Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_L053R8/stm32l0xx_hal_lcd.h
- Committer:
- bogdanm
- Date:
- 2014-05-19
- Revision:
- 84:0b3ab51c8877
- Child:
- 92:4fc01daae5a5
File content as of revision 84:0b3ab51c8877:
/**
******************************************************************************
* @file stm32l0xx_hal_lcd.h
* @author MCD Application Team
* @version V1.0.0
* @date 22-April-2014
* @brief Header file of LCD Controller HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_LCD_H
#define __STM32L0xx_HAL_LCD_H
#ifdef __cplusplus
extern "C" {
#endif
#if !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L062xx) && !defined (STM32L061xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
/** @addtogroup LCD
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief LCD Init structure definition
*/
typedef struct
{
uint32_t Prescaler; /*!< Configures the LCD Prescaler.
This parameter can be one value of @ref LCD_Prescaler */
uint32_t Divider; /*!< Configures the LCD Divider.
This parameter can be one value of @ref LCD_Divider */
uint32_t Duty; /*!< Configures the LCD Duty.
This parameter can be one value of @ref LCD_Duty */
uint32_t Bias; /*!< Configures the LCD Bias.
This parameter can be one value of @ref LCD_Bias */
uint32_t VoltageSource; /*!< Selects the LCD Voltage source.
This parameter can be one value of @ref LCD_Voltage_Source */
uint32_t Contrast; /*!< Configures the LCD Contrast.
This parameter can be one value of @ref LCD_Contrast */
uint32_t DeadTime; /*!< Configures the LCD Dead Time.
This parameter can be one value of @ref LCD_DeadTime */
uint32_t PulseOnDuration; /*!< Configures the LCD Pulse On Duration.
This parameter can be one value of @ref LCD_PulseOnDuration */
uint32_t HighDrive; /*!< Enable or disable the low resistance divider.
This parameter can be set to ENABLE or DISABLE. */
uint32_t BlinkMode; /*!< Configures the LCD Blink Mode.
This parameter can be one value of @ref LCD_BlinkMode */
uint32_t BlinkFrequency; /*!< Configures the LCD Blink frequency.
This parameter can be one value of @ref LCD_BlinkFrequency */
}LCD_InitTypeDef;
/**
* @brief HAL LCD State structures definition
*/
typedef enum
{
HAL_LCD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
HAL_LCD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_LCD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
HAL_LCD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
HAL_LCD_STATE_ERROR = 0x04 /*!< Error */
}HAL_LCD_StateTypeDef;
/**
* @brief HAL LCD Error Code structure definition
*/
typedef enum
{
HAL_LCD_ERROR_NONE = 0x00, /*!< No error */
HAL_LCD_ERROR_FCRSF = 0x01, /*!< Synchro flag timeout error */
HAL_LCD_ERROR_UDR = 0x02, /*!< Update display request flag timeout error */
HAL_LCD_ERROR_UDD = 0x04, /*!< Update display done flag timeout error */
HAL_LCD_ERROR_ENS = 0x08, /*!< LCD enabled status flag timeout error */
HAL_LCD_ERROR_RDY = 0x10 /*!< LCD Booster ready timeout error */
}HAL_LCD_ErrorTypeDef;
/**
