Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F401RE/stm32f4xx_hal_uart.h@90:cb3d968589d8, 2014-10-28 (annotated)
- Committer:
- Kojto
- Date:
- Tue Oct 28 16:40:41 2014 +0000
- Revision:
- 90:cb3d968589d8
- Parent:
- 85:024bf7f99721
- Child:
- 99:dbbf35b96557
Release 90 of the mbed library
Changes:
- Freescale KSDK update (v1.0)
- K22 - new target addition
- KL43Z - new target addition
- Nucleo F091RC - new target addition
- Nucleo L152RE - STM32Cube driver
- Nordic - Softdevice v7.1.0
- Nvic files - BSD License
- LPC824 - various HAL fixes
- Nucleo F411RE - CMSIS - IAR files
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| emilmont | 77:869cf507173a | 1 | /** |
| emilmont | 77:869cf507173a | 2 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 3 | * @file stm32f4xx_hal_uart.h |
| emilmont | 77:869cf507173a | 4 | * @author MCD Application Team |
| Kojto | 90:cb3d968589d8 | 5 | * @version V1.1.0 |
| Kojto | 90:cb3d968589d8 | 6 | * @date 19-June-2014 |
| emilmont | 77:869cf507173a | 7 | * @brief Header file of UART HAL module. |
| emilmont | 77:869cf507173a | 8 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 9 | * @attention |
| emilmont | 77:869cf507173a | 10 | * |
| emilmont | 77:869cf507173a | 11 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
| emilmont | 77:869cf507173a | 12 | * |
| emilmont | 77:869cf507173a | 13 | * Redistribution and use in source and binary forms, with or without modification, |
| emilmont | 77:869cf507173a | 14 | * are permitted provided that the following conditions are met: |
| emilmont | 77:869cf507173a | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
| emilmont | 77:869cf507173a | 16 | * this list of conditions and the following disclaimer. |
| emilmont | 77:869cf507173a | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| emilmont | 77:869cf507173a | 18 | * this list of conditions and the following disclaimer in the documentation |
| emilmont | 77:869cf507173a | 19 | * and/or other materials provided with the distribution. |
| emilmont | 77:869cf507173a | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| emilmont | 77:869cf507173a | 21 | * may be used to endorse or promote products derived from this software |
| emilmont | 77:869cf507173a | 22 | * without specific prior written permission. |
| emilmont | 77:869cf507173a | 23 | * |
| emilmont | 77:869cf507173a | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| emilmont | 77:869cf507173a | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| emilmont | 77:869cf507173a | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| emilmont | 77:869cf507173a | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| emilmont | 77:869cf507173a | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| emilmont | 77:869cf507173a | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| emilmont | 77:869cf507173a | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| emilmont | 77:869cf507173a | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| emilmont | 77:869cf507173a | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| emilmont | 77:869cf507173a | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| emilmont | 77:869cf507173a | 34 | * |
| emilmont | 77:869cf507173a | 35 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 36 | */ |
| emilmont | 77:869cf507173a | 37 | |
| emilmont | 77:869cf507173a | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| emilmont | 77:869cf507173a | 39 | #ifndef __STM32F4xx_HAL_UART_H |
| emilmont | 77:869cf507173a | 40 | #define __STM32F4xx_HAL_UART_H |
| emilmont | 77:869cf507173a | 41 | |
| emilmont | 77:869cf507173a | 42 | #ifdef __cplusplus |
| emilmont | 77:869cf507173a | 43 | extern "C" { |
| emilmont | 77:869cf507173a | 44 | #endif |
| emilmont | 77:869cf507173a | 45 | |
| emilmont | 77:869cf507173a | 46 | /* Includes ------------------------------------------------------------------*/ |
| emilmont | 77:869cf507173a | 47 | #include "stm32f4xx_hal_def.h" |
| emilmont | 77:869cf507173a | 48 | |
| emilmont | 77:869cf507173a | 49 | /** @addtogroup STM32F4xx_HAL_Driver |
| emilmont | 77:869cf507173a | 50 | * @{ |
| emilmont | 77:869cf507173a | 51 | */ |
| emilmont | 77:869cf507173a | 52 | |
| emilmont | 77:869cf507173a | 53 | /** @addtogroup UART |
| emilmont | 77:869cf507173a | 54 | * @{ |
| emilmont | 77:869cf507173a | 55 | */ |
| emilmont | 77:869cf507173a | 56 | |
| emilmont | 77:869cf507173a | 57 | /* Exported types ------------------------------------------------------------*/ |
| emilmont | 77:869cf507173a | 58 | |
| emilmont | 77:869cf507173a | 59 | /** |
| emilmont | 77:869cf507173a | 60 | * @brief UART Init Structure definition |
| emilmont | 77:869cf507173a | 61 | */ |
| emilmont | 77:869cf507173a | 62 | typedef struct |
| emilmont | 77:869cf507173a | 63 | { |
| emilmont | 77:869cf507173a | 64 | uint32_t BaudRate; /*!< This member configures the UART communication baud rate. |
| emilmont | 77:869cf507173a | 65 | The baud rate is computed using the following formula: |
| emilmont | 77:869cf507173a | 66 | - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) |
| emilmont | 77:869cf507173a | 67 | - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 |
