Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_MTS_MDOT_F405RG/stm32f4xx_ll_sdmmc.h
- Revision:
- 99:dbbf35b96557
- Parent:
- 92:4fc01daae5a5
- Child:
- 106:ba1f97679dad
--- a/TARGET_MTS_MDOT_F405RG/stm32f4xx_ll_sdmmc.h Wed Apr 29 10:16:23 2015 +0100
+++ b/TARGET_MTS_MDOT_F405RG/stm32f4xx_ll_sdmmc.h Wed May 13 08:08:21 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_ll_sdmmc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
+ * @version V1.3.0
+ * @date 09-March-2015
* @brief Header file of SDMMC HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -50,13 +50,12 @@
* @{
*/
-/** @addtogroup SDMMC
+/** @addtogroup SDMMC_LL
* @{
*/
/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup SDIO_Exported_Types SDIO Exported Types
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
* @{
*/
@@ -143,12 +142,11 @@
*/
/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup SDIO_Exported_Constants
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
* @{
*/
-/** @defgroup SDIO_Clock_Edge
+/** @defgroup SDIO_Clock_Edge Clock Edge
* @{
*/
#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000)
@@ -160,7 +158,7 @@
* @}
*/
-/** @defgroup SDIO_Clock_Bypass
+/** @defgroup SDIO_Clock_Bypass Clock Bypass
* @{
*/
#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000)
@@ -172,7 +170,7 @@
* @}
*/
-/** @defgroup SDIO_Clock_Power_Save
+/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
* @{
*/
#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000)
@@ -184,7 +182,7 @@
* @}
*/
-/** @defgroup SDIO_Bus_Wide
+/** @defgroup SDIO_Bus_Wide Bus Width
* @{
*/
#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000)
@@ -198,7 +196,7 @@
* @}
*/
-/** @defgroup SDIO_Hardware_Flow_Control
+/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
* @{
*/
#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000)
@@ -210,7 +208,7 @@
* @}
*/
-/** @defgroup SDIO_Clock_Division
+/** @defgroup SDIO_Clock_Division Clock Division
* @{
*/
#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF)
@@ -218,7 +216,7 @@
* @}
*/
-/** @defgroup SDIO_Command_Index
+/** @defgroup SDIO_Command_Index Command Index
* @{
*/
#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
@@ -226,7 +224,7 @@
* @}
*/
-/** @defgroup SDIO_Response_Type
+/** @defgroup SDIO_Response_Type Response Type
* @{
*/
#define SDIO_RESPONSE_NO ((uint32_t)0x00000000)
@@ -240,7 +238,7 @@
* @}
*/
-/** @defgroup SDIO_Wait_Interrupt_State
+/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
* @{
*/
#define SDIO_WAIT_NO ((uint32_t)0x00000000)
@@ -254,7 +252,7 @@
* @}
*/
-/** @defgroup SDIO_CPSM_State
+/** @defgroup SDIO_CPSM_State CPSM State
* @{
*/
#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000)
@@ -266,7 +264,7 @@
* @}
*/
-/** @defgroup SDIO_Response_Registers
+/** @defgroup SDIO_Response_Registers Response Register
* @{
*/
#define SDIO_RESP1 ((uint32_t)0x00000000)
@@ -282,7 +280,7 @@
* @}
*/
-/** @defgroup SDIO_Data_Length
+/** @defgroup SDIO_Data_Length Data Lenght
* @{
*/
#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
@@ -290,7 +288,7 @@
* @}
*/
-/** @defgroup SDIO_Data_Block_Size
+/** @defgroup SDIO_Data_Block_Size Data Block Size
* @{
*/
#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000)
@@ -328,7 +326,7 @@
* @}
*/
-/** @defgroup SDIO_Transfer_Direction
+/** @defgroup SDIO_Transfer_Direction Transfer Direction
* @{
*/
#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000)
@@ -340,7 +338,7 @@
* @}
*/
-/** @defgroup SDIO_Transfer_Type
+/** @defgroup SDIO_Transfer_Type Transfer Type
* @{
*/
#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000)
@@ -352,7 +350,7 @@
* @}
*/
-/** @defgroup SDIO_DPSM_State
+/** @defgroup SDIO_DPSM_State DPSM State
* @{
*/
#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000)
@@ -364,11 +362,11 @@
* @}
*/
-/** @defgroup SDIO_Read_Wait_Mode
+/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
* @{
*/
-#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000000)
-#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000001)
+#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000)
+#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001)
#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
((MODE) == SDIO_READ_WAIT_MODE_DATA2))
@@ -376,7 +374,7 @@
* @}
*/
-/** @defgroup SDIO_Interrupt_sources
+/** @defgroup SDIO_Interrupt_sources Interrupt Sources
* @{
*/
#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
@@ -403,13 +401,11 @@
#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
-
-#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
/**
* @}
*/
-/** @defgroup SDIO_Flags
