Ricardo Benitez / mbed

meh

Fork of mbed by mbed official

TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio.h@99:dbbf35b96557, 2015-05-13 (annotated)

Committer:
Kojto
Date:
Wed May 13 08:08:21 2015 +0200
Revision:
99:dbbf35b96557
Parent:
90:cb3d968589d8
Child:
106:ba1f97679dad
Release 99 of the mbed library



Changes:

 - new targets - MAXWSNENV, DISCO_L053C8

 - STM32F4xx - ST Cube driver

 - KSDK mcu - SPI timing fix

 - Nordic - update to softdevice s130

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 77:869cf507173a 1 /**
emilmont 77:869cf507173a 2 ******************************************************************************
emilmont 77:869cf507173a 3 * @file stm32f4xx_hal_gpio.h
emilmont 77:869cf507173a 4 * @author MCD Application Team
Kojto 99:dbbf35b96557 5 * @version V1.3.0
Kojto 99:dbbf35b96557 6 * @date 09-March-2015
emilmont 77:869cf507173a 7 * @brief Header file of GPIO HAL module.
emilmont 77:869cf507173a 8 ******************************************************************************
emilmont 77:869cf507173a 9 * @attention
emilmont 77:869cf507173a 10 *
Kojto 99:dbbf35b96557 11 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
emilmont 77:869cf507173a 12 *
emilmont 77:869cf507173a 13 * Redistribution and use in source and binary forms, with or without modification,
emilmont 77:869cf507173a 14 * are permitted provided that the following conditions are met:
emilmont 77:869cf507173a 15 * 1. Redistributions of source code must retain the above copyright notice,
emilmont 77:869cf507173a 16 * this list of conditions and the following disclaimer.
emilmont 77:869cf507173a 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
emilmont 77:869cf507173a 18 * this list of conditions and the following disclaimer in the documentation
emilmont 77:869cf507173a 19 * and/or other materials provided with the distribution.
emilmont 77:869cf507173a 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
emilmont 77:869cf507173a 21 * may be used to endorse or promote products derived from this software
emilmont 77:869cf507173a 22 * without specific prior written permission.
emilmont 77:869cf507173a 23 *
emilmont 77:869cf507173a 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
emilmont 77:869cf507173a 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
emilmont 77:869cf507173a 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
emilmont 77:869cf507173a 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
emilmont 77:869cf507173a 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
emilmont 77:869cf507173a 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
emilmont 77:869cf507173a 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
emilmont 77:869cf507173a 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
emilmont 77:869cf507173a 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
emilmont 77:869cf507173a 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
emilmont 77:869cf507173a 34 *
emilmont 77:869cf507173a 35 ******************************************************************************
emilmont 77:869cf507173a 36 */
emilmont 77:869cf507173a 37
emilmont 77:869cf507173a 38 /* Define to prevent recursive inclusion -------------------------------------*/
emilmont 77:869cf507173a 39 #ifndef __STM32F4xx_HAL_GPIO_H
emilmont 77:869cf507173a 40 #define __STM32F4xx_HAL_GPIO_H
emilmont 77:869cf507173a 41
emilmont 77:869cf507173a 42 #ifdef __cplusplus
emilmont 77:869cf507173a 43 extern "C" {
emilmont 77:869cf507173a 44 #endif
emilmont 77:869cf507173a 45
emilmont 77:869cf507173a 46 /* Includes ------------------------------------------------------------------*/
emilmont 77:869cf507173a 47 #include "stm32f4xx_hal_def.h"
emilmont 77:869cf507173a 48
emilmont 77:869cf507173a 49 /** @addtogroup STM32F4xx_HAL_Driver
emilmont 77:869cf507173a 50 * @{
emilmont 77:869cf507173a 51 */
emilmont 77:869cf507173a 52
emilmont 77:869cf507173a 53 /** @addtogroup GPIO