| emilmont | 77:869cf507173a | 68 | Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ |
| emilmont | 77:869cf507173a | 69 | |
| emilmont | 77:869cf507173a | 70 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
| emilmont | 77:869cf507173a | 71 | This parameter can be a value of @ref UART_Word_Length */ |
| emilmont | 77:869cf507173a | 72 | |
| emilmont | 77:869cf507173a | 73 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. |
| emilmont | 77:869cf507173a | 74 | This parameter can be a value of @ref UART_Stop_Bits */ |
| emilmont | 77:869cf507173a | 75 | |
| emilmont | 77:869cf507173a | 76 | uint32_t Parity; /*!< Specifies the parity mode. |
| emilmont | 77:869cf507173a | 77 | This parameter can be a value of @ref UART_Parity |
| emilmont | 77:869cf507173a | 78 | @note When parity is enabled, the computed parity is inserted |
| emilmont | 77:869cf507173a | 79 | at the MSB position of the transmitted data (9th bit when |
| emilmont | 77:869cf507173a | 80 | the word length is set to 9 data bits; 8th bit when the |
| emilmont | 77:869cf507173a | 81 | word length is set to 8 data bits). */ |
| emilmont | 77:869cf507173a | 82 | |
| emilmont | 77:869cf507173a | 83 | uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. |
| emilmont | 77:869cf507173a | 84 | This parameter can be a value of @ref UART_Mode */ |
| emilmont | 77:869cf507173a | 85 | |
| emilmont | 77:869cf507173a | 86 | uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled |
| emilmont | 77:869cf507173a | 87 | or disabled. |
| emilmont | 77:869cf507173a | 88 | This parameter can be a value of @ref UART_Hardware_Flow_Control */ |
| emilmont | 77:869cf507173a | 89 | |
| emilmont | 77:869cf507173a | 90 | uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). |
| emilmont | 77:869cf507173a | 91 | This parameter can be a value of @ref UART_Over_Sampling */ |
| emilmont | 77:869cf507173a | 92 | }UART_InitTypeDef; |
| emilmont | 77:869cf507173a | 93 | |
| emilmont | 77:869cf507173a | 94 | /** |
| emilmont | 77:869cf507173a | 95 | * @brief HAL UART State structures definition |
| emilmont | 77:869cf507173a | 96 | */ |
| emilmont | 77:869cf507173a | 97 | typedef enum |
| emilmont | 77:869cf507173a | 98 | { |
| emilmont | 77:869cf507173a | 99 | HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ |
| emilmont | 77:869cf507173a | 100 | HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| emilmont | 77:869cf507173a | 101 | HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
| emilmont | 77:869cf507173a | 102 | HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| emilmont | 77:869cf507173a | 103 | HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| emilmont | 77:869cf507173a | 104 | HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
| emilmont | 77:869cf507173a | 105 | HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| emilmont | 77:869cf507173a | 106 | HAL_UART_STATE_ERROR = 0x04 /*!< Error */ |
| emilmont | 77:869cf507173a | 107 | }HAL_UART_StateTypeDef; |
| emilmont | 77:869cf507173a | 108 | |
| emilmont | 77:869cf507173a | 109 | /** |
| emilmont | 77:869cf507173a | 110 | * @brief HAL UART Error Code structure definition |
| emilmont | 77:869cf507173a | 111 | */ |
| emilmont | 77:869cf507173a | 112 | typedef enum |
| emilmont | 77:869cf507173a | 113 | { |
| emilmont | 77:869cf507173a | 114 | HAL_UART_ERROR_NONE = 0x00, /*!< No error */ |
| emilmont | 77:869cf507173a | 115 | HAL_UART_ERROR_PE = 0x01, /*!< Parity error */ |
| emilmont | 77:869cf507173a | 116 | HAL_UART_ERROR_NE = 0x02, /*!< Noise error */ |
| emilmont | 77:869cf507173a | 117 | HAL_UART_ERROR_FE = 0x04, /*!< frame error */ |
| emilmont | 77:869cf507173a | 118 | HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */ |
| emilmont | 77:869cf507173a | 119 | HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */ |
| emilmont | 77:869cf507173a | 120 | }HAL_UART_ErrorTypeDef; |
| emilmont | 77:869cf507173a | 121 | |
| emilmont | 77:869cf507173a | 122 | /** |
| emilmont | 77:869cf507173a | 123 | * @brief UART handle Structure definition |
| emilmont | 77:869cf507173a | 124 | */ |
| emilmont | 77:869cf507173a | 125 | typedef struct |
| emilmont | 77:869cf507173a | 126 | { |
| emilmont | 77:869cf507173a | 127 | USART_TypeDef *Instance; /* UART registers base address */ |
| emilmont | 77:869cf507173a | 128 | |
| emilmont | 77:869cf507173a | 129 | UART_InitTypeDef Init; /* UART communication parameters */ |
| emilmont | 77:869cf507173a | 130 | |
| emilmont | 77:869cf507173a | 131 | uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */ |
| emilmont | 77:869cf507173a | 132 | |
| emilmont | 77:869cf507173a | 133 | uint16_t TxXferSize; /* UART Tx Transfer size */ |
| emilmont | 77:869cf507173a | 134 | |
| emilmont | 77:869cf507173a | 135 | uint16_t TxXferCount; /* UART Tx Transfer Counter */ |
| emilmont | 77:869cf507173a | 136 | |
| emilmont | 77:869cf507173a | 137 | uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */ |
| emilmont | 77:869cf507173a | 138 | |
| emilmont | 77:869cf507173a | 139 | uint16_t RxXferSize; /* UART Rx Transfer size */ |
| emilmont | 77:869cf507173a | 140 | |
| emilmont | 77:869cf507173a | 141 | uint16_t RxXferCount; /* UART Rx Transfer Counter */ |
