Ricardo Benitez / mbed

Fork of mbed by mbed official

Revision:
90:cb3d968589d8
Parent:
89:552587b429a1
Child:
91:031413cf7a89
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_gpio.h	Fri Sep 12 16:41:52 2014 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,368 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_gpio.h
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    16-January-2014
-  * @brief   This file contains all the functions prototypes for the GPIO 
-  *          firmware library. 
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_GPIO_H
-#define __STM32F0XX_GPIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup GPIO
-  * @{
-  */
-/* Exported types ------------------------------------------------------------*/
-
-#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
-                                    ((PERIPH) == GPIOB) || \
-                                    ((PERIPH) == GPIOC) || \
-                                    ((PERIPH) == GPIOD) || \
-                                    ((PERIPH) == GPIOE) || \
-                                    ((PERIPH) == GPIOF))
-
-#define IS_GPIO_LIST_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
-                                     ((PERIPH) == GPIOB))
-
-/** @defgroup Configuration_Mode_enumeration 
-  * @{
-  */
-typedef enum
-{
-  GPIO_Mode_IN   = 0x00, /*!< GPIO Input Mode              */
-  GPIO_Mode_OUT  = 0x01, /*!< GPIO Output Mode             */
-  GPIO_Mode_AF   = 0x02, /*!< GPIO Alternate function Mode */
-  GPIO_Mode_AN   = 0x03  /*!< GPIO Analog In/Out Mode      */
-}GPIOMode_TypeDef;
-
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN)|| ((MODE) == GPIO_Mode_OUT) || \
-                            ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
-/**
-  * @}
-  */
-
-/** @defgroup Output_type_enumeration
-  * @{
-  */
-typedef enum
-{
-  GPIO_OType_PP = 0x00,
-  GPIO_OType_OD = 0x01
-}GPIOOType_TypeDef;
-
-#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
-
-/**
-  * @}
-  */
-
-/** @defgroup Output_Maximum_frequency_enumeration 
-  * @{
-  */
-typedef enum
-{
-  GPIO_Speed_Level_1  = 0x00, /*!< I/O output speed: Low 2 MHz */
-  GPIO_Speed_Level_2  = 0x01, /*!< I/O output speed: Medium 10 MHz */
-  GPIO_Speed_Level_3  = 0x03  /*!< I/O output speed: High 50 MHz */
-}GPIOSpeed_TypeDef;
-
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_Level_1) || ((SPEED) == GPIO_Speed_Level_2) || \
-                              ((SPEED) == GPIO_Speed_Level_3))
-/**
-  * @}
-  */
-
-/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration 
-  * @{
-  */
-typedef enum
-{
-  GPIO_PuPd_NOPULL = 0x00,
-  GPIO_PuPd_UP     = 0x01,
-  GPIO_PuPd_DOWN   = 0x02
-}GPIOPuPd_TypeDef;
-
-#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
-                            ((PUPD) == GPIO_PuPd_DOWN))
-/**
-  * @}
-  */
-
-/** @defgroup Bit_SET_and_Bit_RESET_enumeration
-  * @{
-  */
-typedef enum
-{ 
-  Bit_RESET = 0,
-  Bit_SET
-}BitAction;
-
-#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
-/**
-  * @}
-  */
-
-/**
-  * @brief  GPIO Init structure definition  
-  */
-typedef struct
-{
-  uint32_t GPIO_Pin;              /*!< Specifies the GPIO pins to be configured.
-                                       This parameter can be any value of @ref GPIO_pins_define */
-                                       
-  GPIOMode_TypeDef GPIO_Mode;     /*!< Specifies the operating mode for the selected pins.
-                                       This parameter can be a value of @ref GPIOMode_TypeDef   */
-
-  GPIOSpeed_TypeDef GPIO_Speed;   /*!< Specifies the speed for the selected pins.
-                                       This parameter can be a value of @ref GPIOSpeed_TypeDef  */
-
-  GPIOOType_TypeDef GPIO_OType;   /*!< Specifies the operating output type for the selected pins.
-                                       This parameter can be a value of @ref GPIOOType_TypeDef  */
-
-  GPIOPuPd_TypeDef GPIO_PuPd;     /*!< Specifies the operating Pull-up/Pull down for the selected pins.