* @brief UART handle Structure definition
*/
typedef struct
{
LCD_TypeDef *Instance; /* LCD registers base address */
LCD_InitTypeDef Init; /* LCD communication parameters */
HAL_LockTypeDef Lock; /* Locking object */
__IO HAL_LCD_StateTypeDef State; /* LCD communication state */
__IO HAL_LCD_ErrorTypeDef ErrorCode; /* LCD Error code */
}LCD_HandleTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup LCD_Exported_Constants
* @{
*/
#define IS_LCD_ALL_INSTANCE(INSTANCE) ((INSTANCE) == LCD)
/** @defgroup LCD_Prescaler
* @{
*/
#define LCD_PRESCALER_1 ((uint32_t)0x00000000) /*!< CLKPS = LCDCLK */
#define LCD_PRESCALER_2 ((uint32_t)0x00400000) /*!< CLKPS = LCDCLK/2 */
#define LCD_PRESCALER_4 ((uint32_t)0x00800000) /*!< CLKPS = LCDCLK/4 */
#define LCD_PRESCALER_8 ((uint32_t)0x00C00000) /*!< CLKPS = LCDCLK/8 */
#define LCD_PRESCALER_16 ((uint32_t)0x01000000) /*!< CLKPS = LCDCLK/16 */
#define LCD_PRESCALER_32 ((uint32_t)0x01400000) /*!< CLKPS = LCDCLK/32 */
#define LCD_PRESCALER_64 ((uint32_t)0x01800000) /*!< CLKPS = LCDCLK/64 */
#define LCD_PRESCALER_128 ((uint32_t)0x01C00000) /*!< CLKPS = LCDCLK/128 */
#define LCD_PRESCALER_256 ((uint32_t)0x02000000) /*!< CLKPS = LCDCLK/256 */
#define LCD_PRESCALER_512 ((uint32_t)0x02400000) /*!< CLKPS = LCDCLK/512 */
#define LCD_PRESCALER_1024 ((uint32_t)0x02800000) /*!< CLKPS = LCDCLK/1024 */
#define LCD_PRESCALER_2048 ((uint32_t)0x02C00000) /*!< CLKPS = LCDCLK/2048 */
#define LCD_PRESCALER_4096 ((uint32_t)0x03000000) /*!< CLKPS = LCDCLK/4096 */
#define LCD_PRESCALER_8192 ((uint32_t)0x03400000) /*!< CLKPS = LCDCLK/8192 */
#define LCD_PRESCALER_16384 ((uint32_t)0x03800000) /*!< CLKPS = LCDCLK/16384 */
#define LCD_PRESCALER_32768 ((uint32_t)0x03C00000) /*!< CLKPS = LCDCLK/32768 */
#define IS_LCD_PRESCALER(PRESCALER) (((PRESCALER) == LCD_PRESCALER_1) || \
((PRESCALER) == LCD_PRESCALER_2) || \
((PRESCALER) == LCD_PRESCALER_4) || \
((PRESCALER) == LCD_PRESCALER_8) || \
((PRESCALER) == LCD_PRESCALER_16) || \
((PRESCALER) == LCD_PRESCALER_32) || \
((PRESCALER) == LCD_PRESCALER_64) || \
((PRESCALER) == LCD_PRESCALER_128) || \
((PRESCALER) == LCD_PRESCALER_256) || \
((PRESCALER) == LCD_PRESCALER_512) || \
((PRESCALER) == LCD_PRESCALER_1024) || \
((PRESCALER) == LCD_PRESCALER_2048) || \
((PRESCALER) == LCD_PRESCALER_4096) || \
((PRESCALER) == LCD_PRESCALER_8192) || \
((PRESCALER) == LCD_PRESCALER_16384) || \
((PRESCALER) == LCD_PRESCALER_32768))
/**
* @}
*/
/** @defgroup LCD_Divider
* @{
*/
#define LCD_DIVIDER_16 ((uint32_t)0x00000000) /*!< LCD frequency = CLKPS/16 */
#define LCD_DIVIDER_17 ((uint32_t)0x00040000) /*!< LCD frequency = CLKPS/17 */
#define LCD_DIVIDER_18 ((uint32_t)0x00080000) /*!< LCD frequency = CLKPS/18 */
#define LCD_DIVIDER_19 ((uint32_t)0x000C0000) /*!< LCD frequency = CLKPS/19 */
#define LCD_DIVIDER_20 ((uint32_t)0x00100000) /*!< LCD frequency = CLKPS/20 */
#define LCD_DIVIDER_21 ((uint32_t)0x00140000) /*!< LCD frequency = CLKPS/21 */
#define LCD_DIVIDER_22 ((uint32_t)0x00180000) /*!< LCD frequency = CLKPS/22 */