| emilmont | 77:869cf507173a | 142 | |
| emilmont | 77:869cf507173a | 143 | DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */ |
| emilmont | 77:869cf507173a | 144 | |
| emilmont | 77:869cf507173a | 145 | DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */ |
| emilmont | 77:869cf507173a | 146 | |
| emilmont | 77:869cf507173a | 147 | HAL_LockTypeDef Lock; /* Locking object */ |
| emilmont | 77:869cf507173a | 148 | |
| emilmont | 77:869cf507173a | 149 | __IO HAL_UART_StateTypeDef State; /* UART communication state */ |
| emilmont | 77:869cf507173a | 150 | |
| emilmont | 77:869cf507173a | 151 | __IO HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */ |
| emilmont | 77:869cf507173a | 152 | |
| emilmont | 77:869cf507173a | 153 | }UART_HandleTypeDef; |
| emilmont | 77:869cf507173a | 154 | |
| emilmont | 77:869cf507173a | 155 | /* Exported constants --------------------------------------------------------*/ |
| emilmont | 77:869cf507173a | 156 | /** @defgroup UART_Exported_Constants |
| emilmont | 77:869cf507173a | 157 | * @{ |
| emilmont | 77:869cf507173a | 158 | */ |
| emilmont | 77:869cf507173a | 159 | |
| emilmont | 77:869cf507173a | 160 | /** @defgroup UART_Word_Length |
| emilmont | 77:869cf507173a | 161 | * @{ |
| emilmont | 77:869cf507173a | 162 | */ |
| emilmont | 77:869cf507173a | 163 | #define UART_WORDLENGTH_8B ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 164 | #define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
| emilmont | 77:869cf507173a | 165 | #define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ |
| emilmont | 77:869cf507173a | 166 | ((LENGTH) == UART_WORDLENGTH_9B)) |
| emilmont | 77:869cf507173a | 167 | /** |
| emilmont | 77:869cf507173a | 168 | * @} |
| emilmont | 77:869cf507173a | 169 | */ |
| emilmont | 77:869cf507173a | 170 | |
| emilmont | 77:869cf507173a | 171 | /** @defgroup UART_Stop_Bits |
| emilmont | 77:869cf507173a | 172 | * @{ |
| emilmont | 77:869cf507173a | 173 | */ |
| emilmont | 77:869cf507173a | 174 | #define UART_STOPBITS_1 ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 175 | #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) |
| emilmont | 77:869cf507173a | 176 | #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ |
| emilmont | 77:869cf507173a | 177 | ((STOPBITS) == UART_STOPBITS_2)) |
| emilmont | 77:869cf507173a | 178 | /** |
| emilmont | 77:869cf507173a | 179 | * @} |
| emilmont | 77:869cf507173a | 180 | */ |
| emilmont | 77:869cf507173a | 181 | |
| emilmont | 77:869cf507173a | 182 | /** @defgroup UART_Parity |
| emilmont | 77:869cf507173a | 183 | * @{ |
| emilmont | 77:869cf507173a | 184 | */ |
| emilmont | 77:869cf507173a | 185 | #define UART_PARITY_NONE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 186 | #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| emilmont | 77:869cf507173a | 187 | #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| emilmont | 77:869cf507173a | 188 | #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ |
| emilmont | 77:869cf507173a | 189 | ((PARITY) == UART_PARITY_EVEN) || \ |
| emilmont | 77:869cf507173a | 190 | ((PARITY) == UART_PARITY_ODD)) |
| emilmont | 77:869cf507173a | 191 | /** |
| emilmont | 77:869cf507173a | 192 | * @} |
| emilmont | 77:869cf507173a | 193 | */ |
| emilmont | 77:869cf507173a | 194 | |
| emilmont | 77:869cf507173a | 195 | /** @defgroup UART_Hardware_Flow_Control |
| emilmont | 77:869cf507173a | 196 | * @{ |
| emilmont | 77:869cf507173a | 197 | */ |
| emilmont | 77:869cf507173a | 198 | #define UART_HWCONTROL_NONE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 199 | #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) |
| emilmont | 77:869cf507173a | 200 | #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) |
| emilmont | 77:869cf507173a | 201 | #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) |
| emilmont | 77:869cf507173a | 202 | #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ |
| emilmont | 77:869cf507173a | 203 | (((CONTROL) == UART_HWCONTROL_NONE) || \ |
| emilmont | 77:869cf507173a | 204 | ((CONTROL) == UART_HWCONTROL_RTS) || \ |
| emilmont | 77:869cf507173a | 205 | ((CONTROL) == UART_HWCONTROL_CTS) || \ |
| emilmont | 77:869cf507173a | 206 | ((CONTROL) == UART_HWCONTROL_RTS_CTS)) |
| emilmont | 77:869cf507173a | 207 | /** |
| emilmont | 77:869cf507173a | 208 | * @} |
| emilmont | 77:869cf507173a | 209 | */ |
| emilmont | 77:869cf507173a | 210 | |
| emilmont | 77:869cf507173a | 211 | /** @defgroup UART_Mode |
| emilmont | 77:869cf507173a | 212 | * @{ |
| emilmont | 77:869cf507173a | 213 | */ |
| emilmont | 77:869cf507173a | 214 | #define UART_MODE_RX ((uint32_t)USART_CR1_RE) |
| emilmont | 77:869cf507173a | 215 | #define UART_MODE_TX ((uint32_t)USART_CR1_TE) |
| emilmont | 77:869cf507173a | 216 | #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| emilmont | 77:869cf507173a | 217 | #define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) |
| emilmont | 77:869cf507173a | 218 | /** |
| emilmont | 77:869cf507173a | 219 | * @} |
| emilmont | 77:869cf507173a | 220 | */ |
| emilmont | 77:869cf507173a | 221 | |
| emilmont | 77:869cf507173a | 222 | /** @defgroup UART_State |
| emilmont | 77:869cf507173a | 223 | * @{ |