+/** @defgroup SDIO_Flags Flags
* @{
*/
#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
@@ -436,124 +432,77 @@
#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
-
-#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
- ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
- ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
- ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
- ((FLAG) == SDIO_FLAG_TXUNDERR) || \
- ((FLAG) == SDIO_FLAG_RXOVERR) || \
- ((FLAG) == SDIO_FLAG_CMDREND) || \
- ((FLAG) == SDIO_FLAG_CMDSENT) || \
- ((FLAG) == SDIO_FLAG_DATAEND) || \
- ((FLAG) == SDIO_FLAG_STBITERR) || \
- ((FLAG) == SDIO_FLAG_DBCKEND) || \
- ((FLAG) == SDIO_FLAG_CMDACT) || \
- ((FLAG) == SDIO_FLAG_TXACT) || \
- ((FLAG) == SDIO_FLAG_RXACT) || \
- ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
- ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
- ((FLAG) == SDIO_FLAG_TXFIFOF) || \
- ((FLAG) == SDIO_FLAG_RXFIFOF) || \
- ((FLAG) == SDIO_FLAG_TXFIFOE) || \
- ((FLAG) == SDIO_FLAG_RXFIFOE) || \
- ((FLAG) == SDIO_FLAG_TXDAVL) || \
- ((FLAG) == SDIO_FLAG_RXDAVL) || \
- ((FLAG) == SDIO_FLAG_SDIOIT) || \
- ((FLAG) == SDIO_FLAG_CEATAEND))
-
-#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
-
-#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
- ((IT) == SDIO_IT_DCRCFAIL) || \
- ((IT) == SDIO_IT_CTIMEOUT) || \
- ((IT) == SDIO_IT_DTIMEOUT) || \
- ((IT) == SDIO_IT_TXUNDERR) || \
- ((IT) == SDIO_IT_RXOVERR) || \
- ((IT) == SDIO_IT_CMDREND) || \
- ((IT) == SDIO_IT_CMDSENT) || \
- ((IT) == SDIO_IT_DATAEND) || \
- ((IT) == SDIO_IT_STBITERR) || \
- ((IT) == SDIO_IT_DBCKEND) || \
- ((IT) == SDIO_IT_CMDACT) || \
- ((IT) == SDIO_IT_TXACT) || \
- ((IT) == SDIO_IT_RXACT) || \
- ((IT) == SDIO_IT_TXFIFOHE) || \
- ((IT) == SDIO_IT_RXFIFOHF) || \
- ((IT) == SDIO_IT_TXFIFOF) || \
- ((IT) == SDIO_IT_RXFIFOF) || \
- ((IT) == SDIO_IT_TXFIFOE) || \
- ((IT) == SDIO_IT_RXFIFOE) || \
- ((IT) == SDIO_IT_TXDAVL) || \
- ((IT) == SDIO_IT_RXDAVL) || \
- ((IT) == SDIO_IT_SDIOIT) || \
- ((IT) == SDIO_IT_CEATAEND))
-
-#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
/**
* @}
*/
-
-
-/** @defgroup SDIO_Instance_definition
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
* @{
- */
-#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+ */
-/**
- * @}
+/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
+ * @{
*/
-
-/* Exported macro ------------------------------------------------------------*/
/* ------------ SDIO registers bit address in the alias region -------------- */
#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
/* --- CLKCR Register ---*/
/* Alias word address of CLKEN bit */
#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
-#define CLKEN_BitNumber 0x08
-#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+#define CLKEN_BITNUMBER 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4))
/* --- CMD Register ---*/
/* Alias word address of SDIOSUSPEND bit */
#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
-#define SDIOSUSPEND_BitNumber 0x0B
-#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+#define SDIOSUSPEND_BITNUMBER 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4))
/* Alias word address of ENCMDCOMPL bit */
-#define ENCMDCOMPL_BitNumber 0x0C
-#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+#define ENCMDCOMPL_BITNUMBER 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4))
/* Alias word address of NIEN bit */
-#define NIEN_BitNumber 0x0D
-#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+#define NIEN_BITNUMBER 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4))
/* Alias word address of ATACMD bit */
-#define ATACMD_BitNumber 0x0E
-#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+#define ATACMD_BITNUMBER 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4))
/* --- DCTRL Register ---*/
/* Alias word address of DMAEN bit */
#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
-#define DMAEN_BitNumber 0x03
-#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+#define DMAEN_BITNUMBER 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4))
/* Alias word address of RWSTART bit */
-#define RWSTART_BitNumber 0x08
-#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+#define RWSTART_BITNUMBER 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4))
/* Alias word address of RWSTOP bit */
-#define RWSTOP_BitNumber 0x09
-#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+#define RWSTOP_BITNUMBER 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4))
/* Alias word address of RWMOD bit */
-#define RWMOD_BitNumber 0x0A