#define LCD_DIVIDER_23 ((uint32_t)0x001C0000) /*!< LCD frequency = CLKPS/23 */
#define LCD_DIVIDER_24 ((uint32_t)0x00200000) /*!< LCD frequency = CLKPS/24 */
#define LCD_DIVIDER_25 ((uint32_t)0x00240000) /*!< LCD frequency = CLKPS/25 */
#define LCD_DIVIDER_26 ((uint32_t)0x00280000) /*!< LCD frequency = CLKPS/26 */
#define LCD_DIVIDER_27 ((uint32_t)0x002C0000) /*!< LCD frequency = CLKPS/27 */
#define LCD_DIVIDER_28 ((uint32_t)0x00300000) /*!< LCD frequency = CLKPS/28 */
#define LCD_DIVIDER_29 ((uint32_t)0x00340000) /*!< LCD frequency = CLKPS/29 */
#define LCD_DIVIDER_30 ((uint32_t)0x00380000) /*!< LCD frequency = CLKPS/30 */
#define LCD_DIVIDER_31 ((uint32_t)0x003C0000) /*!< LCD frequency = CLKPS/31 */
#define IS_LCD_DIVIDER(DIVIDER) (((DIVIDER) == LCD_DIVIDER_16) || \
((DIVIDER) == LCD_DIVIDER_17) || \
((DIVIDER) == LCD_DIVIDER_18) || \
((DIVIDER) == LCD_DIVIDER_19) || \
((DIVIDER) == LCD_DIVIDER_20) || \
((DIVIDER) == LCD_DIVIDER_21) || \
((DIVIDER) == LCD_DIVIDER_22) || \
((DIVIDER) == LCD_DIVIDER_23) || \
((DIVIDER) == LCD_DIVIDER_24) || \
((DIVIDER) == LCD_DIVIDER_25) || \
((DIVIDER) == LCD_DIVIDER_26) || \
((DIVIDER) == LCD_DIVIDER_27) || \
((DIVIDER) == LCD_DIVIDER_28) || \
((DIVIDER) == LCD_DIVIDER_29) || \
((DIVIDER) == LCD_DIVIDER_30) || \
((DIVIDER) == LCD_DIVIDER_31))
/**
* @}
*/
/** @defgroup LCD_Duty
* @{
*/
#define LCD_DUTY_STATIC ((uint32_t)0x00000000) /*!< Static duty */
#define LCD_DUTY_1_2 ((uint32_t)0x00000004) /*!< 1/2 duty */
#define LCD_DUTY_1_3 ((uint32_t)0x00000008) /*!< 1/3 duty */
#define LCD_DUTY_1_4 ((uint32_t)0x0000000C) /*!< 1/4 duty */
#define LCD_DUTY_1_8 ((uint32_t)0x00000010) /*!< 1/4 duty */
#define IS_LCD_DUTY(DUTY) (((DUTY) == LCD_DUTY_STATIC) || \
((DUTY) == LCD_DUTY_1_2) || \
((DUTY) == LCD_DUTY_1_3) || \
((DUTY) == LCD_DUTY_1_4) || \
((DUTY) == LCD_DUTY_1_8))
/**
* @}
*/
/** @defgroup LCD_Bias
* @{
*/
#define LCD_BIAS_1_4 ((uint32_t)0x00000000) /*!< 1/4 Bias */
#define LCD_BIAS_1_2 LCD_CR_BIAS_0 /*!< 1/2 Bias */
#define LCD_BIAS_1_3 LCD_CR_BIAS_1 /*!< 1/3 Bias */
#define IS_LCD_BIAS(BIAS) (((BIAS) == LCD_BIAS_1_4) || \
((BIAS) == LCD_BIAS_1_2) || \
((BIAS) == LCD_BIAS_1_3))
/**
* @}
*/
/** @defgroup LCD_Voltage_Source
* @{
*/
#define LCD_VOLTAGESOURCE_INTERNAL ((uint32_t)0x00000000) /*!< Internal voltage source for the LCD */
#define LCD_VOLTAGESOURCE_EXTERNAL LCD_CR_VSEL /*!< External voltage source for the LCD */
#define IS_LCD_VOLTAGE_SOURCE(SOURCE) (((SOURCE) == LCD_VOLTAGESOURCE_INTERNAL) || \
((SOURCE) == LCD_VOLTAGESOURCE_EXTERNAL))
/**
* @}
*/
/** @defgroup LCD_Interrupts
* @{
*/
#define LCD_IT_SOF LCD_FCR_SOFIE
#define LCD_IT_UDD LCD_FCR_UDDIE
#define IS_LCD_IT(IT) ((((IT) & (uint32_t)0xFFFFFFF5) == 0x00) && ((IT) != 0x00))
#define IS_LCD_GET_IT(IT) (((IT) == LCD_IT_SOF) || ((IT) == LCD_IT_UDD))
/**
* @}
*/
/** @defgroup LCD_PulseOnDuration
* @{
*/
#define LCD_PULSEONDURATION_0 ((uint32_t)0x00000000) /*!< Pulse ON duration = 0 pulse */
#define LCD_PULSEONDURATION_1 ((uint32_t)0x00000010) /*!< Pulse ON duration = 1/CK_PS */