| emilmont | 77:869cf507173a | 224 | */ |
| emilmont | 77:869cf507173a | 225 | #define UART_STATE_DISABLE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 226 | #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) |
| emilmont | 77:869cf507173a | 227 | #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ |
| emilmont | 77:869cf507173a | 228 | ((STATE) == UART_STATE_ENABLE)) |
| emilmont | 77:869cf507173a | 229 | /** |
| emilmont | 77:869cf507173a | 230 | * @} |
| emilmont | 77:869cf507173a | 231 | */ |
| emilmont | 77:869cf507173a | 232 | |
| emilmont | 77:869cf507173a | 233 | /** @defgroup UART_Over_Sampling |
| emilmont | 77:869cf507173a | 234 | * @{ |
| emilmont | 77:869cf507173a | 235 | */ |
| emilmont | 77:869cf507173a | 236 | #define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 237 | #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) |
| emilmont | 77:869cf507173a | 238 | #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ |
| emilmont | 77:869cf507173a | 239 | ((SAMPLING) == UART_OVERSAMPLING_8)) |
| emilmont | 77:869cf507173a | 240 | /** |
| emilmont | 77:869cf507173a | 241 | * @} |
| emilmont | 77:869cf507173a | 242 | */ |
| emilmont | 77:869cf507173a | 243 | |
| emilmont | 77:869cf507173a | 244 | /** @defgroup UART_LIN_Break_Detection_Length |
| emilmont | 77:869cf507173a | 245 | * @{ |
| emilmont | 77:869cf507173a | 246 | */ |
| emilmont | 77:869cf507173a | 247 | #define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 248 | #define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020) |
| emilmont | 77:869cf507173a | 249 | #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ |
| emilmont | 77:869cf507173a | 250 | ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) |
| emilmont | 77:869cf507173a | 251 | /** |
| emilmont | 77:869cf507173a | 252 | * @} |
| emilmont | 77:869cf507173a | 253 | */ |
| emilmont | 77:869cf507173a | 254 | |
| emilmont | 77:869cf507173a | 255 | /** @defgroup UART_WakeUp_functions |
| emilmont | 77:869cf507173a | 256 | * @{ |
| emilmont | 77:869cf507173a | 257 | */ |
| emilmont | 77:869cf507173a | 258 | #define UART_WAKEUPMETHODE_IDLELINE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 259 | #define UART_WAKEUPMETHODE_ADDRESSMARK ((uint32_t)0x00000800) |
| emilmont | 77:869cf507173a | 260 | #define IS_UART_WAKEUPMETHODE(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHODE_IDLELINE) || \ |
| emilmont | 77:869cf507173a | 261 | ((WAKEUP) == UART_WAKEUPMETHODE_ADDRESSMARK)) |
| emilmont | 77:869cf507173a | 262 | /** |
| emilmont | 77:869cf507173a | 263 | * @} |
| emilmont | 77:869cf507173a | 264 | */ |
| emilmont | 77:869cf507173a | 265 | |
| emilmont | 77:869cf507173a | 266 | /** @defgroup UART_Flags |
| emilmont | 77:869cf507173a | 267 | * Elements values convention: 0xXXXX |
| emilmont | 77:869cf507173a | 268 | * - 0xXXXX : Flag mask in the SR register |
| emilmont | 77:869cf507173a | 269 | * @{ |
| emilmont | 77:869cf507173a | 270 | */ |
| emilmont | 77:869cf507173a | 271 | #define UART_FLAG_CTS ((uint32_t)0x00000200) |
| emilmont | 77:869cf507173a | 272 | #define UART_FLAG_LBD ((uint32_t)0x00000100) |
| emilmont | 77:869cf507173a | 273 | #define UART_FLAG_TXE ((uint32_t)0x00000080) |
| emilmont | 77:869cf507173a | 274 | #define UART_FLAG_TC ((uint32_t)0x00000040) |
| emilmont | 77:869cf507173a | 275 | #define UART_FLAG_RXNE ((uint32_t)0x00000020) |
| emilmont | 77:869cf507173a | 276 | #define UART_FLAG_IDLE ((uint32_t)0x00000010) |
| emilmont | 77:869cf507173a | 277 | #define UART_FLAG_ORE ((uint32_t)0x00000008) |
| emilmont | 77:869cf507173a | 278 | #define UART_FLAG_NE ((uint32_t)0x00000004) |
| emilmont | 77:869cf507173a | 279 | #define UART_FLAG_FE ((uint32_t)0x00000002) |
| emilmont | 77:869cf507173a | 280 | #define UART_FLAG_PE ((uint32_t)0x00000001) |
| emilmont | 77:869cf507173a | 281 | /** |
| emilmont | 77:869cf507173a | 282 | * @} |
| emilmont | 77:869cf507173a | 283 | */ |
| emilmont | 77:869cf507173a | 284 | |
| emilmont | 77:869cf507173a | 285 | /** @defgroup UART_Interrupt_definition |
| emilmont | 77:869cf507173a | 286 | * Elements values convention: 0xY000XXXX |
| emilmont | 77:869cf507173a | 287 | * - XXXX : Interrupt mask in the XX register |
| emilmont | 77:869cf507173a | 288 | * - Y : Interrupt source register (2bits) |
| emilmont | 77:869cf507173a | 289 | * - 01: CR1 register |
| emilmont | 77:869cf507173a | 290 | * - 10: CR2 register |
| emilmont | 77:869cf507173a | 291 | * - 11: CR3 register |
| emilmont | 77:869cf507173a | 292 | * |
| emilmont | 77:869cf507173a | 293 | * @{ |
| emilmont | 77:869cf507173a | 294 | */ |
| emilmont | 77:869cf507173a | 295 | #define UART_IT_PE ((uint32_t)0x10000100) |
| emilmont | 77:869cf507173a | 296 | #define UART_IT_TXE ((uint32_t)0x10000080) |
| emilmont | 77:869cf507173a | 297 | #define UART_IT_TC ((uint32_t)0x10000040) |
| emilmont | 77:869cf507173a | 298 | #define UART_IT_RXNE ((uint32_t)0x10000020) |
| emilmont | 77:869cf507173a | 299 | #define UART_IT_IDLE ((uint32_t)0x10000010) |
| emilmont | 77:869cf507173a | 300 | |
| emilmont | 77:869cf507173a | 301 | #define UART_IT_LBD ((uint32_t)0x20000040) |
| emilmont | 77:869cf507173a | 302 | #define UART_IT_CTS ((uint32_t)0x30000400) |