-                                       This parameter can be a value of @ref GPIOPuPd_TypeDef   */
-}GPIO_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup GPIO_Exported_Constants
-  * @{
-  */
-
-/** @defgroup GPIO_pins_define 
-  * @{
-  */
-#define GPIO_Pin_0                 ((uint16_t)0x0001)  /*!< Pin 0 selected    */
-#define GPIO_Pin_1                 ((uint16_t)0x0002)  /*!< Pin 1 selected    */
-#define GPIO_Pin_2                 ((uint16_t)0x0004)  /*!< Pin 2 selected    */
-#define GPIO_Pin_3                 ((uint16_t)0x0008)  /*!< Pin 3 selected    */
-#define GPIO_Pin_4                 ((uint16_t)0x0010)  /*!< Pin 4 selected    */
-#define GPIO_Pin_5                 ((uint16_t)0x0020)  /*!< Pin 5 selected    */
-#define GPIO_Pin_6                 ((uint16_t)0x0040)  /*!< Pin 6 selected    */
-#define GPIO_Pin_7                 ((uint16_t)0x0080)  /*!< Pin 7 selected    */
-#define GPIO_Pin_8                 ((uint16_t)0x0100)  /*!< Pin 8 selected    */
-#define GPIO_Pin_9                 ((uint16_t)0x0200)  /*!< Pin 9 selected    */
-#define GPIO_Pin_10                ((uint16_t)0x0400)  /*!< Pin 10 selected   */
-#define GPIO_Pin_11                ((uint16_t)0x0800)  /*!< Pin 11 selected   */
-#define GPIO_Pin_12                ((uint16_t)0x1000)  /*!< Pin 12 selected   */
-#define GPIO_Pin_13                ((uint16_t)0x2000)  /*!< Pin 13 selected   */
-#define GPIO_Pin_14                ((uint16_t)0x4000)  /*!< Pin 14 selected   */
-#define GPIO_Pin_15                ((uint16_t)0x8000)  /*!< Pin 15 selected   */
-#define GPIO_Pin_All               ((uint16_t)0xFFFF)  /*!< All pins selected */
-
-#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00)
-
-#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
-                              ((PIN) == GPIO_Pin_1) || \
-                              ((PIN) == GPIO_Pin_2) || \
-                              ((PIN) == GPIO_Pin_3) || \
-                              ((PIN) == GPIO_Pin_4) || \
-                              ((PIN) == GPIO_Pin_5) || \
-                              ((PIN) == GPIO_Pin_6) || \
-                              ((PIN) == GPIO_Pin_7) || \
-                              ((PIN) == GPIO_Pin_8) || \
-                              ((PIN) == GPIO_Pin_9) || \
-                              ((PIN) == GPIO_Pin_10) || \
-                              ((PIN) == GPIO_Pin_11) || \
-                              ((PIN) == GPIO_Pin_12) || \
-                              ((PIN) == GPIO_Pin_13) || \
-                              ((PIN) == GPIO_Pin_14) || \
-                              ((PIN) == GPIO_Pin_15))
-
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Pin_sources 
-  * @{
-  */
-#define GPIO_PinSource0            ((uint8_t)0x00)
-#define GPIO_PinSource1            ((uint8_t)0x01)
-#define GPIO_PinSource2            ((uint8_t)0x02)
-#define GPIO_PinSource3            ((uint8_t)0x03)
-#define GPIO_PinSource4            ((uint8_t)0x04)
-#define GPIO_PinSource5            ((uint8_t)0x05)
-#define GPIO_PinSource6            ((uint8_t)0x06)
-#define GPIO_PinSource7            ((uint8_t)0x07)
-#define GPIO_PinSource8            ((uint8_t)0x08)
-#define GPIO_PinSource9            ((uint8_t)0x09)
-#define GPIO_PinSource10           ((uint8_t)0x0A)
-#define GPIO_PinSource11           ((uint8_t)0x0B)
-#define GPIO_PinSource12           ((uint8_t)0x0C)
-#define GPIO_PinSource13           ((uint8_t)0x0D)
-#define GPIO_PinSource14           ((uint8_t)0x0E)
-#define GPIO_PinSource15           ((uint8_t)0x0F)
-
-#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
-                                       ((PINSOURCE) == GPIO_PinSource1) || \
-                                       ((PINSOURCE) == GPIO_PinSource2) || \
-                                       ((PINSOURCE) == GPIO_PinSource3) || \
-                                       ((PINSOURCE) == GPIO_PinSource4) || \
-                                       ((PINSOURCE) == GPIO_PinSource5) || \