#define LCD_PULSEONDURATION_2 ((uint32_t)0x00000020) /*!< Pulse ON duration = 2/CK_PS */
#define LCD_PULSEONDURATION_3 ((uint32_t)0x00000030) /*!< Pulse ON duration = 3/CK_PS */
#define LCD_PULSEONDURATION_4 ((uint32_t)0x00000040) /*!< Pulse ON duration = 4/CK_PS */
#define LCD_PULSEONDURATION_5 ((uint32_t)0x00000050) /*!< Pulse ON duration = 5/CK_PS */
#define LCD_PULSEONDURATION_6 ((uint32_t)0x00000060) /*!< Pulse ON duration = 6/CK_PS */
#define LCD_PULSEONDURATION_7 ((uint32_t)0x00000070) /*!< Pulse ON duration = 7/CK_PS */
#define IS_LCD_PULSE_ON_DURATION(DURATION) (((DURATION) == LCD_PULSEONDURATION_0) || \
((DURATION) == LCD_PULSEONDURATION_1) || \
((DURATION) == LCD_PULSEONDURATION_2) || \
((DURATION) == LCD_PULSEONDURATION_3) || \
((DURATION) == LCD_PULSEONDURATION_4) || \
((DURATION) == LCD_PULSEONDURATION_5) || \
((DURATION) == LCD_PULSEONDURATION_6) || \
((DURATION) == LCD_PULSEONDURATION_7))
/**
* @}
*/
/** @defgroup LCD_DeadTime
* @{
*/
#define LCD_DEADTIME_0 ((uint32_t)0x00000000) /*!< No dead Time */
#define LCD_DEADTIME_1 ((uint32_t)0x00000080) /*!< One Phase between different couple of Frame */
#define LCD_DEADTIME_2 ((uint32_t)0x00000100) /*!< Two Phase between different couple of Frame */
#define LCD_DEADTIME_3 ((uint32_t)0x00000180) /*!< Three Phase between different couple of Frame */
#define LCD_DEADTIME_4 ((uint32_t)0x00000200) /*!< Four Phase between different couple of Frame */
#define LCD_DEADTIME_5 ((uint32_t)0x00000280) /*!< Five Phase between different couple of Frame */
#define LCD_DEADTIME_6 ((uint32_t)0x00000300) /*!< Six Phase between different couple of Frame */
#define LCD_DEADTIME_7 ((uint32_t)0x00000380) /*!< Seven Phase between different couple of Frame */
#define IS_LCD_DEAD_TIME(TIME) (((TIME) == LCD_DEADTIME_0) || \
((TIME) == LCD_DEADTIME_1) || \
((TIME) == LCD_DEADTIME_2) || \
((TIME) == LCD_DEADTIME_3) || \
((TIME) == LCD_DEADTIME_4) || \
((TIME) == LCD_DEADTIME_5) || \
((TIME) == LCD_DEADTIME_6) || \
((TIME) == LCD_DEADTIME_7))
/**
* @}
*/
/** @defgroup LCD_BlinkMode
* @{
*/
#define LCD_BLINKMODE_OFF ((uint32_t)0x00000000) /*!< Blink disabled */
#define LCD_BLINKMODE_SEG0_COM0 ((uint32_t)0x00010000) /*!< Blink enabled on SEG[0], COM[0] (1 pixel) */
#define LCD_BLINKMODE_SEG0_ALLCOM ((uint32_t)0x00020000) /*!< Blink enabled on SEG[0], all COM (up to
8 pixels according to the programmed duty) */
#define LCD_BLINKMODE_ALLSEG_ALLCOM ((uint32_t)0x00030000) /*!< Blink enabled on all SEG and all COM (all pixels) */
#define IS_LCD_BLINK_MODE(MODE) (((MODE) == LCD_BLINKMODE_OFF) || \
((MODE) == LCD_BLINKMODE_SEG0_COM0) || \
((MODE) == LCD_BLINKMODE_SEG0_ALLCOM) || \
((MODE) == LCD_BLINKMODE_ALLSEG_ALLCOM))
/**
* @}
*/
/** @defgroup LCD_BlinkFrequency
* @{
*/
#define LCD_BLINKFREQUENCY_DIV8 ((uint32_t)0x00000000) /*!< The Blink frequency = fLCD/8 */
#define LCD_BLINKFREQUENCY_DIV16 ((uint32_t)0x00002000) /*!< The Blink frequency = fLCD/16 */