| bogdanm | 85:024bf7f99721 | 303 | |
| emilmont | 77:869cf507173a | 304 | #define UART_IT_ERR ((uint32_t)0x30000001) |
| emilmont | 77:869cf507173a | 305 | |
| emilmont | 77:869cf507173a | 306 | /** |
| emilmont | 77:869cf507173a | 307 | * @} |
| emilmont | 77:869cf507173a | 308 | */ |
| bogdanm | 85:024bf7f99721 | 309 | |
| emilmont | 77:869cf507173a | 310 | /** |
| emilmont | 77:869cf507173a | 311 | * @} |
| emilmont | 77:869cf507173a | 312 | */ |
| emilmont | 77:869cf507173a | 313 | |
| emilmont | 77:869cf507173a | 314 | /* Exported macro ------------------------------------------------------------*/ |
| bogdanm | 85:024bf7f99721 | 315 | |
| bogdanm | 85:024bf7f99721 | 316 | /** @brief Reset UART handle state |
| bogdanm | 85:024bf7f99721 | 317 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 318 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| bogdanm | 85:024bf7f99721 | 319 | * UART peripheral. |
| bogdanm | 85:024bf7f99721 | 320 | * @retval None |
| bogdanm | 85:024bf7f99721 | 321 | */ |
| bogdanm | 85:024bf7f99721 | 322 | #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) |
| bogdanm | 85:024bf7f99721 | 323 | |
| bogdanm | 85:024bf7f99721 | 324 | /** @brief Flushs the UART DR register |
| bogdanm | 85:024bf7f99721 | 325 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 326 | */ |
| bogdanm | 85:024bf7f99721 | 327 | #define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
| bogdanm | 85:024bf7f99721 | 328 | |
| emilmont | 77:869cf507173a | 329 | /** @brief Checks whether the specified UART flag is set or not. |
| emilmont | 77:869cf507173a | 330 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 331 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 332 | * UART peripheral. |
| emilmont | 77:869cf507173a | 333 | * @param __FLAG__: specifies the flag to check. |
| emilmont | 77:869cf507173a | 334 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 335 | * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) |
| emilmont | 77:869cf507173a | 336 | * @arg UART_FLAG_LBD: LIN Break detection flag |
| emilmont | 77:869cf507173a | 337 | * @arg UART_FLAG_TXE: Transmit data register empty flag |
| emilmont | 77:869cf507173a | 338 | * @arg UART_FLAG_TC: Transmission Complete flag |
| emilmont | 77:869cf507173a | 339 | * @arg UART_FLAG_RXNE: Receive data register not empty flag |
| emilmont | 77:869cf507173a | 340 | * @arg UART_FLAG_IDLE: Idle Line detection flag |
| emilmont | 77:869cf507173a | 341 | * @arg UART_FLAG_ORE: OverRun Error flag |
| emilmont | 77:869cf507173a | 342 | * @arg UART_FLAG_NE: Noise Error flag |
| emilmont | 77:869cf507173a | 343 | * @arg UART_FLAG_FE: Framing Error flag |
| emilmont | 77:869cf507173a | 344 | * @arg UART_FLAG_PE: Parity Error flag |
| emilmont | 77:869cf507173a | 345 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
| emilmont | 77:869cf507173a | 346 | */ |
| emilmont | 77:869cf507173a | 347 | |
| emilmont | 77:869cf507173a | 348 | #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
| emilmont | 77:869cf507173a | 349 | |
| emilmont | 77:869cf507173a | 350 | /** @brief Clears the specified UART pending flag. |
| emilmont | 77:869cf507173a | 351 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 352 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 353 | * UART peripheral. |
| emilmont | 77:869cf507173a | 354 | * @param __FLAG__: specifies the flag to check. |
| emilmont | 77:869cf507173a | 355 | * This parameter can be any combination of the following values: |
| emilmont | 77:869cf507173a | 356 | * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). |
| emilmont | 77:869cf507173a | 357 | * @arg UART_FLAG_LBD: LIN Break detection flag. |
| emilmont | 77:869cf507173a | 358 | * @arg UART_FLAG_TC: Transmission Complete flag. |
| emilmont | 77:869cf507173a | 359 | * @arg UART_FLAG_RXNE: Receive data register not empty flag. |
| emilmont | 77:869cf507173a | 360 | * |
| emilmont | 77:869cf507173a | 361 | * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun |
| emilmont | 77:869cf507173a | 362 | * error) and IDLE (Idle line detected) flags are cleared by software |
| emilmont | 77:869cf507173a | 363 | * sequence: a read operation to USART_SR register followed by a read |
| emilmont | 77:869cf507173a | 364 | * operation to USART_DR register. |
| emilmont | 77:869cf507173a | 365 | * @note RXNE flag can be also cleared by a read to the USART_DR register. |
| emilmont | 77:869cf507173a | 366 | * @note TC flag can be also cleared by software sequence: a read operation to |
| emilmont | 77:869cf507173a | 367 | * USART_SR register followed by a write operation to USART_DR register. |
| emilmont | 77:869cf507173a | 368 | * @note TXE flag is cleared only by a write to the USART_DR register. |
| emilmont | 77:869cf507173a | 369 | * |
| emilmont | 77:869cf507173a | 370 | * @retval None |
| emilmont | 77:869cf507173a | 371 | */ |
| Kojto | 90:cb3d968589d8 | 372 | #define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
| Kojto | 90:cb3d968589d8 | 373 | |
| Kojto | 90:cb3d968589d8 | 374 | /** @brief Clear the UART PE pending flag. |
| Kojto | 90:cb3d968589d8 | 375 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 376 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 377 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 378 | * @retval None |