emilmont 77:869cf507173a 54 * @{
emilmont 77:869cf507173a 55 */
emilmont 77:869cf507173a 56
emilmont 77:869cf507173a 57 /* Exported types ------------------------------------------------------------*/
Kojto 99:dbbf35b96557 58 /** @defgroup GPIO_Exported_Types GPIO Exported Types
Kojto 99:dbbf35b96557 59 * @{
Kojto 99:dbbf35b96557 60 */
emilmont 77:869cf507173a 61
emilmont 77:869cf507173a 62 /**
Kojto 99:dbbf35b96557 63 * @brief GPIO Init structure definition
emilmont 77:869cf507173a 64 */
emilmont 77:869cf507173a 65 typedef struct
emilmont 77:869cf507173a 66 {
emilmont 77:869cf507173a 67 uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
emilmont 77:869cf507173a 68 This parameter can be any value of @ref GPIO_pins_define */
emilmont 77:869cf507173a 69
emilmont 77:869cf507173a 70 uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
emilmont 77:869cf507173a 71 This parameter can be a value of @ref GPIO_mode_define */
emilmont 77:869cf507173a 72
emilmont 77:869cf507173a 73 uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
emilmont 77:869cf507173a 74 This parameter can be a value of @ref GPIO_pull_define */
emilmont 77:869cf507173a 75
emilmont 77:869cf507173a 76 uint32_t Speed; /*!< Specifies the speed for the selected pins.
emilmont 77:869cf507173a 77 This parameter can be a value of @ref GPIO_speed_define */
emilmont 77:869cf507173a 78
bogdanm 85:024bf7f99721 79 uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
Kojto 99:dbbf35b96557 80 This parameter can be a value of @ref GPIO_Alternate_function_selection */
emilmont 77:869cf507173a 81 }GPIO_InitTypeDef;
emilmont 77:869cf507173a 82
emilmont 77:869cf507173a 83 /**
emilmont 77:869cf507173a 84 * @brief GPIO Bit SET and Bit RESET enumeration
emilmont 77:869cf507173a 85 */
emilmont 77:869cf507173a 86 typedef enum
emilmont 77:869cf507173a 87 {
emilmont 77:869cf507173a 88 GPIO_PIN_RESET = 0,
emilmont 77:869cf507173a 89 GPIO_PIN_SET
emilmont 77:869cf507173a 90 }GPIO_PinState;
Kojto 99:dbbf35b96557 91 /**
Kojto 99:dbbf35b96557 92 * @}
Kojto 99:dbbf35b96557 93 */
emilmont 77:869cf507173a 94
emilmont 77:869cf507173a 95 /* Exported constants --------------------------------------------------------*/
emilmont 77:869cf507173a 96
Kojto 99:dbbf35b96557 97 /** @defgroup GPIO_Exported_Constants GPIO Exported Constants
emilmont 77:869cf507173a 98 * @{
Kojto 99:dbbf35b96557 99 */
emilmont 77:869cf507173a 100
Kojto 99:dbbf35b96557 101 /** @defgroup GPIO_pins_define GPIO pins define
emilmont 77:869cf507173a 102 * @{
emilmont 77:869cf507173a 103 */
emilmont 77:869cf507173a 104 #define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
emilmont 77:869cf507173a 105 #define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
emilmont 77:869cf507173a 106 #define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
emilmont 77:869cf507173a 107 #define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
emilmont 77:869cf507173a 108 #define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
emilmont 77:869cf507173a 109 #define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
emilmont 77:869cf507173a 110 #define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
emilmont 77:869cf507173a 111 #define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
emilmont 77:869cf507173a 112 #define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
emilmont 77:869cf507173a 113 #define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
emilmont 77:869cf507173a 114 #define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
emilmont 77:869cf507173a 115 #define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
emilmont 77:869cf507173a 116 #define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
emilmont 77:869cf507173a 117 #define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
emilmont 77:869cf507173a 118 #define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
emilmont 77:869cf507173a 119 #define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
