Diff: TARGET_NUCLEO_F411RE/stm32f4xx_hal_conf.h

Revision:

99:dbbf35b96557

Parent:

86:04dd9b1680ae

Child:

110:165afa46840b

--- a/TARGET_NUCLEO_F411RE/stm32f4xx_hal_conf.h	Wed Apr 29 10:16:23 2015 +0100
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_conf.h	Wed May 13 08:08:21 2015 +0200
@@ -1,12 +1,10 @@
 /**
   ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
+  * @file    stm32f4xx_hal_conf.h
   * @author  MCD Application Team
   * @version V1.1.0
-  * @date    19-June-2014
-  * @brief   HAL configuration template file. 
-  *          This file should be copied to the application folder and renamed
-  *          to stm32f4xx_hal_conf.h.
+  * @date    26-December-2014
+  * @brief   HAL configuration file
   ******************************************************************************
   * @attention
   *
@@ -52,42 +50,42 @@
 /**
   * @brief This is the list of modules to be used in the HAL driver 
   */
-#define HAL_MODULE_ENABLED  
-#define HAL_ADC_MODULE_ENABLED  
-#define HAL_CAN_MODULE_ENABLED  
-#define HAL_CRC_MODULE_ENABLED  
-#define HAL_CRYP_MODULE_ENABLED  
-#define HAL_DAC_MODULE_ENABLED  
-#define HAL_DCMI_MODULE_ENABLED 
+#define HAL_MODULE_ENABLED         
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
-#define HAL_DMA2D_MODULE_ENABLED 
-#define HAL_ETH_MODULE_ENABLED 
+/* #define HAL_DMA2D_MODULE_ENABLED    */ 
+#define HAL_ETH_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED 
 #define HAL_NAND_MODULE_ENABLED
 #define HAL_NOR_MODULE_ENABLED
 #define HAL_PCCARD_MODULE_ENABLED
 #define HAL_SRAM_MODULE_ENABLED
-#define HAL_SDRAM_MODULE_ENABLED
-#define HAL_HASH_MODULE_ENABLED  
+/* #define HAL_SDRAM_MODULE_ENABLED    */
+#define HAL_HASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
-#define HAL_I2S_MODULE_ENABLED   
-#define HAL_IWDG_MODULE_ENABLED 
-#define HAL_LTDC_MODULE_ENABLED 
-#define HAL_PWR_MODULE_ENABLED   
-#define HAL_RCC_MODULE_ENABLED 
-#define HAL_RNG_MODULE_ENABLED   
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
 #define HAL_RTC_MODULE_ENABLED
-#define HAL_SAI_MODULE_ENABLED   
-#define HAL_SD_MODULE_ENABLED  
-#define HAL_SPI_MODULE_ENABLED   
-#define HAL_TIM_MODULE_ENABLED   
-#define HAL_UART_MODULE_ENABLED 
-#define HAL_USART_MODULE_ENABLED 
-#define HAL_IRDA_MODULE_ENABLED 
-#define HAL_SMARTCARD_MODULE_ENABLED 
-#define HAL_WWDG_MODULE_ENABLED  
-#define HAL_CORTEX_MODULE_ENABLED
+/* #define HAL_SAI_MODULE_ENABLED        */   
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED   
 #define HAL_PCD_MODULE_ENABLED
 #define HAL_HCD_MODULE_ENABLED
 
@@ -103,7 +101,7 @@
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)500)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -119,7 +117,7 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)40000)    
+ #define LSI_VALUE  ((uint32_t)32000)    
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
@@ -147,9 +145,9 @@
   * @brief This is the HAL system configuration section
   */     
 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */
-#define  USE_RTOS                     0
-#define  PREFETCH_ENABLE              1
+#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */           
+#define  USE_RTOS                     0     
+#define  PREFETCH_ENABLE              1              
 #define  INSTRUCTION_CACHE_ENABLE     1
 #define  DATA_CACHE_ENABLE            1
 
@@ -402,6 +400,6 @@
 #endif
 
 #endif /* __STM32F4xx_HAL_CONF_H */
- 
+
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/