| Kojto | 90:cb3d968589d8 | 379 | */ |
| Kojto | 90:cb3d968589d8 | 380 | #define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\ |
| Kojto | 90:cb3d968589d8 | 381 | (__HANDLE__)->Instance->DR;}while(0) |
| Kojto | 90:cb3d968589d8 | 382 | /** @brief Clear the UART FE pending flag. |
| Kojto | 90:cb3d968589d8 | 383 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 384 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 385 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 386 | * @retval None |
| Kojto | 90:cb3d968589d8 | 387 | */ |
| Kojto | 90:cb3d968589d8 | 388 | #define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| emilmont | 77:869cf507173a | 389 | |
| Kojto | 90:cb3d968589d8 | 390 | /** @brief Clear the UART NE pending flag. |
| Kojto | 90:cb3d968589d8 | 391 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 392 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 393 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 394 | * @retval None |
| Kojto | 90:cb3d968589d8 | 395 | */ |
| Kojto | 90:cb3d968589d8 | 396 | #define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 397 | |
| Kojto | 90:cb3d968589d8 | 398 | /** @brief Clear the UART ORE pending flag. |
| Kojto | 90:cb3d968589d8 | 399 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 400 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 401 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 402 | * @retval None |
| Kojto | 90:cb3d968589d8 | 403 | */ |
| Kojto | 90:cb3d968589d8 | 404 | #define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 405 | |
| Kojto | 90:cb3d968589d8 | 406 | /** @brief Clear the UART IDLE pending flag. |
| Kojto | 90:cb3d968589d8 | 407 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 408 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 409 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 410 | * @retval None |
| Kojto | 90:cb3d968589d8 | 411 | */ |
| Kojto | 90:cb3d968589d8 | 412 | #define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 413 | |
| emilmont | 77:869cf507173a | 414 | /** @brief Enables or disables the specified UART interrupt. |
| emilmont | 77:869cf507173a | 415 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 416 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 417 | * UART peripheral. |
| emilmont | 77:869cf507173a | 418 | * @param __INTERRUPT__: specifies the UART interrupt source to check. |
| emilmont | 77:869cf507173a | 419 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 420 | * @arg UART_IT_CTS: CTS change interrupt |
| emilmont | 77:869cf507173a | 421 | * @arg UART_IT_LBD: LIN Break detection interrupt |
| emilmont | 77:869cf507173a | 422 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| emilmont | 77:869cf507173a | 423 | * @arg UART_IT_TC: Transmission complete interrupt |
| emilmont | 77:869cf507173a | 424 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| emilmont | 77:869cf507173a | 425 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| emilmont | 77:869cf507173a | 426 | * @arg UART_IT_PE: Parity Error interrupt |
| emilmont | 77:869cf507173a | 427 | * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| emilmont | 77:869cf507173a | 428 | * @param NewState: new state of the specified UART interrupt. |
| emilmont | 77:869cf507173a | 429 | * This parameter can be: ENABLE or DISABLE. |
| emilmont | 77:869cf507173a | 430 | * @retval None |
| emilmont | 77:869cf507173a | 431 | */ |
| emilmont | 77:869cf507173a | 432 | #define UART_IT_MASK ((uint32_t)0x0000FFFF) |
| emilmont | 77:869cf507173a | 433 | #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 434 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 435 | ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) |
| emilmont | 77:869cf507173a | 436 | #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 437 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 438 | ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) |
| emilmont | 77:869cf507173a | 439 | |
| emilmont | 77:869cf507173a | 440 | /** @brief Checks whether the specified UART interrupt has occurred or not. |
| emilmont | 77:869cf507173a | 441 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 442 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 443 | * UART peripheral. |
| emilmont | 77:869cf507173a | 444 | * @param __IT__: specifies the UART interrupt source to check. |
| emilmont | 77:869cf507173a | 445 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 446 | * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) |
| emilmont | 77:869cf507173a | 447 | * @arg UART_IT_LBD: LIN Break detection interrupt |
| emilmont | 77:869cf507173a | 448 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| emilmont | 77:869cf507173a | 449 | * @arg UART_IT_TC: Transmission complete interrupt |
| emilmont | 77:869cf507173a | 450 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| emilmont | 77:869cf507173a | 451 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| emilmont | 77:869cf507173a | 452 | * @arg USART_IT_ERR: Error interrupt |
| emilmont | 77:869cf507173a | 453 | * @retval The new state of __IT__ (TRUE or FALSE). |