#define LCD_BLINKFREQUENCY_DIV32 ((uint32_t)0x00004000) /*!< The Blink frequency = fLCD/32 */
#define LCD_BLINKFREQUENCY_DIV64 ((uint32_t)0x00006000) /*!< The Blink frequency = fLCD/64 */
#define LCD_BLINKFREQUENCY_DIV128 ((uint32_t)0x00008000) /*!< The Blink frequency = fLCD/128 */
#define LCD_BLINKFREQUENCY_DIV256 ((uint32_t)0x0000A000) /*!< The Blink frequency = fLCD/256 */
#define LCD_BLINKFREQUENCY_DIV512 ((uint32_t)0x0000C000) /*!< The Blink frequency = fLCD/512 */
#define LCD_BLINKFREQUENCY_DIV1024 ((uint32_t)0x0000E000) /*!< The Blink frequency = fLCD/1024 */
#define IS_LCD_BLINK_FREQUENCY(FREQUENCY) (((FREQUENCY) == LCD_BLINKFREQUENCY_DIV8) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV16) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV32) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV64) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV128) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV256) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV512) || \
((FREQUENCY) == LCD_BLINKFREQUENCY_DIV1024))
/**
* @}
*/
/** @defgroup LCD_Contrast
* @{
*/
#define LCD_CONTRASTLEVEL_0 ((uint32_t)0x00000000) /*!< Maximum Voltage = 2.60V */
#define LCD_CONTRASTLEVEL_1 ((uint32_t)0x00000400) /*!< Maximum Voltage = 2.73V */
#define LCD_CONTRASTLEVEL_2 ((uint32_t)0x00000800) /*!< Maximum Voltage = 2.86V */
#define LCD_CONTRASTLEVEL_3 ((uint32_t)0x00000C00) /*!< Maximum Voltage = 2.99V */
#define LCD_CONTRASTLEVEL_4 ((uint32_t)0x00001000) /*!< Maximum Voltage = 3.12V */
#define LCD_CONTRASTLEVEL_5 ((uint32_t)0x00001400) /*!< Maximum Voltage = 3.25V */
#define LCD_CONTRASTLEVEL_6 ((uint32_t)0x00001800) /*!< Maximum Voltage = 3.38V */
#define LCD_CONTRASTLEVEL_7 ((uint32_t)0x00001C00) /*!< Maximum Voltage = 3.51V */
#define IS_LCD_CONTRAST(CONTRAST) (((CONTRAST) == LCD_CONTRASTLEVEL_0) || \
((CONTRAST) == LCD_CONTRASTLEVEL_1) || \
((CONTRAST) == LCD_CONTRASTLEVEL_2) || \
((CONTRAST) == LCD_CONTRASTLEVEL_3) || \
((CONTRAST) == LCD_CONTRASTLEVEL_4) || \
((CONTRAST) == LCD_CONTRASTLEVEL_5) || \
((CONTRAST) == LCD_CONTRASTLEVEL_6) || \
((CONTRAST) == LCD_CONTRASTLEVEL_7))
/**
* @}
*/
/** @defgroup LCD_Flag
* @{
*/
#define LCD_FLAG_ENS LCD_SR_ENS
#define LCD_FLAG_SOF LCD_SR_SOF
#define LCD_FLAG_UDR LCD_SR_UDR
#define LCD_FLAG_UDD LCD_SR_UDD
#define LCD_FLAG_RDY LCD_SR_RDY
#define LCD_FLAG_FCRSF LCD_SR_FCRSR
#define IS_LCD_GET_FLAG(FLAG) (((FLAG) == LCD_FLAG_ENS) || ((FLAG) == LCD_FLAG_SOF) || \
((FLAG) == LCD_FLAG_UDR) || ((FLAG) == LCD_FLAG_UDD) || \
((FLAG) == LCD_FLAG_RDY) || ((FLAG) == LCD_FLAG_FCRSF))
#define IS_LCD_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF5) == 0x00) && ((FLAG) != 0x00))
/**
* @}
*/
/** @defgroup LCD_RAMRegister
* @{
*/
#define LCD_RAM_REGISTER0 ((uint32_t)0x00000000) /*!< LCD RAM Register 0 */
#define LCD_RAM_REGISTER1 ((uint32_t)0x00000001) /*!< LCD RAM Register 1 */
#define LCD_RAM_REGISTER2 ((uint32_t)0x00000002) /*!< LCD RAM Register 2 */
#define LCD_RAM_REGISTER3 ((uint32_t)0x00000003) /*!< LCD RAM Register 3 */