emilmont 77:869cf507173a 120 #define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
emilmont 77:869cf507173a 121
Kojto 90:cb3d968589d8 122 #define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
emilmont 77:869cf507173a 123 /**
emilmont 77:869cf507173a 124 * @}
emilmont 77:869cf507173a 125 */
emilmont 77:869cf507173a 126
Kojto 99:dbbf35b96557 127 /** @defgroup GPIO_mode_define GPIO mode define
emilmont 77:869cf507173a 128 * @brief GPIO Configuration Mode
emilmont 77:869cf507173a 129 * Elements values convention: 0xX0yz00YZ
emilmont 77:869cf507173a 130 * - X : GPIO mode or EXTI Mode
emilmont 77:869cf507173a 131 * - y : External IT or Event trigger detection
emilmont 77:869cf507173a 132 * - z : IO configuration on External IT or Event
emilmont 77:869cf507173a 133 * - Y : Output type (Push Pull or Open Drain)
emilmont 77:869cf507173a 134 * - Z : IO Direction mode (Input, Output, Alternate or Analog)
emilmont 77:869cf507173a 135 * @{
emilmont 77:869cf507173a 136 */
emilmont 77:869cf507173a 137 #define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
emilmont 77:869cf507173a 138 #define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
emilmont 77:869cf507173a 139 #define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
emilmont 77:869cf507173a 140 #define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
emilmont 77:869cf507173a 141 #define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
emilmont 77:869cf507173a 142
emilmont 77:869cf507173a 143 #define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
emilmont 77:869cf507173a 144
emilmont 77:869cf507173a 145 #define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
emilmont 77:869cf507173a 146 #define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
emilmont 77:869cf507173a 147 #define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
emilmont 77:869cf507173a 148
emilmont 77:869cf507173a 149 #define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
emilmont 77:869cf507173a 150 #define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
emilmont 77:869cf507173a 151 #define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
emilmont 77:869cf507173a 152 /**
emilmont 77:869cf507173a 153 * @}
emilmont 77:869cf507173a 154 */
Kojto 99:dbbf35b96557 155
Kojto 99:dbbf35b96557 156 /** @defgroup GPIO_speed_define GPIO speed define
emilmont 77:869cf507173a 157 * @brief GPIO Output Maximum frequency
emilmont 77:869cf507173a 158 * @{
emilmont 77:869cf507173a 159 */
emilmont 77:869cf507173a 160 #define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
emilmont 77:869cf507173a 161 #define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
emilmont 77:869cf507173a 162 #define GPIO_SPEED_FAST ((uint32_t)0x00000002) /*!< Fast speed */
emilmont 77:869cf507173a 163 #define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
emilmont 77:869cf507173a 164 /**
emilmont 77:869cf507173a 165 * @}
emilmont 77:869cf507173a 166 */
emilmont 77:869cf507173a 167
Kojto 99:dbbf35b96557 168 /** @defgroup GPIO_pull_define GPIO pull define
emilmont 77:869cf507173a 169 * @brief GPIO Pull-Up or Pull-Down Activation
emilmont 77:869cf507173a 170 * @{
emilmont 77:869cf507173a 171 */
emilmont 77:869cf507173a 172 #define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
emilmont 77:869cf507173a 173 #define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
emilmont 77:869cf507173a 174 #define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
emilmont 77:869cf507173a 175 /**
emilmont 77:869cf507173a 176 * @}
emilmont 77:869cf507173a 177 */
emilmont 77:869cf507173a 178
emilmont 77:869cf507173a 179 /**
emilmont 77:869cf507173a 180 * @}
emilmont 77:869cf507173a 181 */
emilmont 77:869cf507173a 182
emilmont 77:869cf507173a 183 /* Exported macro ------------------------------------------------------------*/
Kojto 99:dbbf35b96557 184 /** @defgroup GPIO_Exported_Macros GPIO Exported Macros