-#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+#define RWMOD_BITNUMBER 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4))
/* Alias word address of SDIOEN bit */
-#define SDIOEN_BitNumber 0x0B
-#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+#define SDIOEN_BITNUMBER 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4))
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+ * @brief SDMMC_LL registers bit address in the alias region
+ * @{
+ */
/* ---------------------- SDIO registers bit mask --------------------------- */
/* --- CLKCR Register ---*/
@@ -577,41 +526,40 @@
/* SDIO RESP Registers Address */
#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
-/* SDIO Intialization Frequency (400KHz max) */
+/* SDIO Initialization Frequency (400KHz max) */
#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
/* SDIO Data Transfer Frequency (25MHz max) */
#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
+/**
+ * @}
+ */
-/** @defgroup SDIO_Interrupt_Clock
- * @brief macros to handle interrupts and specific clock configurations
- * @{
- */
-
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
/**
* @brief Enable the SDIO device.
- * @param None
* @retval None
*/
#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
/**
* @brief Disable the SDIO device.
- * @param None
* @retval None
*/
#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
/**
* @brief Enable the SDIO DMA transfer.
- * @param None
* @retval None
*/
#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
/**
* @brief Disable the SDIO DMA transfer.
- * @param None
* @retval None
*/
#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
@@ -798,102 +746,89 @@
/**
* @brief Enable Start the SD I/O Read Wait operation.
- * @param None
* @retval None
*/
#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
/**
* @brief Disable Start the SD I/O Read Wait operations.
- * @param None
* @retval None
*/
#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
/**
* @brief Enable Start the SD I/O Read Wait operation.
- * @param None
* @retval None
*/
#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
/**
* @brief Disable Stop the SD I/O Read Wait operations.
- * @param None
* @retval None
*/
#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
/**
* @brief Enable the SD I/O Mode Operation.
- * @param None
* @retval None
*/
#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
/**
* @brief Disable the SD I/O Mode Operation.
- * @param None
* @retval None
*/
#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
/**
* @brief Enable the SD I/O Suspend command sending.
- * @param None
* @retval None
*/
#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
/**
* @brief Disable the SD I/O Suspend command sending.
- * @param None
* @retval None
*/
#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
-
+
+#if !defined(STM32F446xx)
/**
* @brief Enable the command completion signal.
- * @param None
* @retval None
*/
#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
/**
* @brief Disable the command completion signal.
- * @param None
* @retval None
*/
#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
/**
* @brief Enable the CE-ATA interrupt.
- * @param None
* @retval None
*/
#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0)
/**
* @brief Disable the CE-ATA interrupt.
- * @param None
* @retval None
*/
#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1)
/**
* @brief Enable send CE-ATA command (CMD61).
- * @param None
* @retval None
*/
#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
/**
* @brief Disable send CE-ATA command (CMD61).
- * @param None
* @retval None
*/
#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
-
+#endif /* !defined(STM32F446xx) */
/**
* @}
*/
@@ -903,12 +838,12 @@
*/
/* Exported functions --------------------------------------------------------*/
-/** @addtogroup SDIO_Exported_Functions
+/** @addtogroup SDMMC_LL_Exported_Functions
* @{
*/
/* Initialization/de-initialization functions **********************************/
-/** @addtogroup HAL_SDIO_Group1
+/** @addtogroup HAL_SDMMC_LL_Group1
* @{
*/
HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
@@ -917,7 +852,7 @@
*/
/* I/O operation functions *****************************************************/
-/** @addtogroup HAL_SDIO_Group2
+/** @addtogroup HAL_SDMMC_LL_Group2
* @{
*/
/* Blocking mode: Polling */
@@ -928,7 +863,7 @@
*/
/* Peripheral Control functions ************************************************/
-/** @addtogroup HAL_SDIO_Group3
+/** @addtogroup HAL_SDMMC_LL_Group3
* @{
*/
HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);