#define LCD_RAM_REGISTER4 ((uint32_t)0x00000004) /*!< LCD RAM Register 4 */
#define LCD_RAM_REGISTER5 ((uint32_t)0x00000005) /*!< LCD RAM Register 5 */
#define LCD_RAM_REGISTER6 ((uint32_t)0x00000006) /*!< LCD RAM Register 6 */
#define LCD_RAM_REGISTER7 ((uint32_t)0x00000007) /*!< LCD RAM Register 7 */
#define LCD_RAM_REGISTER8 ((uint32_t)0x00000008) /*!< LCD RAM Register 8 */
#define LCD_RAM_REGISTER9 ((uint32_t)0x00000009) /*!< LCD RAM Register 9 */
#define LCD_RAM_REGISTER10 ((uint32_t)0x0000000A) /*!< LCD RAM Register 10 */
#define LCD_RAM_REGISTER11 ((uint32_t)0x0000000B) /*!< LCD RAM Register 11 */
#define LCD_RAM_REGISTER12 ((uint32_t)0x0000000C) /*!< LCD RAM Register 12 */
#define LCD_RAM_REGISTER13 ((uint32_t)0x0000000D) /*!< LCD RAM Register 13 */
#define LCD_RAM_REGISTER14 ((uint32_t)0x0000000E) /*!< LCD RAM Register 14 */
#define LCD_RAM_REGISTER15 ((uint32_t)0x0000000F) /*!< LCD RAM Register 15 */
#define IS_LCD_RAM_REGISTER(REGISTER) (((REGISTER) == LCD_RAM_REGISTER0) || \
((REGISTER) == LCD_RAM_REGISTER1) || \
((REGISTER) == LCD_RAM_REGISTER2) || \
((REGISTER) == LCD_RAM_REGISTER3) || \
((REGISTER) == LCD_RAM_REGISTER4) || \
((REGISTER) == LCD_RAM_REGISTER5) || \
((REGISTER) == LCD_RAM_REGISTER6) || \
((REGISTER) == LCD_RAM_REGISTER7) || \
((REGISTER) == LCD_RAM_REGISTER8) || \
((REGISTER) == LCD_RAM_REGISTER9) || \
((REGISTER) == LCD_RAM_REGISTER10) || \
((REGISTER) == LCD_RAM_REGISTER11) || \
((REGISTER) == LCD_RAM_REGISTER12) || \
((REGISTER) == LCD_RAM_REGISTER13) || \
((REGISTER) == LCD_RAM_REGISTER14) || \
((REGISTER) == LCD_RAM_REGISTER15))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @brief Reset LCD handle state
* @param __HANDLE__: specifies the LCD Handle.
* @retval None
*/
#define __HAL_LCD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LCD_STATE_RESET)
/** @brief macros to enables or disables the LCD
* @param __HANDLE__: specifies the LCD Handle.
* @retval None
*/
#define __HAL_LCD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LCD_CR_LCDEN)
#define __HAL_LCD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~LCD_CR_LCDEN)
/** @brief Macros to enable or disable the low resistance divider. Displays with high
* internal resistance may need a longer drive time to achieve
* satisfactory contrast. This function is useful in this case if some
* additional power consumption can be tolerated.
* @param __HANDLE__: specifies the LCD Handle.
* @note When this mode is enabled, the PulseOn Duration (PON) have to be
* programmed to 1/CK_PS (LCD_PULSEONDURATION_1).
* @retval None
*/
#define __HAL_LCD_HIGHDRIVER_ENABLE(__HANDLE__) \
do{ \
((__HANDLE__)->Instance->FCR |= LCD_FCR_HD); \
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
#define __HAL_LCD_HIGHDRIVER_DISABLE(__HANDLE__) \
do{ \
((__HANDLE__)->Instance->FCR &= ~LCD_FCR_HD); \
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
/**
* @brief Macro to configure the LCD pulses on duration.
* @param __HANDLE__: specifies the LCD Handle.
