCE) == SPI3) || \
- ((INSTANCE) == I2S2ext) || \
- ((INSTANCE) == I2S3ext))
+#define IS_I2S_ALL_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
/****************************** RTC Instances *********************************/
#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
@@ -4728,6 +4745,14 @@
/****************************** WWDG Instances ********************************/
#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+/****************************** SDIO Instances ********************************/
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/****************************** USB Exported Constants ************************/
+#define USB_OTG_FS_HOST_MAX_CHANNEL_NBR 8
+#define USB_OTG_FS_MAX_IN_ENDPOINTS 4 /* Including EP0 */
+#define USB_OTG_FS_MAX_OUT_ENDPOINTS 4 /* Including EP0 */
+#define USB_OTG_FS_TOTAL_FIFO_SIZE 1280 /* in Bytes */
/**
* @}