| emilmont | 77:869cf507173a | 454 | */ |
| emilmont | 77:869cf507173a | 455 | #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ |
| emilmont | 77:869cf507173a | 456 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) |
| emilmont | 77:869cf507173a | 457 | |
| Kojto | 90:cb3d968589d8 | 458 | /** @brief Enable CTS flow control |
| Kojto | 90:cb3d968589d8 | 459 | * This macro allows to enable CTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 460 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 461 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 462 | * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 463 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 464 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 465 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 466 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 467 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 468 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 469 | * @retval None |
| Kojto | 90:cb3d968589d8 | 470 | */ |
| Kojto | 90:cb3d968589d8 | 471 | #define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 472 | do{ \ |
| Kojto | 90:cb3d968589d8 | 473 | SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ |
| Kojto | 90:cb3d968589d8 | 474 | (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ |
| Kojto | 90:cb3d968589d8 | 475 | } while(0) |
| Kojto | 90:cb3d968589d8 | 476 | |
| Kojto | 90:cb3d968589d8 | 477 | /** @brief Disable CTS flow control |
| Kojto | 90:cb3d968589d8 | 478 | * This macro allows to disable CTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 479 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 480 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 481 | * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 482 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 483 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 484 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 485 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 486 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 487 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 488 | * @retval None |
| Kojto | 90:cb3d968589d8 | 489 | */ |
| Kojto | 90:cb3d968589d8 | 490 | #define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 491 | do{ \ |
| Kojto | 90:cb3d968589d8 | 492 | CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ |
| Kojto | 90:cb3d968589d8 | 493 | (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ |
| Kojto | 90:cb3d968589d8 | 494 | } while(0) |
| Kojto | 90:cb3d968589d8 | 495 | |
| Kojto | 90:cb3d968589d8 | 496 | /** @brief Enable RTS flow control |
| Kojto | 90:cb3d968589d8 | 497 | * This macro allows to enable RTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 498 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 499 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 500 | * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 501 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 502 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 503 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 504 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 505 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 506 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 507 | * @retval None |
| Kojto | 90:cb3d968589d8 | 508 | */ |
| Kojto | 90:cb3d968589d8 | 509 | #define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 510 | do{ \ |
| Kojto | 90:cb3d968589d8 | 511 | SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ |
| Kojto | 90:cb3d968589d8 | 512 | (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ |
| Kojto | 90:cb3d968589d8 | 513 | } while(0) |
| Kojto | 90:cb3d968589d8 | 514 | |
| Kojto | 90:cb3d968589d8 | 515 | /** @brief Disable RTS flow control |
| Kojto | 90:cb3d968589d8 | 516 | * This macro allows to disable RTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 517 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 518 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 519 | * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 520 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 521 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 522 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 523 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 524 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 525 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 526 | * @retval None |
| Kojto | 90:cb3d968589d8 | 527 | */ |
| Kojto | 90:cb3d968589d8 | 528 | #define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 529 | do{ \ |
| Kojto | 90:cb3d968589d8 | 530 | CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ |
| Kojto | 90:cb3d968589d8 | 531 | (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ |
| Kojto | 90:cb3d968589d8 | 532 | } while(0) |
| Kojto | 90:cb3d968589d8 | 533 | |
| emilmont | 77:869cf507173a | 534 | /** @brief macros to enables or disables the UART's one bit sampling method |
| emilmont | 77:869cf507173a | 535 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 536 | * @retval None |
| emilmont | 77:869cf507173a | 537 | */ |
| emilmont | 77:869cf507173a | 538 | #define __HAL_UART_ONEBIT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