* @param __DURATION__: specifies the LCD pulse on duration in terms of
* CK_PS (prescaled LCD clock period) pulses.
* This parameter can be one of the following values:
* @arg LCD_PULSEONDURATION_0: 0 pulse
* @arg LCD_PULSEONDURATION_1: Pulse ON duration = 1/CK_PS
* @arg LCD_PULSEONDURATION_2: Pulse ON duration = 2/CK_PS
* @arg LCD_PULSEONDURATION_3: Pulse ON duration = 3/CK_PS
* @arg LCD_PULSEONDURATION_4: Pulse ON duration = 4/CK_PS
* @arg LCD_PULSEONDURATION_5: Pulse ON duration = 5/CK_PS
* @arg LCD_PULSEONDURATION_6: Pulse ON duration = 6/CK_PS
* @arg LCD_PULSEONDURATION_7: Pulse ON duration = 7/CK_PS
* @retval None
*/
#define __HAL_LCD_PULSEONDURATION_CONFIG(__HANDLE__, __DURATION__) \
do{ \
MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_PON, (__DURATION__)); \
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
/**
* @brief Macro to configure the LCD dead time.
* @param __HANDLE__: specifies the LCD Handle.
* @param __DEADTIME__: specifies the LCD dead time.
* This parameter can be one of the following values:
* @arg LCD_DEADTIME_0: No dead Time
* @arg LCD_DEADTIME_1: One Phase between different couple of Frame
* @arg LCD_DEADTIME_2: Two Phase between different couple of Frame
* @arg LCD_DEADTIME_3: Three Phase between different couple of Frame
* @arg LCD_DEADTIME_4: Four Phase between different couple of Frame
* @arg LCD_DEADTIME_5: Five Phase between different couple of Frame
* @arg LCD_DEADTIME_6: Six Phase between different couple of Frame
* @arg LCD_DEADTIME_7: Seven Phase between different couple of Frame
* @retval None
*/
#define __HAL_LCD_DEADTIME_CONFIG(__HANDLE__, __DEADTIME__) \
do{ \
MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_DEAD, (__DEADTIME__)); \
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
/**
* @brief Macro to configure the LCD Contrast.
* @param __HANDLE__: specifies the LCD Handle.
* @param __CONTRAST__: specifies the LCD Contrast.
* This parameter can be one of the following values:
* @arg LCD_CONTRASTLEVEL_0: Maximum Voltage = 2.60V
* @arg LCD_CONTRASTLEVEL_1: Maximum Voltage = 2.73V
* @arg LCD_CONTRASTLEVEL_2: Maximum Voltage = 2.86V
* @arg LCD_CONTRASTLEVEL_3: Maximum Voltage = 2.99V
* @arg LCD_CONTRASTLEVEL_4: Maximum Voltage = 3.12V
* @arg LCD_CONTRASTLEVEL_5: Maximum Voltage = 3.25V
* @arg LCD_CONTRASTLEVEL_6: Maximum Voltage = 3.38V
* @arg LCD_CONTRASTLEVEL_7: Maximum Voltage = 3.51V
* @retval None
*/
#define __HAL_LCD_CONTRAST_CONFIG(__HANDLE__, __CONTRAST__) \
do{ \
MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_CC, (__CONTRAST__)); \
LCD_WaitForSynchro(__HANDLE__); \
} while(0)
/**
* @brief Macro to configure the LCD Blink mode and Blink frequency.
* @param __HANDLE__: specifies the LCD Handle.
* @param __BLINKMODE__: specifies the LCD blink mode.
* This parameter can be one of the following values:
* @arg LCD_BLINKMODE_OFF: Blink disabled
* @arg LCD_BLINKMODE_SEG0_COM0: Blink enabled on SEG[0], COM[0] (1 pixel)
* @arg LCD_BLINKMODE_SEG0_ALLCOM: Blink enabled on SEG[0], all COM (up to 8
* pixels according to the programmed duty)
* @arg LCD_BLINKMODE_ALLSEG_ALLCOM: Blink enabled on all SEG and all COM
* (all pixels)
* @param __BLINKFREQUENCY__: specifies the LCD blink frequency.