Kojto 99:dbbf35b96557 185 * @{
Kojto 99:dbbf35b96557 186 */
emilmont 77:869cf507173a 187
emilmont 77:869cf507173a 188 /**
emilmont 77:869cf507173a 189 * @brief Checks whether the specified EXTI line flag is set or not.
emilmont 77:869cf507173a 190 * @param __EXTI_LINE__: specifies the EXTI line flag to check.
bogdanm 85:024bf7f99721 191 * This parameter can be GPIO_PIN_x where x can be(0..15)
emilmont 77:869cf507173a 192 * @retval The new state of __EXTI_LINE__ (SET or RESET).
emilmont 77:869cf507173a 193 */
emilmont 77:869cf507173a 194 #define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
emilmont 77:869cf507173a 195
emilmont 77:869cf507173a 196 /**
emilmont 77:869cf507173a 197 * @brief Clears the EXTI's line pending flags.
emilmont 77:869cf507173a 198 * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
bogdanm 85:024bf7f99721 199 * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
emilmont 77:869cf507173a 200 * @retval None
emilmont 77:869cf507173a 201 */
emilmont 77:869cf507173a 202 #define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
emilmont 77:869cf507173a 203
emilmont 77:869cf507173a 204 /**
emilmont 77:869cf507173a 205 * @brief Checks whether the specified EXTI line is asserted or not.
emilmont 77:869cf507173a 206 * @param __EXTI_LINE__: specifies the EXTI line to check.
bogdanm 85:024bf7f99721 207 * This parameter can be GPIO_PIN_x where x can be(0..15)
emilmont 77:869cf507173a 208 * @retval The new state of __EXTI_LINE__ (SET or RESET).
emilmont 77:869cf507173a 209 */
emilmont 77:869cf507173a 210 #define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
emilmont 77:869cf507173a 211
emilmont 77:869cf507173a 212 /**
emilmont 77:869cf507173a 213 * @brief Clears the EXTI's line pending bits.
emilmont 77:869cf507173a 214 * @param __EXTI_LINE__: specifies the EXTI lines to clear.
bogdanm 85:024bf7f99721 215 * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
emilmont 77:869cf507173a 216 * @retval None
emilmont 77:869cf507173a 217 */
emilmont 77:869cf507173a 218 #define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
emilmont 77:869cf507173a 219
Kojto 90:cb3d968589d8 220 /**
Kojto 90:cb3d968589d8 221 * @brief Generates a Software interrupt on selected EXTI line.
Kojto 90:cb3d968589d8 222 * @param __EXTI_LINE__: specifies the EXTI line to check.
Kojto 90:cb3d968589d8 223 * This parameter can be GPIO_PIN_x where x can be(0..15)
Kojto 90:cb3d968589d8 224 * @retval None
Kojto 90:cb3d968589d8 225 */
Kojto 90:cb3d968589d8 226 #define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
Kojto 99:dbbf35b96557 227 /**
Kojto 99:dbbf35b96557 228 * @}
Kojto 99:dbbf35b96557 229 */
Kojto 90:cb3d968589d8 230
emilmont 77:869cf507173a 231 /* Include GPIO HAL Extension module */
emilmont 77:869cf507173a 232 #include "stm32f4xx_hal_gpio_ex.h"
emilmont 77:869cf507173a 233
Kojto 99:dbbf35b96557 234 /* Exported functions --------------------------------------------------------*/
Kojto 99:dbbf35b96557 235 /** @addtogroup GPIO_Exported_Functions
Kojto 99:dbbf35b96557 236 * @{
Kojto 99:dbbf35b96557 237 */
Kojto 99:dbbf35b96557 238
Kojto 99:dbbf35b96557 239 /** @addtogroup GPIO_Exported_Functions_Group1
Kojto 99:dbbf35b96557 240 * @{
Kojto 99:dbbf35b96557 241 */
Kojto 99:dbbf35b96557 242 /* Initialization and de-initialization functions *****************************/
emilmont 77:869cf507173a 243 void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
emilmont 77:869cf507173a 244 void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
Kojto 99:dbbf35b96557 245 /**
Kojto 99:dbbf35b96557 246 * @}
Kojto 99:dbbf35b96557 247 */
emilmont 77:869cf507173a 248
Kojto 99:dbbf35b96557 249 /** @addtogroup GPIO_Exported_Functions_Group2
Kojto 99:dbbf35b96557 250 * @{
Kojto 99:dbbf35b96557 251 */
Kojto 99:dbbf35b96557 252 /* IO operation functions *****************************************************/
emilmont 77:869cf507173a 253 GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