| emilmont | 77:869cf507173a | 539 | #define __HAL_UART_ONEBIT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) |
| emilmont | 77:869cf507173a | 540 | |
| emilmont | 77:869cf507173a | 541 | #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
| emilmont | 77:869cf507173a | 542 | #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
| emilmont | 77:869cf507173a | 543 | |
| emilmont | 77:869cf507173a | 544 | #define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) |
| emilmont | 77:869cf507173a | 545 | #define __DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (__DIV_SAMPLING16((_PCLK_), (_BAUD_))/100) |
| emilmont | 77:869cf507173a | 546 | #define __DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((__DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) |
| emilmont | 77:869cf507173a | 547 | #define __UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F)) |
| emilmont | 77:869cf507173a | 548 | |
| emilmont | 77:869cf507173a | 549 | #define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_))) |
| emilmont | 77:869cf507173a | 550 | #define __DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (__DIV_SAMPLING8((_PCLK_), (_BAUD_))/100) |
| emilmont | 77:869cf507173a | 551 | #define __DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((__DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) |
| emilmont | 77:869cf507173a | 552 | #define __UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F)) |
| emilmont | 77:869cf507173a | 553 | |
| emilmont | 77:869cf507173a | 554 | #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001) |
| emilmont | 77:869cf507173a | 555 | #define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) |
| emilmont | 77:869cf507173a | 556 | |
| emilmont | 77:869cf507173a | 557 | /* Exported functions --------------------------------------------------------*/ |
| emilmont | 77:869cf507173a | 558 | /* Initialization/de-initialization functions **********************************/ |
| emilmont | 77:869cf507173a | 559 | HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 560 | HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 561 | HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); |
| emilmont | 77:869cf507173a | 562 | HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethode); |
| emilmont | 77:869cf507173a | 563 | HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 564 | void HAL_UART_MspInit(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 565 | void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 566 | |
| emilmont | 77:869cf507173a | 567 | /* IO operation functions *******************************************************/ |
| emilmont | 77:869cf507173a | 568 | HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| emilmont | 77:869cf507173a | 569 | HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| emilmont | 77:869cf507173a | 570 | HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 571 | HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 572 | HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 573 | HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 574 | HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 575 | HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 576 | HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 577 | void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 578 | void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 579 | void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 580 | void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 581 | void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 582 | void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 583 | |
| emilmont | 77:869cf507173a | 584 | /* Peripheral Control functions ************************************************/ |
| emilmont | 77:869cf507173a | 585 | HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 586 | HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 587 | HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 588 | HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 589 | HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 590 | |
| emilmont | 77:869cf507173a | 591 | /* Peripheral State functions **************************************************/ |
| emilmont | 77:869cf507173a | 592 | HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 593 | uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 594 | |
| emilmont | 77:869cf507173a | 595 | /** |
| emilmont | 77:869cf507173a | 596 | * @} |
| emilmont | 77:869cf507173a | 597 | */ |
| emilmont | 77:869cf507173a | 598 | |
| emilmont | 77:869cf507173a | 599 | /** |
| emilmont | 77:869cf507173a | 600 | * @} |
| emilmont | 77:869cf507173a | 601 | */ |
| emilmont | 77:869cf507173a | 602 | |
| emilmont | 77:869cf507173a | 603 | #ifdef __cplusplus |
| emilmont | 77:869cf507173a | 604 | } |
| emilmont | 77:869cf507173a | 605 | #endif |
| emilmont | 77:869cf507173a | 606 | |
| emilmont | 77:869cf507173a | 607 | #endif /* __STM32F4xx_HAL_UART_H */ |
| emilmont | 77:869cf507173a | 608 | |
| emilmont | 77:869cf507173a | 609 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |