Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_can.h
- Revision:
- 99:dbbf35b96557
- Parent:
- 92:4fc01daae5a5
- Child:
- 106:ba1f97679dad
--- a/TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_can.h Wed Apr 29 10:16:23 2015 +0100
+++ b/TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_can.h Wed May 13 08:08:21 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_hal_can.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
+ * @version V1.3.0
+ * @date 09-March-2015
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -43,7 +43,9 @@
extern "C" {
#endif
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
@@ -56,52 +58,55 @@
*/
/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
-/**
- * @brief HAL State structures definition
- */
+/**
+ * @brief HAL State structures definition
+ */
typedef enum
{
HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
- HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
- HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
HAL_CAN_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
}HAL_CAN_StateTypeDef;
-/**
+/**
* @brief CAN init structure definition
*/
typedef struct
{
- uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
-
+
uint32_t Mode; /*!< Specifies the CAN operating mode.
This parameter can be a value of @ref CAN_operating_mode */
- uint32_t SJW; /*!< Specifies the maximum number of time quanta
- the CAN hardware is allowed to lengthen or
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
shorten a bit to perform resynchronization.
This parameter can be a value of @ref CAN_synchronisation_jump_width */
- uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
-
+
uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
-
+
uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
This parameter can be set to ENABLE or DISABLE. */
-
+
uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
This parameter can be set to ENABLE or DISABLE */
- uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
@@ -114,33 +119,33 @@
This parameter can be set to ENABLE or DISABLE */
}CAN_InitTypeDef;
-/**
+/**
* @brief CAN filter configuration structure definition
*/
typedef struct
{
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
configuration, first one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
configuration, second one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
according to the mode (MSBs for a 32-bit configuration,
first one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
according to the mode (LSBs for a 32-bit configuration,
second one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
This parameter can be a value of @ref CAN_filter_FIFO */
-
- uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
@@ -151,50 +156,50 @@
uint32_t FilterActivation; /*!< Enable or disable the filter.
This parameter can be set to ENABLE or DISABLE. */
-
+
uint32_t BankNumber; /*!< Select the start slave bank filter.
- This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
-
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
}CAN_FilterConfTypeDef;
-/**
- * @brief CAN Tx message structure definition
+/**
+ * @brief CAN Tx message structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
-
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
uint32_t ExtId; /*!< Specifies the extended identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
-
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
- This parameter can be a value of @ref CAN_identifier_type */
+ This parameter can be a value of @ref CAN_Identifier_Type */
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
- This parameter can be a value of @ref CAN_remote_transmission_request */
+ This parameter can be a value of @ref CAN_remote_transmission_request */
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
- uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ uint8_t Data[8]; /*!< Contains the data to be transmitted.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
-
+
}CanTxMsgTypeDef;
-/**
- * @brief CAN Rx message structure definition
+/**
+ * @brief CAN Rx message structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
uint32_t ExtId; /*!< Specifies the extended identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
- uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
- This parameter can be a value of @ref CAN_identifier_type */
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_Identifier_Type */
uint32_t RTR; /*!< Specifies the type of frame for the received message.
This parameter can be a value of @ref CAN_remote_transmission_request */
@@ -202,49 +207,52 @@
uint32_t DLC; /*!< Specifies the length of the frame that will be received.
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
- uint32_t Data[8]; /*!< Contains the data to be received.
+ uint8_t Data[8]; /*!< Contains the data to be received.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
-
- uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
This parameter can be CAN_FIFO0 or CAN_FIFO1 */
-
+
}CanRxMsgTypeDef;
-/**
- * @brief CAN handle Structure definition
- */
+/**
+ * @brief CAN handle Structure definition
+ */
typedef struct
{
CAN_TypeDef *Instance; /*!< Register base address */
-
+
CAN_InitTypeDef Init; /*!< CAN required parameters */
-
+
CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
-
+
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
-
+
HAL_LockTypeDef Lock; /*!< CAN locking object */
-
+
__IO uint32_t ErrorCode; /*!< CAN Error code */
-
+
}CAN_HandleTypeDef;
-/* Exported constants --------------------------------------------------------*/
+/**
+ * @}
+ */
-/** @defgroup CAN_Exported_Constants
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
* @{
*/
-/** @defgroup HAL CAN Error Code
+/** @defgroup HAL_CAN_Error_Code HAL CAN Error Code
* @{
*/
#define HAL_CAN_ERROR_NONE 0x00 /*!< No error */
-#define HAL_CAN_ERROR_EWG 0x01 /*!< EWG error */
+#define HAL_CAN_ERROR_EWG 0x01 /*!< EWG error */
#define HAL_CAN_ERROR_EPV 0x02 /*!< EPV error */
#define HAL_CAN_ERROR_BOF 0x04 /*!< BOF error */
#define HAL_CAN_ERROR_STF 0x08 /*!< Stuff error */
@@ -255,10 +263,9 @@
#define HAL_CAN_ERROR_CRC 0x100 /*!< LEC transfer error */
/**
* @}
- */
+ */
-
-/** @defgroup CAN_InitStatus
+/** @defgroup CAN_InitStatus CAN InitStatus
* @{
*/
#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */
@@ -267,38 +274,29 @@
* @}
*/
-/** @defgroup CAN_operating_mode
+/** @defgroup CAN_operating_mode CAN Operating Mode
* @{
*/
#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
-
-#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
- ((MODE) == CAN_MODE_LOOPBACK)|| \
- ((MODE) == CAN_MODE_SILENT) || \
- ((MODE) == CAN_MODE_SILENT_LOOPBACK))
/**
* @}
*/
-
-/** @defgroup CAN_synchronisation_jump_width
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
* @{
*/
#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
-
-#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
- ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
/**
* @}
*/
-/** @defgroup CAN_time_quantum_in_bit_segment_1
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
* @{
*/
#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
@@ -317,13 +315,11 @@
#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
-
-#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
/**
* @}
*/
-/** @defgroup CAN_time_quantum_in_bit_segment_2
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
* @{
*/
#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
@@ -334,138 +330,70 @@
#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
-
-#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
/**
* @}
*/
-/** @defgroup CAN_clock_prescaler
- * @{
- */
-#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
-/**
- * @}
- */
-
-/** @defgroup CAN_filter_number
- * @{
- */
-#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
-/**
- * @}
- */
-
-/** @defgroup CAN_filter_mode
+/** @defgroup CAN_filter_mode CAN Filter Mode
* @{
*/
#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
-
-#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
- ((MODE) == CAN_FILTERMODE_IDLIST))
/**
* @}
*/
-/** @defgroup CAN_filter_scale
+/** @defgroup CAN_filter_scale CAN Filter Scale
* @{
*/
#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
-
-#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
- ((SCALE) == CAN_FILTERSCALE_32BIT))
/**
* @}
*/
-/** @defgroup CAN_filter_FIFO
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
* @{
*/
#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
-
-#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
- ((FIFO) == CAN_FILTER_FIFO1))
-
-/* Legacy defines */
-#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
-#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
/**
* @}
*/
-/** @defgroup CAN_Start_bank_filter_for_slave_CAN
+/** @defgroup CAN_Identifier_Type CAN Identifier Type
* @{
*/
-#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
/**
* @}
*/
-/** @defgroup CAN_Tx
- * @{
- */
-#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
-#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
-#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
-#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
-/**
- * @}
- */
-
-/** @defgroup CAN_identifier_type
- * @{
- */
-#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
-#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
-#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
- ((IDTYPE) == CAN_ID_EXT))
-/**
- * @}
- */
-
-/** @defgroup CAN_remote_transmission_request
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
* @{
*/
#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
-#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
-
-/**
- * @}
- */
-
-/** @defgroup CAN_transmit_constants
- * @{
- */
-#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
-#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
-#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
-#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
-
/**
* @}
*/
-/** @defgroup CAN_receive_FIFO_number_constants
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
* @{
*/
#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
-
-#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
/**
* @}
*/
-/** @defgroup CAN_flags
+/** @defgroup CAN_flags CAN Flags
* @{
*/
/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
and CAN_ClearFlag() functions. */
-/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
CAN_GetFlagStatus() function. */
/* Transmit Flags */
@@ -490,35 +418,20 @@
#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
-/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
In this case the SLAK bit can be polled.*/
/* Error Flags */
#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
-
-#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_BOF) || \
- ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
- ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
- ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_SLAK) || \
- ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
- ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0))
-
-
-#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_SLAK) || ((FLAG) == CAN_FLAG_RQCP2) || \
- ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
- ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) || \
- ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
- ((FLAG) == CAN_FLAG_WKU))
/**
* @}
*/
-
-/** @defgroup CAN_interrupts
+/** @defgroup CAN_Interrupts CAN Interrupts
* @{
- */
+ */
#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
/* Receive Interrupts */
@@ -539,45 +452,28 @@
#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
-
-/* Flags named as Interrupts : kept only for FW compatibility */
-#define CAN_IT_RQCP0 CAN_IT_TME
-#define CAN_IT_RQCP1 CAN_IT_TME
-#define CAN_IT_RQCP2 CAN_IT_TME
-
-#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
- ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
- ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
- ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
- ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
- ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
- ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
-
-#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
- ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
- ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
- ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
- ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
- ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
/**
* @}
*/
-/* Time out for INAK bit */
-#define INAK_TIMEOUT ((uint32_t)0x0000FFFF)
-/* Time out for SLAK bit */
-#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF)
-
-/* Mailboxes definition */
+/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
+ * @{
+ */
#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+/**
+ * @}
+ */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
/** @brief Reset CAN handle state
* @param __HANDLE__: specifies the CAN Handle.
@@ -637,7 +533,6 @@
* @arg CAN_FLAG_BOF: Bus-Off Flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
-#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
@@ -684,7 +579,7 @@
* @param __INTERRUPT__: specifies the CAN interrupt source to check.
* This parameter can be one of the following values:
* @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
- * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
* @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
* @retval The new state of __IT__ (TRUE or FALSE).
*/
@@ -701,8 +596,6 @@
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
-
-
/**
* @brief Release the specified receive FIFO.
* @param __HANDLE__: CAN handle
@@ -710,7 +603,7 @@
* @retval None
*/
#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
-((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
/**
* @brief Cancel a transmit request.
@@ -726,24 +619,40 @@
/**
* @brief Enable or disable the DBG Freeze for CAN.
* @param __HANDLE__: CAN Handle
- * @param __NEWSTATE__: new state of the CAN peripheral.
+ * @param __NEWSTATE__: new state of the CAN peripheral.
* This parameter can be: ENABLE (CAN reception/transmission is frozen
- * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
* or DISABLE (CAN is working during debug).
* @retval None
*/
#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
-((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
-
-/* Exported functions --------------------------------------------------------*/
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
-/* Initialization/de-initialization functions ***********************************/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ***********************************/
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+/** @addtogroup CAN_Exported_Functions_Group2
+ * @{
+ */
/* I/O operation functions ******************************************************/
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
@@ -751,17 +660,102 @@
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
-
-/* Peripheral State functions ***************************************************/
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
-uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
-HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
-
void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/** @addtogroup CAN_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+ * @{
+ */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+ * @{
+ */
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Functions CAN Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
/**
* @}