bogdanm 85:024bf7f99721 254 void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
bogdanm 85:024bf7f99721 255 void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
bogdanm 85:024bf7f99721 256 HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
bogdanm 85:024bf7f99721 257 void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
bogdanm 85:024bf7f99721 258 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
emilmont 77:869cf507173a 259
emilmont 77:869cf507173a 260 /**
emilmont 77:869cf507173a 261 * @}
emilmont 77:869cf507173a 262 */
emilmont 77:869cf507173a 263
emilmont 77:869cf507173a 264 /**
emilmont 77:869cf507173a 265 * @}
emilmont 77:869cf507173a 266 */
Kojto 99:dbbf35b96557 267 /* Private types -------------------------------------------------------------*/
Kojto 99:dbbf35b96557 268 /* Private variables ---------------------------------------------------------*/
Kojto 99:dbbf35b96557 269 /* Private constants ---------------------------------------------------------*/
Kojto 99:dbbf35b96557 270 /** @defgroup GPIO_Private_Constants GPIO Private Constants
Kojto 99:dbbf35b96557 271 * @{
Kojto 99:dbbf35b96557 272 */
Kojto 99:dbbf35b96557 273
Kojto 99:dbbf35b96557 274 /**
Kojto 99:dbbf35b96557 275 * @}
Kojto 99:dbbf35b96557 276 */
Kojto 99:dbbf35b96557 277
Kojto 99:dbbf35b96557 278 /* Private macros ------------------------------------------------------------*/
Kojto 99:dbbf35b96557 279 /** @defgroup GPIO_Private_Macros GPIO Private Macros
Kojto 99:dbbf35b96557 280 * @{
Kojto 99:dbbf35b96557 281 */
Kojto 99:dbbf35b96557 282 #define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
Kojto 99:dbbf35b96557 283 #define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
Kojto 99:dbbf35b96557 284 #define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
Kojto 99:dbbf35b96557 285 ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
Kojto 99:dbbf35b96557 286 ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
Kojto 99:dbbf35b96557 287 ((MODE) == GPIO_MODE_AF_PP) ||\
Kojto 99:dbbf35b96557 288 ((MODE) == GPIO_MODE_AF_OD) ||\
Kojto 99:dbbf35b96557 289 ((MODE) == GPIO_MODE_IT_RISING) ||\
Kojto 99:dbbf35b96557 290 ((MODE) == GPIO_MODE_IT_FALLING) ||\
Kojto 99:dbbf35b96557 291 ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
Kojto 99:dbbf35b96557 292 ((MODE) == GPIO_MODE_EVT_RISING) ||\
Kojto 99:dbbf35b96557 293 ((MODE) == GPIO_MODE_EVT_FALLING) ||\
Kojto 99:dbbf35b96557 294 ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
Kojto 99:dbbf35b96557 295 ((MODE) == GPIO_MODE_ANALOG))
Kojto 99:dbbf35b96557 296 #define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
Kojto 99:dbbf35b96557 297 ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
Kojto 99:dbbf35b96557 298 #define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
Kojto 99:dbbf35b96557 299 ((PULL) == GPIO_PULLDOWN))
Kojto 99:dbbf35b96557 300 /**
Kojto 99:dbbf35b96557 301 * @}
Kojto 99:dbbf35b96557 302 */
Kojto 99:dbbf35b96557 303
Kojto 99:dbbf35b96557 304 /* Private functions ---------------------------------------------------------*/
Kojto 99:dbbf35b96557 305 /** @defgroup GPIO_Private_Functions GPIO Private Functions
Kojto 99:dbbf35b96557 306 * @{
Kojto 99:dbbf35b96557 307 */
Kojto 99:dbbf35b96557 308
Kojto 99:dbbf35b96557 309 /**
Kojto 99:dbbf35b96557 310 * @}
Kojto 99:dbbf35b96557 311 */
Kojto 99:dbbf35b96557 312
Kojto 99:dbbf35b96557 313 /**
Kojto 99:dbbf35b96557 314 * @}
Kojto 99:dbbf35b96557 315 */
Kojto 99:dbbf35b96557 316
Kojto 99:dbbf35b96557 317 /**
Kojto 99:dbbf35b96557 318 * @}
Kojto 99:dbbf35b96557 319 */
emilmont 77:869cf507173a 320
emilmont 77:869cf507173a 321 #ifdef __cplusplus
emilmont 77:869cf507173a 322 }
emilmont 77:869cf507173a 323 #endif
emilmont 77:869cf507173a 324
emilmont 77:869cf507173a 325 #endif /* __STM32F4xx_HAL_GPIO_H */
emilmont 77:869cf507173a 326
emilmont 77:869cf507173a 327 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/