* @arg LCD_BLINKFREQUENCY_DIV8: The Blink frequency = fLcd/8
* @arg LCD_BLINKFREQUENCY_DIV16: The Blink frequency = fLcd/16
* @arg LCD_BLINKFREQUENCY_DIV32: The Blink frequency = fLcd/32
* @arg LCD_BLINKFREQUENCY_DIV64: The Blink frequency = fLcd/64
* @arg LCD_BLINKFREQUENCY_DIV128: The Blink frequency = fLcd/128
* @arg LCD_BLINKFREQUENCY_DIV256: The Blink frequency = fLcd/256
* @arg LCD_BLINKFREQUENCY_DIV512: The Blink frequency = fLcd/512
* @arg LCD_BLINKFREQUENCY_DIV1024: The Blink frequency = fLcd/1024
* @retval None
*/
#define __HAL_LCD_BLINK_CONFIG(__HANDLE__, __BLINKMODE__, __BLINKFREQUENCY__) \
do{ \
MODIFY_REG((__HANDLE__)->Instance->FCR, (LCD_FCR_BLINKF | LCD_FCR_BLINK), ((__BLINKMODE__) | (__BLINKFREQUENCY__))); \
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
/** @brief Enables or disables the specified LCD interrupt.
* @param __HANDLE__: specifies the LCD Handle.
* @param __INTERRUPT__: specifies the LCD interrupt source to be enabled or disabled.
* This parameter can be one of the following values:
* @arg LCD_IT_SOF: Start of Frame Interrupt
* @arg LCD_IT_UDD: Update Display Done Interrupt
* @retval None
*/
#define __HAL_LCD_ENABLE_IT(__HANDLE__, __INTERRUPT__) \
do{ \
((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)); \
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
#define __HAL_LCD_DISABLE_IT(__HANDLE__, __INTERRUPT__) \
do{ \
((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__));\
LCD_WaitForSynchro(__HANDLE__); \
}while(0)
/** @brief Checks whether the specified LCD interrupt is enabled or not.
* @param __HANDLE__: specifies the LCD Handle.
* @param __IT__: specifies the LCD interrupt source to check.
* This parameter can be one of the following values:
* @arg LCD_IT_SOF: Start of Frame Interrupt
* @arg LCD_IT_UDD: Update Display Done Interrupt.
* @note If the device is in STOP mode (PCLK not provided) UDD will not
* generate an interrupt even if UDDIE = 1.
* If the display is not enabled the UDD interrupt will never occur.
* @retval The state of __IT__ (TRUE or FALSE).
*/
#define __HAL_LCD_GET_IT_SOURCE(__HANDLE__, __IT__) (((__HANDLE__)->Instance->FCR) & (__IT__))
/** @brief Checks whether the specified LCD flag is set or not.
* @param __HANDLE__: specifies the LCD Handle.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg LCD_FLAG_ENS: LCD Enabled flag. It indicates the LCD controller status.
* @note The ENS bit is set immediately when the LCDEN bit in the LCD_CR
* goes from 0 to 1. On deactivation it reflects the real status of
* LCD so it becomes 0 at the end of the last displayed frame.
* @arg LCD_FLAG_SOF: Start of Frame flag. This flag is set by hardware at
* the beginning of a new frame, at the same time as the display data is
* updated.
* @arg LCD_FLAG_UDR: Update Display Request flag.
* @arg LCD_FLAG_UDD: Update Display Done flag.
* @arg LCD_FLAG_RDY: Step_up converter Ready flag. It indicates the status
* of the step-up converter.
* @arg LCD_FLAG_FCRSF: LCD Frame Control Register Synchronization Flag.
* This flag is set by hardware each time the LCD_FCR register is updated
* in the LCDCLK domain.
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_LCD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clears the specified LCD pending flag.
* @param __HANDLE__: specifies the LCD Handle.
* @param __FLAG__: specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg LCD_FLAG_SOF: Start of Frame Interrupt
* @arg LCD_FLAG_UDD: Update Display Done Interrupt
* @retval None
*/
#define __HAL_LCD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLR = (__FLAG__))
/* Exported functions ------------------------------------------------------- */
/* Initialization/de-initialization methods **********************************/
HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd);
HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd);
void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd);
void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd);
/* IO operation methods *******************************************************/
HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data);
HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd);
HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd);
/* Peripheral State methods **************************************************/
HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd);
uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd);
/* Private functions ---------------------------------------------------------*/
HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd);
#endif /* STM32L051xx && STM32L052xx && STM32L062xx && STM32L061xx*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L0xx_HAL_LCD_H */
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2014 STMicroelectronics *****END OF FILE****/