-                                       ((PINSOURCE) == GPIO_PinSource6) || \
-                                       ((PINSOURCE) == GPIO_PinSource7) || \
-                                       ((PINSOURCE) == GPIO_PinSource8) || \
-                                       ((PINSOURCE) == GPIO_PinSource9) || \
-                                       ((PINSOURCE) == GPIO_PinSource10) || \
-                                       ((PINSOURCE) == GPIO_PinSource11) || \
-                                       ((PINSOURCE) == GPIO_PinSource12) || \
-                                       ((PINSOURCE) == GPIO_PinSource13) || \
-                                       ((PINSOURCE) == GPIO_PinSource14) || \
-                                       ((PINSOURCE) == GPIO_PinSource15))
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Alternate_function_selection_define 
-  * @{
-  */
-
-/** 
-  * @brief  AF 0 selection
-  */
-#define GPIO_AF_0            ((uint8_t)0x00) /* WKUP, EVENTOUT, TIM15, SPI1, TIM17,
-                                                MCO, SWDAT, SWCLK, TIM14, BOOT,
-                                                USART1, CEC, IR_OUT, SPI2, TS, TIM3,
-                                                USART4, CAN, TIM3, USART2, USART3, 
-                                                CRS, TIM16, TIM1 */
-/** 
-  * @brief  AF 1 selection
-  */
-#define GPIO_AF_1            ((uint8_t)0x01) /* USART2, CEC, TIM3, USART1, IR,
-                                                EVENTOUT, I2C1, I2C2, TIM15, SPI2,
-                                                USART3, TS, SPI1 */
-/** 
-  * @brief  AF 2 selection
-  */
-#define GPIO_AF_2            ((uint8_t)0x02) /* TIM2, TIM1, EVENTOUT, TIM16, TIM17,
-                                                USB */
-/** 
-  * @brief  AF 3 selection
-  */
-#define GPIO_AF_3            ((uint8_t)0x03) /* TS, I2C1, TIM15, EVENTOUT */
-
-/** 
-  * @brief  AF 4 selection
-  */
-#define GPIO_AF_4            ((uint8_t)0x04) /* TIM14, USART4, USART3, CRS, CAN,
-                                                I2C1 */
-
-/** 
-  * @brief  AF 5 selection
-  */
-#define GPIO_AF_5            ((uint8_t)0x05) /* TIM16, TIM17, TIM15, SPI2, I2C2, 
-                                                MCO, I2C1, USB */
-
-/** 
-  * @brief  AF 6 selection
-  */
-#define GPIO_AF_6            ((uint8_t)0x06) /* EVENTOUT */
-/** 
-  * @brief  AF 7 selection
-  */
-#define GPIO_AF_7            ((uint8_t)0x07) /* COMP1 OUT and COMP2 OUT */
-
-#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF_0) || ((AF) == GPIO_AF_1) || \
-                          ((AF) == GPIO_AF_2) || ((AF) == GPIO_AF_3) || \
-                          ((AF) == GPIO_AF_4) || ((AF) == GPIO_AF_5) || \
-                          ((AF) == GPIO_AF_6) || ((AF) == GPIO_AF_7))
-
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Speed_Legacy 
-  * @{
-  */
-
-#define GPIO_Speed_2MHz  GPIO_Speed_Level_1   /*!< I/O output speed: Low 2 MHz  */
-#define GPIO_Speed_10MHz GPIO_Speed_Level_2   /*!< I/O output speed: Medium 10 MHz */
-#define GPIO_Speed_50MHz GPIO_Speed_Level_3   /*!< I/O output speed: High 50 MHz */
-  
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-/* Function used to set the GPIO configuration to the default reset state *****/
-void GPIO_DeInit(GPIO_TypeDef* GPIOx);
-
-/* Initialization and Configuration functions *********************************/
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-
-/* GPIO Read and Write functions **********************************************/
-uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
-uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
-void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
-void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
-
-/* GPIO Alternate functions configuration functions ***************************/
-void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_GPIO_H */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/